- 17 7月, 2012 1 次提交
-
-
由 Stefan Berger 提交于
Introduce new members in the virMacAddr 'class' - virMacAddrSet: set virMacAddr from a virMacAddr - virMacAddrSetRaw: setting virMacAddr from raw 6 byte MAC address buffer - virMacAddrGetRaw: writing virMacAddr into raw 6 byte MAC address buffer - virMacAddrCmp: comparing two virMacAddr - virMacAddrCmpRaw: comparing a virMacAddr with a raw 6 byte MAC address buffer then replace raw MAC addresses by replacing - 'unsigned char *' with virMacAddrPtr - 'unsigned char ... [VIR_MAC_BUFLEN]' with virMacAddr and introduce usage of above functions where necessary.
-
- 20 6月, 2012 1 次提交
-
-
由 Peter Krempa 提交于
This patch adds support for listing all domains into drivers that use the common virDomainObj implementation: libxl, lxc, openvz, qemu, test, uml, vmware. For drivers that don't support managed save images the guests are treated as if they had none, so filtering guests that do have such an image on this driver succeeds and produces 0 results.
-
- 19 6月, 2012 1 次提交
-
-
由 Peter Krempa 提交于
This patch stores existence of the image in the object. At start of the daemon the state is checked and then updated in key moments in domain lifecycle.
-
- 22 5月, 2012 2 次提交
-
-
由 Eric Blake 提交于
The previous commit (2cb0899e) left a dead variable behind. * src/libxl/libxl_driver.c (libxlClose): Drop dead variable.
-
由 Daniel P. Berrange 提交于
When the last reference to a virConnectPtr is released by libvirtd, it was possible for a deadlock to occur in the virDomainEventState functions. The virDomainEventStatePtr holds a reference on virConnectPtr for each registered callback. When removing a callback, the virUnrefConnect function is run. If this causes the last reference on the virConnectPtr to be released, then virReleaseConnect can be run, which in turns calls qemudClose. This function has a call to virDomainEventStateDeregisterConn which is intended to remove all callbacks associated with the virConnectPtr instance. This will try to grab a lock on virDomainEventState but this lock is already held. Deadlock ensues Thread 1 (Thread 0x7fcbb526a840 (LWP 23185)): Since each callback associated with a virConnectPtr holds a reference on virConnectPtr, it is impossible for the qemudClose method to be invoked while any callbacks are still registered. Thus the call to virDomainEventStateDeregisterConn must in fact be a no-op. Thus it is possible to just remove all trace of virDomainEventStateDeregisterConn and avoid the deadlock. * src/conf/domain_event.c, src/conf/domain_event.h, src/libvirt_private.syms: Delete virDomainEventStateDeregisterConn * src/libxl/libxl_driver.c, src/lxc/lxc_driver.c, src/qemu/qemu_driver.c, src/uml/uml_driver.c: Remove calls to virDomainEventStateDeregisterConn
-
- 30 3月, 2012 1 次提交
-
-
由 Daniel P. Berrange 提交于
The code is splattered with a mix of sizeof foo sizeof (foo) sizeof(foo) Standardize on sizeof(foo) and add a syntax check rule to enforce it Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 27 3月, 2012 1 次提交
-
-
由 Laine Stump 提交于
libvirt always adds -Werror-frame-larger-than=4096 to the flags when it builds. When building on Fedora 17, two functions with multiple 1024 buffers declared inside if {} blocks would generate frame size errors; apparently the version of gcc on Fedora 16 will merge these multiple buffers into a single buffer even when optimization is off, but Fedora 17 won't. The fix is to declare a single 1024 buffer at the top of the two offending functions, and reuse the single buffer throughout the functions.
