If we don't escape ' or \ xend can't parse the generated sexpr. This
might over apply the EscapeSexpr routine, but it shouldn't hurt.

This patch series focuses on xendConfigVersion 2 (xm_internal) and 3
(xend_internal), but leaves out changes for xenapi drivers.

See this link for more details about vcpu_avail for xm usage.
http://lists.xensource.com/archives/html/xen-devel/2009-11/msg01061.html

This relies on the fact that def->maxvcpus can be at most 32 with xen.

* src/xen/xend_internal.c (xenDaemonParseSxpr)
(sexpr_to_xend_domain_info, xenDaemonFormatSxpr): Use vcpu_avail
when current vcpus is less than maximum.
* src/xen/xm_internal.c (xenXMDomainConfigParse)
(xenXMDomainConfigFormat): Likewise.
* tests/xml2sexprdata/xml2sexpr-pv-vcpus.sexpr: New file.
* tests/sexpr2xmldata/sexpr2xml-pv-vcpus.sexpr: Likewise.
* tests/sexpr2xmldata/sexpr2xml-pv-vcpus.xml: Likewise.
* tests/xmconfigdata/test-paravirt-vcpu.cfg: Likewise.
* tests/xmconfigdata/test-paravirt-vcpu.xml: Likewise.
* tests/xml2sexprtest.c (mymain): New test.
* tests/sexpr2xmltest.c (mymain): Likewise.
* tests/xmconfigtest.c (mymain): Likewise.

Syntax agreed on in
https://www.redhat.com/archives/libvir-list/2010-September/msg00476.html

<domain ...>
  <vcpu current='x'>y</vcpu>
...

can now be used to specify 1 <= x <= y current vcpus, in relation
to the boot-time max of y vcpus.  If current is omitted, then
current and max are assumed to be the same value.

* docs/schemas/domain.rng: Add new attribute.
* docs/formatdomain.html.in: Document it.
* tests/qemuxml2argvdata/qemuxml2argv-smp.xml: Add to
domainschematest.
* tests/xml2sexprdata/xml2sexpr-pv-vcpus.xml: Likewise.

Failure introduced in commit 3a092f38.

* tests/xml2sexprdata/xml2sexpr-boot-grub.sexpr: Fix typo.

* src/xen/sexpr.c: Ensure () are escaped in sexpr2string
* tests/sexpr2xmldata/sexpr2xml-boot-grub.sexpr,
  tests/sexpr2xmldata/sexpr2xml-boot-grub.xml,
  tests/xml2sexprdata/xml2sexpr-boot-grub.sexpr,
  tests/xml2sexprdata/xml2sexpr-boot-grub.xml: Data files to
  check escaping
* tests/sexpr2xmltest.c, tests/xml2sexprtest.c: Add boot-grub
  escaping test case

xml2sexpr and sexpr2xml tests for blktap2

This caused unnecessary make check failures when libvirt is configured
--with-rhel5-api

The most common cause of errors with rhel5-api turn on was missing
"(type ioemu)" in sexpr or its equivalent in XM configuration file. This
happens because the presence of that part in sexpr (or cfg) depends on
xen version the host is running. Let's avoid it by explicitly specifying
interface model which ensures "type ioemu" will always be emitted.

This patch adds

    <model type='e1000'/>

withing the interface element in all affected xml files. And

    (model 'e1000')

to all corresponding sexpr files with similar fix to cfg files. Such
configuration works regardless on Xen version.

* .hgignore: Delete, no longer used.
* examples/python/.gitignore: Delete, covered globally.
* include/.gitignore: Likewise.
* python/tests/.gitignore: Likewise.
* docs/schemas/.gitignore: Likewise.
* tests/xml2sexprdata/.gitignore: Likewise.
* tests/sexpr2xmldata/.gitignore: Likewise.
* tests/confdata/.gitignore: Likewise.
* tests/xencapsdata/.gitignore: Likewise.
* tests/xmconfigdata/.gitignore: Likewise.
* tests/xml2sexprdata/.gitignore: Likewise.

'listen' isn't a valid qemu-dm option, as reported a long time ago here:

https://bugzilla.redhat.com/show_bug.cgi?id=492958

Matches the near identical logic in qemu_conf.c

v2: When parsing sexpr, only match on ",server", rather than
    full ',server,nowait'.

* tests/xml2sexprdata/xml2sexpr-curmem.xml: Remove ":disk" suffix from
"<target dev=" value.
* tests/xml2sexprdata/xml2sexpr-pv-localtime.xml: Likewise.
* tests/xml2sexprdata/xml2sexpr-curmem.sexpr: Update expected output
to match.
* tests/xml2sexprdata/xml2sexpr-pv-localtime.sexpr: Likewise.

* tests/xencapsdata/Makefile.am: Use $(wildcard in $(srcdir)-aware manner
* tests/xmconfigdata/Makefile.am: Likewise.
* tests/xml2sexprdata/Makefile.am: Likewise.
* tests/sexpr2xmldata/Makefile.am (EXTRA_DIST): Likewise.
* Makefile.am (XML_EXAMPLES): Use $(wildcard in $(srcdir)-aware manner.

