Now that the virHash handling functions call virReportOOMError by
themselves when needed, users of the virHash API no longer need to
do it by themselves. Since users of the virHash API were not
consistently calling virReportOOMError after memory failures from
the virHash code, this has the added benefit of making OOM
reporting from this code more consistent and reliable.

Pure cosmetic change.

* src/openvz/openvz_conf.c (openvzLoadDomains): Replace unsafe
sscanf with safe direct parsing.
(openvzGetVEID): Avoid lost integer overflow detection.
(openvzAssignUUIDs): Likewise, and detect readdir failure.

popen must be matched with pclose (not fclose), or it will leak
resources.  Furthermore, it is a lousy interface when it comes to
signal handling.  We're much better off using our decent command
wrapper.  Note that virCommand guarantees that VIR_FREE(outbuf) is
both required and safe to call, whether virCommandRun succeeded or
failed.

* src/openvz/openvz_conf.c (openvzLoadDomains, openvzGetVEID):
Replace popen with virCommand usage.

Similarly to deprecating close(), I am now deprecating fclose() and
introduce VIR_FORCE_FCLOSE() and VIR_FCLOSE(). Also, fdopen() is replaced with
VIR_FDOPEN().

Most of the files are opened in read-only mode, so usage of
VIR_FORCE_CLOSE() seemed appropriate. Others that are opened in write
mode already had the fclose()<  0 check and I converted those to
VIR_FCLOSE()<  0.

I did not find occurrences of possible double-closed files on the way.

Using automated replacement with sed and editing I have now replaced all
occurrences of close() with VIR_(FORCE_)CLOSE() except for one, of
course. Some replacements were straight forward, others I needed to pay
attention. I hope I payed attention in all the right places... Please
have a look. This should have at least solved one more double-close
error.

Although this patch adds a distinction between maximum vcpus and
current vcpus in the XML, the values should be identical for all
drivers at this point.  Only in subsequent per-driver patches will
a distinction be made.

In general, virDomainGetInfo should prefer the current vcpus.

* src/conf/domain_conf.h (_virDomainDef): Adjust vcpus to unsigned
short, to match virDomainGetInfo limit.  Add maxvcpus member.
* src/conf/domain_conf.c (virDomainDefParseXML)
(virDomainDefFormat): parse and print out vcpu details.
* src/xen/xend_internal.c (xenDaemonParseSxpr)
(xenDaemonFormatSxpr): Manage both vcpu numbers, and require them
to be equal for now.
* src/xen/xm_internal.c (xenXMDomainConfigParse)
(xenXMDomainConfigFormat): Likewise.
* src/phyp/phyp_driver.c (phypDomainDumpXML): Likewise.
* src/openvz/openvz_conf.c (openvzLoadDomains): Likewise.
* src/openvz/openvz_driver.c (openvzDomainDefineXML)
(openvzDomainCreateXML, openvzDomainSetVcpusInternal): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainDumpXML, vboxDomainDefineXML):
Likewise.
* src/xenapi/xenapi_driver.c (xenapiDomainDumpXML): Likewise.
* src/xenapi/xenapi_utils.c (createVMRecordFromXml): Likewise.
* src/esx/esx_vmx.c (esxVMX_ParseConfig, esxVMX_FormatConfig):
Likewise.
* src/qemu/qemu_conf.c (qemuBuildSmpArgStr)
(qemuParseCommandLineSmp, qemuParseCommandLine): Likewise.
* src/qemu/qemu_driver.c (qemudDomainHotplugVcpus): Likewise.
* src/opennebula/one_conf.c (xmlOneTemplate): Likewise.

* src/openvz/openvz_conf.c (openvzLocateConfFile): Alter
signature.
(openvzGetVPSUUID, openvzSetDefinedUUID)
(openvzWriteVPSConfigParam, openvzReadVPSConfigParam)
(openvzCopyDefaultConfig): Adjust callers.

* src/openvz/openvz_conf.c: Whitespace fixes.
* src/openvz/openvz_driver.c: Likewise.

81 patches to gnulib, picks up several new syntax checks.

* .gnulib: Update to latest.
* .x-sc_prohibit_always_true_header_tests: New file.
* bootstrap.conf (gnulib_modules): Add sched.
* src/util/processinfo.c (includes): <sched.h> is now guaranteed.
* src/network/bridge_driver.c (includes): Drop useless
<strings.h>.
* src/openvz/openvz_conf.c (includes): Likewise.
* src/openvz/openvz_driver.c (includes): Likewise.
* src/phyp/phyp_driver.c (includes): Likewise.
* src/qemu/qemu_driver.c (includes): Likewise.
* src/uml/uml_driver.c (includes): Likewise.