-
- 23 3月, 2012 1 次提交
-
-
由 Daniel P. Berrange 提交于
Move error reporting out of the callers, into virURIParse and virURIFormat, to get consistency. * include/libvirt/virterror.h, src/util/virterror.c: Add VIR_FROM_URI * src/util/viruri.c, src/util/viruri.h: Add error reporting * src/esx/esx_driver.c, src/libvirt.c, src/libxl/libxl_driver.c, src/lxc/lxc_driver.c, src/openvz/openvz_driver.c, src/qemu/qemu_driver.c, src/qemu/qemu_migration.c, src/remote/remote_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c, src/vmx/vmx.c, src/xen/xen_driver.c, src/xen/xend_internal.c, tests/viruritest.c: Remove error reporting Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 09 3月, 2012 1 次提交
-
-
由 Laine Stump 提交于
There are several functions in domain_conf.c that remove a device object from the domain's list of that object type, but don't free the object or return it to the caller to free. In many cases this isn't a problem because the caller already had a pointer to the object and frees it afterward, but in several cases the removed object was just left floating around with no references to it. In particular, the function qemuDomainDetachDeviceConfig() calls functions to locate and remove net (virDomainNetRemoveByMac), disk (virDomainDiskRemoveByName()), and lease (virDomainLeaseRemove()) devices, but neither it nor its caller qemuDomainModifyDeviceConfig() ever obtain a pointer to the device being removed, much less free it. This patch modifies the following "remove" functions to return a pointer to the device object being removed from the domain device arrays, to give the caller the option of freeing the device object using that pointer if needed. In places where the object was previously leaked, it is now freed: virDomainDiskRemove virDomainDiskRemoveByName virDomainNetRemove virDomainNetRemoveByMac virDomainHostdevRemove virDomainLeaseRemove virDomainLeaseRemoveAt The functions that had been leaking: libxlDomainDetachConfig - leaked a virDomainDiskDef qemuDomainDetachDeviceConfig - could leak a virDomainDiskDef, a virDomainNetDef, or a virDomainLeaseDef qemuDomainDetachLease - leaked a virDomainLeaseDef
-
- 08 3月, 2012 1 次提交
-
-
由 Eric Blake 提交于
On 64-bit platforms, unsigned long and unsigned long long are identical, so we don't have to worry about overflow checks. On 32-bit platforms, anywhere we narrow unsigned long long back to unsigned long, we have to worry about overflow; it's easier to do this in one place by having most of the code use the same or wider types, and only doing the narrowing at the last minute. Therefore, the memory set commands remain unsigned long, and the memory get command now centralizes the overflow check into libvirt.c, so that drivers don't have to repeat the work. This also fixes a bug where xen returned the wrong value on failure (most APIs return -1 on failure, but getMaxMemory must return 0 on failure). * src/driver.h (virDrvDomainGetMaxMemory): Use long long. * src/libvirt.c (virDomainGetMaxMemory): Raise overflow. * src/test/test_driver.c (testGetMaxMemory): Fix driver. * src/rpc/gendispatch.pl (name_to_ProcName): Likewise. * src/xen/xen_hypervisor.c (xenHypervisorGetMaxMemory): Likewise. * src/xen/xen_driver.c (xenUnifiedDomainGetMaxMemory): Likewise. * src/xen/xend_internal.c (xenDaemonDomainGetMaxMemory): Likewise. * src/xen/xend_internal.h (xenDaemonDomainGetMaxMemory): Likewise. * src/xen/xm_internal.c (xenXMDomainGetMaxMemory): Likewise. * src/xen/xm_internal.h (xenXMDomainGetMaxMemory): Likewise. * src/xen/xs_internal.c (xenStoreDomainGetMaxMemory): Likewise. * src/xen/xs_internal.h (xenStoreDomainGetMaxMemory): Likewise. * src/xenapi/xenapi_driver.c (xenapiDomainGetMaxMemory): Likewise. * src/esx/esx_driver.c (esxDomainGetMaxMemory): Likewise. * src/libxl/libxl_driver.c (libxlDomainGetMaxMemory): Likewise. * src/qemu/qemu_driver.c (qemudDomainGetMaxMemory): Likewise. * src/lxc/lxc_driver.c (lxcDomainGetMaxMemory): Likewise. * src/uml/uml_driver.c (umlDomainGetMaxMemory): Likewise.
-
- 28 2月, 2012 1 次提交
-
-
由 Laine Stump 提交于
This call to virDomainDeviceDefParse is both unnecessary (since it will again be called at the top of the immediately following if(), and if not there, then at the top of the if following that), but it also creates a leak of one virDomainDeviceDef and one [whatever type of device the DeviceDef is pointing to; probably a virDomainDiskDef] in the case that the function has been called with VIR_DOMAIN_DEVICE_MODIFY_CONFIG (the second parse will overwrite the devicedef that was just created).
