The previous approac of just purging the alias combined with the fact
that we filled in fake machine types in the test data meant that if a
test case used an alias machine type such as 'pc' or 'q35' it would not
properly resolve to the actual data returned by qemu.

This started to be a problem since the CPU driver now looks at the
default CPU reported with the machine type.

This patch replaces the original approach of just removing the alias by
replacing it with a copy of the machine type data which the type would
alias to. This means that we are using the real data while we don't
modify the test output after every qemu upgrade.

Additionally this change will allow us to drop adding the fake machine
types later.

The test fallout is from actually excercising the CPU driver with
actual data.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Use the existing fs9p.xml and fs9p-ccw.xml to run the tests
with latest caps on x86_64 and s390x.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Acked-by: NPeter Krempa <pkrempa@redhat.com>

The '-realtime mlock' cmd line argument was introduced in QEMU
commit v1.5.0-rc0~190 which matches minimal QEMU version we
require. Therefore, the capability will always be present.

Apparently, nearly none of our xml2argv test cases had the
capability hence slightly bigger change under qemuxml2argvdata/.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

By default, qemu user's home dir points to '/' which shouldn't be used
at all. We therefore pass the HOME variable from the current variable
iff not running as SUID, which means that for systemd we never set it.
This patch makes sure, that for system QEMU this is always set to
libDir/<driver>, session mode is left untouched.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

For session mode, only XDG_CACHE_HOME is set, because we want to remain
integrating with services in user session, but for system mode, this
would have become reading/writing to '/' which carries the obvious issue
with permissions (also, '/' is the wrong location in 99.9% cases anyway).
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

The field was added in qemu v0.13.0-rc0-731-g1ca4d09ae0 so all supported
qemu versions now use it.

There's a LOT of test fallout as we did not use capabilities close
enough to upstream for many of our tests.

Several tests had a 'bootindex' variant. Since they'd become redundant
they are also removed here.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Implied by QEMU >= 1.3.0.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Implied by QEMU >= 1.2.0.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Implied by QEMU >= 1.2.0.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Implied by QEMU >= 1.2.0.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Implied by QEMU >= 1.2.0.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Implied by QEMU >= 1.2.0.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Implied by QEMU >= 1.2.0.

Delete this one first, because QEMU_CAPS_NODEFCONFIG is only used
when QEMU_CAPS_NO_USER_CONFIG is unsupported.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

We require QEMU >= 1.5.0, assume every QEMU supports it.
Sadly that does not let us trivially drop qemuMonitor's
priv->monJSON bool, because of qemuDomainQemuAttach.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Similarly to the previous commit, rename .args files.

The files were renamed using the following commands. From
qemuxml2argvdata:

  for i in qemuxml2argv-*.args; do mv $i ${i#qemuxml2argv-}; done

and then (to fix broken symlinks) from qemuxml2argvdata and
qemuxml2xmloutdata:

  for i in $(find . -xtype l); do \
      ln -sf $(readlink $i | sed 's/qemuxml2argv-//') $i;
  done
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

AFAIK there aren't any cases where we will/should hit the old code
path for our supported qemu versions, so drop the old code.

Massive test suite churn follows
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Our test data used a lot of different qemu binary paths and some
of them were based on downstream systems.

Note that there is one file where I had to add "accel=kvm" because
the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm".
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

The capabilities used in test cases should match those used
during normal operation for the tests to make any sense.

This results in the generated command line for a few test
cases (most notably non-x86 test cases that were wrongly
assuming they could use -no-acpi) changing.

For every but the last argument, we also need space for a space
and a backslash.

Rewrap everything longer than 78 characters.

Support for SMP topology was added by qemu commit dc6b1c09849484fbbc50
prior to 0.12.0, our minimum supported qemu version.

$ git describe --tags dc6b1c09849484fbbc50803307e4c7a3d81eab62
v0.11.0-rc0-449-gdc6b1c0
$ git describe --tags --contains dc6b1c09849484fbbc50803307e4c7a3d81eab
v0.12.0-rc0~1477

Per-domain directories were introduced in order to be able to
completely separate security labels for each domain (commit
f1f68ca3).  However when the domain
name is long (let's say a ridiculous 110 characters), we cannot
connect to the monitor socket because on length of UNIX socket address
is limited.  In order to get around this, let's shorten it in similar
fashion and in order to avoid conflicts, throw in an ID there as well.
Also save that into the status XML and load the old status XMLs
properly (to clean up after older domains).  That way we can change it
in the future.

The shortening can be seen in qemuxml2argv tests, for example in the
hugepages-pages2 case.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Just recently, qemu forbade specifying format for sourceless
disks (qemu commit 39c4ae941ed992a3bb5). It kind of makes sense.
If there's no file to open, why specify its format. Anyway, I
have a domain like this:

    <disk type='file' device='cdrom'>
      <driver name='qemu' type='raw'/>
      <target dev='hda' bus='ide'/>
      <readonly/>
      <address type='drive' controller='0' bus='0' target='0' unit='0'/>
    </disk>

and obviously I am unable to start it. Therefore, a fix on our
side is needed too.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

As of QEMU 0.10.0 the -drive format= parameter was added,
so the QEMU driver can assume it is always available.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The -uuid arg was added in QEMU 0.10.0, so the QEMU driver can
assume it is always available.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The -name arg was added in QEMU 0.9.1, so the QEMU driver can
assume it is always available.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Back in

  commit bd6c46fa
  Author: Juerg Haefliger <juerg.haefliger@hp.com>
  Date:   Mon Jan 31 06:42:57 2011 -0500

    tests: handle backspace-newline pairs in test input files

all the test argv files were line wrapped so that the args
were less than 80 characters.

The way the line wrapping was done turns out to be quite
undesirable, because it often leaves multiple parameters
on the same line. If we later need to add or remove
individual parameters, then it leaves us having to redo
line wrapping.

This commit changes the line wrapping so that every
single "-param value" is one its own new line. If the
"value" is still too long, then we break on ',' or ':'
or ' ' as needed.

This means that when we come to add / remove parameters
from the test files line, the patch diffs will only
ever show a single line added/removed which will greatly
simplify review work.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This patch adds a test for the qemu command line generation.
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: NJason J. Herne <jjherne@us.ibm.com>
Reviewed-by: NStefan Zimmermann <stzi@linux.vnet.ibm.com>