When building libvirt on RHEL-5, I saw this error:

cc1: warnings being treated as errors
openvz/openvz_conf.c: In function 'openvzGetVPSUUID':
openvz/openvz_conf.c:835: warning: 'saveptr' may be used uninitialized in this function
make[3]: *** [libvirt_driver_openvz_la-openvz_conf.lo] Error 1

gcc in RHEL-5 gets upset about this usage of strtok_r (even though
it is perfectly valid).  Just set *saveptr to NULL at the
start to quiet it down.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

Also remove unused enum values OPENVZ_WARN and OPENVZ_ERR.

Also free 2k stack space.

virParseVersionString uses virStrToLong_ui instead of sscanf.

This also fixes a bug in the UML driver, that always returned 0
as version number.

Introduce STRSKIP to check if a string has a certain prefix and
to skip this prefix.

* src/openvz/openvz_conf.c (openvzGetVEID): Always call fclose.
Diagnose parse failure also when vzlist output is empty.
If somehow we read a -1, diagnose that (albeit as a parse failure).

Fix multiple veth problem.
NETIF setting was overwritten after first CT because any CT could not be
found by name.
* src/openvz/openvz_conf.c src/openvz/openvz_conf.h: add the
  openvzGetVEID lookup function
* src/openvz/openvz_driver.c: use it in openvzDomainSetNetwork()

* src/openvz/openvz_conf.c (openvzLoadDomains): Diagnose failure of
virUUIDFormat.

* src/openvz/openvz_conf.c (openvzFreeDriver): Also free driver buffer.
Based on a suggestion from Matthias Bolte.

It was used for error reporting only.

* src/openvz/openvz_conf.c (openvzLoadDomains): Avoid NULL deref
of "dom".

Replace free(virBufferContentAndReset()) with virBufferFreeAndReset().
Update documentation and replace all remaining calls to free() with
calls to VIR_FREE(). Also add missing calls to virBufferFreeAndReset()
and virReportOOMError() in OOM error cases.

This implements the virConnectIsSecure, virConnectIsEncrypted,
virDomainIsPersistent, virDomainIsActive, virNetworkIsActive,
virNetworkIsPersistent, virStoragePoolIsActive,
virStoragePoolIsPersistent, virInterfaceIsActive APIs in
(nearly) all drivers. Exceptions are:

 phyp: missing domainIsActive/Persistent
 esx: missing domainIsPersistent
 opennebula: missing domainIsActive/Persistent

* src/remote/remote_protocol.x: Define remote wire ABI for newly
  added APIs.
* daemon/remote_dispatch*.h: Re-generated from remote_protocol.x
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/network/bridge_driver.c,
  src/opennebula/one_driver.c, src/openvz/openvz_conf.c,
  src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
  src/remote/remote_driver.c, src/storage/storage_driver.c,
  src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
  src/xen/xen_driver.c, src/xen/xen_driver.h, src/xen/xen_inotify.c,
  src/xen/xen_inotify.h: Implement all the new APIs where possible

* src/libvirt.c src/lxc/lxc_conf.c src/lxc/lxc_container.c
  src/lxc/lxc_controller.c src/node_device/node_device_hal.c
  src/openvz/openvz_conf.c src/qemu/qemu_driver.c
  src/qemu/qemu_monitor_text.c src/remote/remote_driver.c
  src/storage/storage_backend_disk.c src/storage/storage_driver.c
  src/util/logging.c src/xen/sexpr.c src/xen/xend_internal.c
  src/xen/xm_internal.c: Steve Grubb <sgrubb@redhat.com> sent a code
  review and those are the fixes correcting the problems

Add reference counting on the virDomainObjPtr objects. With the
forthcoming asynchronous QEMU monitor, it will be neccessary to
release the lock on virDomainObjPtr while waiting for a monitor
command response. It is neccessary to ensure one thread can't
delete a virDomainObjPtr while another is waiting. By introducing
reference counting threads can make sure objects they are using
are not accidentally deleted while unlocked.