-
- 25 2月, 2012 1 次提交
-
-
由 Martin Kletzander 提交于
Function xmlParseURI does not remove square brackets around IPv6 address when parsing. One of the solutions is making wrappers around functions working with xmlURI*. This assures that uri->server will be always properly assigned and it doesn't have to be changed when used on some new place in the code. For this purpose, functions virParseURI and virSaveURI were added. These function are wrappers around xmlParseURI and xmlSaveUri respectively. Also there is one new syntax check function to prohibit these functions anywhere else. File changes: - src/util/viruri.h -- declaration - src/util/viruri.c -- definition - src/libvirt_private.syms -- symbol export - src/Makefile.am -- added source and header files - cfg.mk -- added sc_prohibit_xmlURI - all others -- ID name and include fixes
-
- 04 2月, 2012 2 次提交
-
-
由 Laine Stump 提交于
virFileOpenAs previously would only try opening a file as the current user, or as a different user, but wouldn't try both methods in a single call. This made it cumbersome to use as a replacement for open(2). Additionally, it had a lot of historical baggage that led to it being difficult to understand. This patch refactors virFileOpenAs in the following ways: * reorganize the code so that everything dealing with both the parent and child sides of the "fork+setuid+setgid+open" method are in a separate function. This makes the public function easier to understand. * Allow a single call to virFileOpenAs() to first attempt the open as the current user, and if that fails to automatically re-try after doing fork+setuid (if deemed appropriate, i.e. errno indicates it would now be successful, and the file is on a networkFS). This makes it possible (in many, but possibly not all, cases) to drop-in virFileOpenAs() as a replacement for open(2). (NB: currently qemuOpenFile() calls virFileOpenAs() twice, once without forking, then again with forking. That unfortunately can't be changed without at least some discussion of the ramifications, because the requested file permissions are different in each case, which is something that a single call to virFileOpenAs() can't deal with.) * Add a flag so that any fchown() of the file to a different uid:gid is explicitly requested when the function is called, rather than it being implied by the presence of the O_CREAT flag. This just makes for less subtle surprises to consumers. (Commit b1643dc1 added the check for O_CREAT before forcing ownership. This patch just makes that restriction more explicit.) * If either the uid or gid is specified as "-1", virFileOpenAs will interpret this to mean "the current [gu]id". All current consumers of virFileOpenAs should retain their present behavior (after a few minor changes to their setup code and arguments).
-
由 Eric Blake 提交于
Our HACKING discourages use of malloc and free, for at least a couple of years now. But we weren't enforcing it, until now :) For now, I've exempted python and tests, and will clean those up in subsequent patches. Examples should be permanently exempt, since anyone copying our examples won't have use of our internal-only memory.h via libvirt_util.la. * cfg.mk (sc_prohibit_raw_allocation): New rule. (exclude_file_name_regexp--sc_prohibit_raw_allocation): and exemptions. * src/cpu/cpu.c (cpuDataFree): Avoid false positive. * src/conf/network_conf.c (virNetworkDNSSrvDefParseXML): Fix offenders. * src/libxl/libxl_conf.c (libxlMakeDomBuildInfo, libxlMakeVfb) (libxlMakeDeviceModelInfo): Likewise. * src/rpc/virnetmessage.c (virNetMessageSaveError): Likewise. * tools/virsh.c (_vshMalloc, _vshCalloc): Likewise.