It is perfectly acceptable to have multiple sound devices of
same type in guest configuration. If the underlying hypervisor
does not like this, it is its job to complain, not the XML
parser's

* src/conf/domain_conf.c: Remove hack which deleted duplicated
  sound device models.
* tests/xml2sexprdata/xml2sexpr-fv-sound.xml: Remove duplicate
  models

add a set of tests for Xen interface type and model configurations

Calling qsort() on the disks array causes disk to be
unneccessarily re-ordered, potentially breaking the
ability to boot if the boot disk gets moved later in
the list. The new algorithm will insert a new disk as
far to the end of the list as possible, while being
ordered correctly wrt other disks on the same bus.

* src/domain_conf.c, src/domain_conf.h: Remove disk sorting
  routines. Add API to insert a disk into existing list at
  the optimal position, without resorting disks
* src/libvirt_private.syms: Export virDomainDiskInsert
* src/xend_internal.c, src/xm_internal.c: Remove calls to
  qsort, use virDomainDiskInsert instead.
* src/qemu_driver.c: Remove calls to qsort, use virDoaminDiskInsert
  instead. Fix reordering bugs when hotunplugging disks and
  networks. Fix memory leak in disk/net unplug

by running this command:
git ls-files -z | xargs -0 perl -pi -0777 -e 's/\n\n+$/\n/'
This is in preparation for a more strict make syntax-check
rule that will detect trailing blank lines.

* Makefile.maint (sync-vcs-ignore-files): New target.
Prompted by a patch from James Morris.
http://thread.gmane.org/gmane.comp.emulators.libvirt/8619/focus=8773
Add all (now-generated) .gitignore files.
* .gitignore: New file.
* build-aux/.gitignore: New file.
* docs/.gitignore: New file.
* docs/devhelp/.gitignore: New file.
* docs/examples/.gitignore: New file.
* docs/examples/python/.gitignore: New file.
* gnulib/lib/.gitignore: New file.
* gnulib/lib/arpa/.gitignore: New file.
* gnulib/lib/netinet/.gitignore: New file.
* gnulib/lib/sys/.gitignore: New file.
* gnulib/tests/.gitignore: New file.
* include/.gitignore: New file.
* include/libvirt/.gitignore: New file.
* po/.gitignore: New file.
* proxy/.gitignore: New file.
* python/.gitignore: New file.
* python/tests/.gitignore: New file.
* qemud/.gitignore: New file.
* src/.gitignore: New file.
* tests/.gitignore: New file.
* tests/confdata/.gitignore: New file.
* tests/sexpr2xmldata/.gitignore: New file.
* tests/virshdata/.gitignore: New file.
* tests/xencapsdata/.gitignore: New file.
* tests/xmconfigdata/.gitignore: New file.
* tests/xml2sexprdata/.gitignore: New file.

s.

* tests/qemuxml2argvdata/qemuxml2argv-sound.args
  tests/qemuxml2argvdata/qemuxml2argv-sound.xml
  tests/sexpr2xmldata/sexpr2xml-fv-sound-all.sexpr
  tests/sexpr2xmldata/sexpr2xml-fv-sound-all.xml
  tests/sexpr2xmldata/sexpr2xml-fv-sound.sexpr
  tests/sexpr2xmldata/sexpr2xml-fv-sound.xml
  tests/xmconfigdata/test-fullvirt-sound.cfg
  tests/xmconfigdata/test-fullvirt-sound.xml
  tests/xml2sexprdata/xml2sexpr-fv-sound.sexpr
  tests/xml2sexprdata/xml2sexpr-fv-sound.xml: other regression
  tests from previous commit
Daniel

  if the path environment variable is missing, add the tests for
  <shareable/> from/to w! ode for disk
* tests/sexpr2xmldata/sexpr2xml-disk-block-shareable.sexpr
  tests/sexpr2xmldata/sexpr2xml-disk-block-shareable.xml
  tests/xml2sexprdata/xml2sexpr-disk-block-shareable.sexpr
  tests/xml2sexprdata/xml2sexpr-disk-block-shareable.xml:
  the new tests data
Daniel

  for arguments to bootloader, patch from Hugh Brock
* tests/sexpr2xmltest.c tests/xml2sexprtest.c
  tests/sexpr2xmldata/sexpr2xml-pv-bootloader.sexpr
  tests/sexpr2xmldata/sexpr2xml-pv-bootloader.xml
  tests/xml2sexprdata/xml2sexpr-pv-bootloader.sexpr
  tests/xml2sexprdata/xml2sexpr-pv-bootloader.xml: add specific
  regression tests
Daniel

  to handle CDRom devices with no device name
* tests/sexpr2xmltest.c tests/xml2sexprtest.c
  tests/sexpr2xmldata/sexpr2xml-no-source-cdrom.sexpr
  tests/sexpr2xmldata/sexpr2xml-no-source-cdrom.xml
  tests/xml2sexprdata/xml2sexpr-no-source-cdrom.sexpr
  tests/xml2sexprdata/xml2sexpr-no-source-cdrom.xml: added regression
  tests for this case based on Nobuhiro Itou test inputs.
Daniel