* src/conf/domain_conf.h, src/conf/domain_conf.c: Add
  virDomainObjRef/Unref APIs, remove virDomainObjFree
* src/openvz/openvz_conf.c: replace call to virDomainObjFree
  with virDomainObjUnref

The current virDomainObjListPtr object stores domain objects in
an array. This means that to find a particular objects requires
O(n) time, and more critically acquiring O(n) mutex locks.

The new impl replaces the array with a virHashTable, keyed off
UUID. Finding a object based on UUID is now O(1) time, and only
requires a single mutex lock. Finding by name/id is unchanged
in complexity.

In changing this, all code which iterates over the array had
to be updated to use a hash table iterator function callback.
Several of the functions which were identically duplicating
across all drivers were pulled into domain_conf.c

* src/conf/domain_conf.h, src/conf/domain_conf.c: Change
  virDomainObjListPtr to use virHashTable. Add a initializer
  method virDomainObjListInit, and rename virDomainObjListFree
  to virDomainObjListDeinit, since its not actually freeing
  the container, only its contents. Also add some convenient
  methods virDomainObjListGetInactiveNames,
  virDomainObjListGetActiveIDs and virDomainObjListNumOfDomains
  which can be used to implement the correspondingly named
  public API entry points in drivers
* src/libvirt_private.syms: Export new methods from domain_conf.h
* src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
  src/openvz/openvz_conf.c, src/openvz/openvz_driver.c,
  src/qemu/qemu_driver.c, src/test/test_driver.c,
  src/uml/uml_driver.c, src/vbox/vbox_tmpl.c: Update all code
  to deal with hash tables instead of arrays for domains

Add the virStrncpy function, which takes a dst string, source string,
the number of bytes to copy and the number of bytes available in the
dest string.  If the source string is too large to fit into the
destination string, including the \0 byte, then no data is copied and
the function returns NULL.  Otherwise, this function copies n bytes
from source into dst, including the \0, and returns a pointer to the
dst string.  This function is intended to replace all unsafe uses
of strncpy in the code base, since strncpy does *not* guarantee that
the buffer terminates with a \0.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

* src/openvz_conf.c, src/openvz_conf.h, src/openvz_driver.c,
  src/openvz_driver.h: Move to src/openvz/
* src/Makefile.am, src/libvirt.c: Adjust for changed paths

* src/openvz_conf.c (openvzReadNetworkConf): Replace open-coded
while loop with equivalent use of strchrnul.
* bootstrap (modules): Add strchrnul.

* src/openvz_conf.c src/qemu_driver.c src/storage_backend_scsi.c
  src/xen_inotify.c: closes various file descriptors leaks

* src/openvz_conf.c (openvz_copyfile): Remove unused assignment.

* src/openvz_conf.c (openvzReadNetworkConf): Initialize "net".
Otherwise, upon openvzRead... failure, we would "goto error;"
where an uninitialized "net" could be dereferenced.

Minor fix to openvzGetVPSUUID to make it take a length parameter.
This ensures that it doesn't make assumptions about the length
of the UUID buffer, and paves the way for removal of strncpy in
the future.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

  raised by Runa Bhattacharjee
daniel

* src/uml_conf.c (VIR_FROM_THIS): Define to VIR_FROM_UML.
* src/xs_internal.c (VIR_FROM_THIS): Define to VIR_FROM_XEN.
* src/xml.c (VIR_FROM_THIS): Define to VIR_FROM_XML.
* src/stats_linux.c (VIR_FROM_THIS): Define to VIR_FROM_STATS_LINUX.
* src/datatypes.c (VIR_FROM_THIS): Define to VIR_FROM_NONE.
* src/lxc_conf.c (VIR_FROM_THIS): Define to VIR_FROM_LXC.
* src/libvirt.c (VIR_FROM_THIS): Define to VIR_FROM_NONE.
* src/node_device_conf.c (VIR_FROM_THIS): Define to VIR_FROM_NODEDEV.
* src/openvz_conf.c (VIR_FROM_THIS): Define to VIR_FROM_OPENVZ.
* src/openvz_driver.c (VIR_FROM_THIS): Define to VIR_FROM_OPENVZ.
* src/conf.c (VIR_FROM_THIS): Define to VIR_FROM_CONF.
Note: this loses config_filename:config_lineno diagnostics,
but that's ok.
* src/node_device.c (VIR_FROM_THIS): Define to VIR_FROM_NODEDEV.
* src/sexpr.c (VIR_FROM_THIS): Define to VIR_FROM_SEXPR.
* po/POTFILES.in: remove src/sexpr.c and src/lxc_conf.c