-
- 24 1月, 2012 1 次提交
-
-
由 Daniel P. Berrange 提交于
Add a new API virDomainShutdownFlags and define: VIR_DOMAIN_SHUTDOWN_DEFAULT = 0, VIR_DOMAIN_SHUTDOWN_ACPI_POWER_BTN = (1 << 0), VIR_DOMAIN_SHUTDOWN_GUEST_AGENT = (1 << 1), Also define some flags for the reboot API VIR_DOMAIN_REBOOT_DEFAULT = 0, VIR_DOMAIN_REBOOT_ACPI_POWER_BTN = (1 << 0), VIR_DOMAIN_REBOOT_GUEST_AGENT = (1 << 1), Although these two APIs currently have the same flags, using separate enums allows them to expand separately in the future. Add stub impls of the new API for all existing drivers
-
- 20 1月, 2012 1 次提交
-
-
由 Eric Blake 提交于
Reusing common code makes things smaller; it also buys us some additional safety, such as now rejecting duplicate parameters during a set operation. * src/qemu/qemu_driver.c (qemuDomainSetBlkioParameters) (qemuDomainSetMemoryParameters, qemuDomainSetNumaParameters) (qemuSetSchedulerParametersFlags) (qemuDomainSetInterfaceParameters, qemuDomainSetBlockIoTune) (qemuDomainGetBlkioParameters, qemuDomainGetMemoryParameters) (qemuDomainGetNumaParameters, qemuGetSchedulerParametersFlags) (qemuDomainBlockStatsFlags, qemuDomainGetInterfaceParameters) (qemuDomainGetBlockIoTune): Use new helpers. * src/esx/esx_driver.c (esxDomainSetSchedulerParametersFlags) (esxDomainSetMemoryParameters) (esxDomainGetSchedulerParametersFlags) (esxDomainGetMemoryParameters): Likewise. * src/libxl/libxl_driver.c (libxlDomainSetSchedulerParametersFlags) (libxlDomainGetSchedulerParametersFlags): Likewise. * src/lxc/lxc_driver.c (lxcDomainSetMemoryParameters) (lxcSetSchedulerParametersFlags, lxcDomainSetBlkioParameters) (lxcDomainGetMemoryParameters, lxcGetSchedulerParametersFlags) (lxcDomainGetBlkioParameters): Likewise. * src/test/test_driver.c (testDomainSetSchedulerParamsFlags) (testDomainGetSchedulerParamsFlags): Likewise. * src/xen/xen_hypervisor.c (xenHypervisorSetSchedulerParameters) (xenHypervisorGetSchedulerParameters): Likewise.
-
- 08 1月, 2012 1 次提交
-
-
由 Laine Stump 提交于
This fixes https://bugzilla.redhat.com/show_bug.cgi?id=638633 Although scripts are not used by interfaces of type other than "ethernet" in qemu, due to the fact that the parser stores the script name in a union that is only valid when type is ethernet or bridge, there is no way for anyone except the parser itself to catch the problem of specifying an interface script for an inappropriate interface type (by the time the parsed data gets back to the code that called the parser, all evidence that a script was specified is forgotten). Since the parser itself should be agnostic to which type of interface allows scripts (an example of why: a script specified for an interface of type bridge is valid for xen domains, but not for qemu domains), the solution here is to move the script out of the union(s) in the DomainNetDef, always populate it when specified (regardless of interface type), and let the driver decide whether or not it is appropriate. Currently the qemu, xen, libxml, and uml drivers recognize the script parameter and do something with it (the uml driver only to report that it isn't supported). Those drivers have been updated to log a CONFIG_UNSUPPORTED error when a script is specified for an interface type that's inappropriate for that particular hypervisor. (NB: There was earlier discussion of solving this problem by adding a VALIDATE flag to all libvirt APIs that accept XML, which would cause the XML to be validated against the RNG files. One statement during that discussion was that the RNG shouldn't contain hypervisor-specific things, though, and a proper solution to this problem would require that (again, because a script for an interface of type "bridge" is accepted by xen, but not by qemu).
-
- 19 12月, 2011 4 次提交
-
-
由 Daniel P. Berrange 提交于
The lifetime of the virDomainEventState object is tied to the lifetime of the driver, which in stateless drivers is tied to the lifetime of the virConnectPtr. If we add & remove a timer when allocating/freeing the virDomainEventState object, we can get a situation where the timer still triggers once after virDomainEventState has been freed. The timeout callback can't keep a ref on the event state though, since that would be a circular reference. The trick is to only register the timer when a callback is registered with the event state & remove the timer when the callback is unregistered. The demo for the bug is to run while true ; do date ; ../tools/virsh -q -c test:///default 'shutdown test; undefine test; dominfo test' ; done prior to this fix, it will frequently hang and / or crash, or corrupt memory
-
由 Daniel P. Berrange 提交于
Currently all drivers using domain events need to provide a callback for handling a timer to dispatch events in a clean stack. There is no technical reason for dispatch to go via driver specific code. It could trivially be dispatched directly from the domain event code, thus removing tedious boilerplate code from all drivers Also fix the libxl & xen drivers to pass 'true' when creating the virDomainEventState, since they run inside the daemon & thus always expect events to be present. * src/conf/domain_event.c, src/conf/domain_event.h: Internalize dispatch of events from timer callback * src/libxl/libxl_driver.c, src/lxc/lxc_driver.c, src/qemu/qemu_domain.c, src/qemu/qemu_driver.c, src/remote/remote_driver.c, src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c, src/xen/xen_driver.c: Remove all timer dispatch functions
-
由 Daniel P. Berrange 提交于
* src/libxl/libxl_driver.c, src/lxc/lxc_driver.c, src/qemu/qemu_driver.c, src/remote/remote_driver.c, src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c, src/xen/xen_driver.c: Convert to threadsafe APIs
-
由 Daniel P. Berrange 提交于
When registering a callback for a particular event some callers need to know how many callbacks already exist for that event. While it is possible to ask for a count, this is not free from race conditions when threaded. Thus the API for registering callbacks should return the count of callbacks. Also rename virDomainEventStateDeregisterAny to virDomainEventStateDeregisterID * src/conf/domain_event.c, src/conf/domain_event.h, src/libvirt_private.syms: Return count of callbacks when registering callbacks * src/libxl/libxl_driver.c, src/libxl/libxl_driver.c, src/qemu/qemu_driver.c, src/remote/remote_driver.c, src/remote/remote_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c, src/xen/xen_driver.c: Update for change in APIs
-
- 24 11月, 2011 2 次提交
-
-
由 Jiri Denemark 提交于
-
由 Jiri Denemark 提交于
-
- 03 11月, 2011 3 次提交
-
-
由 Daniel P. Berrange 提交于
The default console type may vary based on the OS type. ie a Xen paravirt guests wants a 'xen' console, while a fullvirt guests wants a 'serial' console. A plain integer default console type in the capabilities does not suffice. Instead introduce a callback that is passed the OS type. * src/conf/capabilities.h: Use a callback for default console type * src/conf/domain_conf.c, src/conf/domain_conf.h: Use callback for default console type. Add missing LXC/OpenVZ console types. * src/esx/esx_driver.c, src/libxl/libxl_conf.c, src/lxc/lxc_conf.c, src/openvz/openvz_conf.c, src/phyp/phyp_driver.c, src/qemu/qemu_capabilities.c, src/uml/uml_conf.c, src/vbox/vbox_tmpl.c, src/vmware/vmware_conf.c, src/xen/xen_hypervisor.c, src/xenapi/xenapi_driver.c: Set default console type callback
-
由 Eric Blake 提交于
Allow the user to call with nparams too small, per API documentation. * src/libxl/libxl_driver.c (libxlDomainGetSchedulerParametersFlags): Allow fewer than max.
-
由 Eric Blake 提交于
Document the parameter names that will be used by virDomain{Get,Set}SchedulerParameters{,Flags}, rather than hard-coding those names in each driver, to match what is done with memory, blkio, and blockstats parameters. * include/libvirt/libvirt.h.in (VIR_DOMAIN_SCHEDULER_CPU_SHARES) (VIR_DOMAIN_SCHEDULER_VCPU_PERIOD) (VIR_DOMAIN_SCHEDULER_VCPU_QUOTA, VIR_DOMAIN_SCHEDULER_WEIGHT) (VIR_DOMAIN_SCHEDULER_CAP, VIR_DOMAIN_SCHEDULER_RESERVATION) (VIR_DOMAIN_SCHEDULER_LIMIT, VIR_DOMAIN_SCHEDULER_SHARES): New field name macros. * src/qemu/qemu_driver.c (qemuSetSchedulerParametersFlags) (qemuGetSchedulerParametersFlags): Use new defines. * src/test/test_driver.c (testDomainGetSchedulerParamsFlags) (testDomainSetSchedulerParamsFlags): Likewise. * src/xen/xen_hypervisor.c (xenHypervisorGetSchedulerParameters) (xenHypervisorSetSchedulerParameters): Likewise. * src/xen/xend_internal.c (xenDaemonGetSchedulerParameters) (xenDaemonSetSchedulerParameters): Likewise. * src/lxc/lxc_driver.c (lxcSetSchedulerParametersFlags) (lxcGetSchedulerParametersFlags): Likewise. * src/esx/esx_driver.c (esxDomainGetSchedulerParametersFlags) (esxDomainSetSchedulerParametersFlags): Likewise. * src/libxl/libxl_driver.c (libxlDomainGetSchedulerParametersFlags) (libxlDomainSetSchedulerParametersFlags): Likewise.
-
- 08 9月, 2011 1 次提交
-
-
由 Alex Jia 提交于
Variable 'l_disk' initialized to a null pointer value, control jumps to 'case VIR_DOMAIN_DISK_DEVICE_DISK and then taking false branch, Within the expansion of the macro 'libxlError': Field access results in a dereference of a null pointer (loaded from variable 'l_disk'). * src/libxl/libxl_driver.c: Field access results in a dereference of a null pointer (loaded from variable 'l_disk') Signed-off-by: NAlex Jia <ajia@redhat.com>
-
- 05 9月, 2011 2 次提交
-
-
由 Eric Blake 提交于
I got confused when 'virsh domblkinfo dom disk' required the path to a disk (which can be ambiguous, since a single file can back multiple disks), rather than the unambiguous target device name that I was using in disk snapshots. So, in true developer fashion, I went for the best of both worlds - all interfaces that operate on a disk (aka block) now accept either the target name or the unambiguous path to the backing file used by the disk. * src/conf/domain_conf.h (virDomainDiskIndexByName): Add parameter. (virDomainDiskPathByName): New prototype. * src/libvirt_private.syms (domain_conf.h): Export it. * src/conf/domain_conf.c (virDomainDiskIndexByName): Also allow searching by path, and decide whether ambiguity is okay. (virDomainDiskPathByName): New function. (virDomainDiskRemoveByName, virDomainSnapshotAlignDisks): Update callers. * src/qemu/qemu_driver.c (qemudDomainBlockPeek) (qemuDomainAttachDeviceConfig, qemuDomainUpdateDeviceConfig) (qemuDomainGetBlockInfo, qemuDiskPathToAlias): Likewise. * src/qemu/qemu_process.c (qemuProcessFindDomainDiskByPath): Likewise. * src/libxl/libxl_driver.c (libxlDomainAttachDeviceDiskLive) (libxlDomainDetachDeviceDiskLive, libxlDomainAttachDeviceConfig) (libxlDomainUpdateDeviceConfig): Likewise. * src/uml/uml_driver.c (umlDomainBlockPeek): Likewise. * src/xen/xend_internal.c (xenDaemonDomainBlockPeek): Likewise. * docs/formatsnapshot.html.in: Update documentation. * tools/virsh.pod (domblkstat, domblkinfo): Likewise. * docs/schemas/domaincommon.rng (diskTarget): Tighten pattern on disk targets. * docs/schemas/domainsnapshot.rng (disksnapshot): Update to match. * tests/domainsnapshotxml2xmlin/disk_snapshot.xml: Update test.
-
由 Eric Blake 提交于
The previous patch introduced new config, but if a hypervisor does not support that new config, someone can write XML that does not behave as documented. This prevents some of those cases by explicitly rejecting transient disks for several hypervisors. Disk snapshots will require a new flag to actually affect a snapshot creation, so there's not much to reject there. * src/qemu/qemu_command.c (qemuBuildDriveStr): Reject transient disks for now. * src/libxl/libxl_conf.c (libxlMakeDisk): Likewise. * src/xenxs/xen_sxpr.c (xenFormatSxprDisk): Likewise. * src/xenxs/xen_xm.c (xenFormatXMDisk): Likewise.
-
- 01 9月, 2011 1 次提交
-
-
由 Daniel P. Berrange 提交于
If the libxl driver is compiled in, then everytime libvirtd starts up on a non-Xen Dom0 host, it logs a error message. Since this is an expected condition, we should not log at 'error' level, only 'info'. * src/libxl/libxl_driver.c: Lower log level for certain expected errors during driver init
-
- 19 8月, 2011 1 次提交
-
-
由 Osier Yang 提交于
Undefining a running domain will convert it to trasient, but keep the domain still running.
-
- 11 8月, 2011 1 次提交
-
-
由 Eric Blake 提交于
Transient domains reject attempts to set autostart, and using virDomainCreate to restart a domain only works on persistent domains. Therefore, managed save makes no sense on transient domains, and should be rejected up front rather than creating an otherwise unrecoverable managed save file. Besides, transient domains imply that a lot more management is being done by the upper layer; this includes the assumption that the upper layer is okay managing the saved state file created by virDomainSave, and does not need to use managed save. * src/libvirt.c: Document that transient domains are incompatible with managed save. * src/qemu/qemu_driver.c (qemuDomainManagedSave): Enforce it. * src/libxl/libxl_driver.c (libxlDomainManagedSave): Likewise.
-
- 29 7月, 2011 1 次提交
-
-
由 Laine Stump 提交于
This failure was introduced by commit dacee3d, which removed listenAddr from the unions in virDomainGraphicsDef in favor of putting it in the address attribute of virDomainGraphicsListenDef.
-
- 26 7月, 2011 1 次提交
-
-
由 Eric Blake 提交于
Now that virDomainSetVcpusFlags knows about VIR_DOMAIN_AFFECT_CURRENT, so should virDomainGetVcpusFlags. Unfortunately, the virsh counterpart 'virsh vcpucount' has already commandeered --current for a different meaning, so teaching virsh to expose this in the next patch will require a bit of care. * src/libvirt.c (virDomainGetVcpusFlags): Allow VIR_DOMAIN_AFFECT_CURRENT. * src/libxl/libxl_driver.c (libxlDomainGetVcpusFlags): Likewise. * src/qemu/qemu_driver.c (qemudDomainGetVcpusFlags): Likewise. * src/test/test_driver.c (testDomainGetVcpusFlags): Likewise. * src/xen/xen_driver.c (xenUnifiedDomainGetVcpusFlags): Likewise.
-
- 22 7月, 2011 3 次提交
-
-
由 Eric Blake 提交于
For all hypervisors that support save and restore, the new API now performs the same functions as the old. VBox is excluded from this list, because its existing domainsave is broken (there is no corresponding domainrestore, and there is no control over the filename used in the save). A later patch should change vbox to use its implementation for managedsave, and teach start to use managedsave results. * src/libxl/libxl_driver.c (libxlDomainSave): Move guts... (libxlDomainSaveFlags): ...to new function. (libxlDomainRestore): Move guts... (libxlDomainRestoreFlags): ...to new function. * src/test/test_driver.c (testDomainSave, testDomainSaveFlags) (testDomainRestore, testDomainRestoreFlags): Likewise. * src/xen/xen_driver.c (xenUnifiedDomainSave) (xenUnifiedDomainSaveFlags, xenUnifiedDomainRestore) (xenUnifiedDomainRestoreFlags): Likewise. * src/qemu/qemu_driver.c (qemudDomainSave, qemudDomainRestore): Rename and move guts. (qemuDomainSave, qemuDomainSaveFlags, qemuDomainRestore) (qemuDomainRestoreFlags): ...here. (qemudDomainSaveFlag): Rename... (qemuDomainSaveInternal): ...to this, and update callers.
-
由 Michal Privoznik 提交于
-
由 Eric Blake 提交于
In preparation for a future patch adding new virFile APIs. * src/util/files.h, src/util/files.c: Move... * src/util/virfile.h, src/util/virfile.c: ...here, and rename functions to virFile prefix. Macro names are intentionally left alone. * *.c: All '#include "files.h"' uses changed. * src/Makefile.am (UTIL_SOURCES): Reflect rename. * cfg.mk (exclude_file_name_regexp--sc_prohibit_close): Likewise. * src/libvirt_private.syms: Likewise. * docs/hacking.html.in: Likewise. * HACKING: Regenerate.
-
- 20 7月, 2011 2 次提交
-
-
由 Eric Blake 提交于
* src/libxl/libxl_driver.c (libxlDomainUndefineFlags): Use correct enum value. * src/remote_protocol-structs (remote_procedure): Likewise.
-
由 Osier Yang 提交于
* src/libxl/libxl_driver.c: New callback for libxl_driver, new function libxlDomainUndefineFlags, and changes libxlDomainUndefine as a wrapper of libxlDomainUndefineFlags.
-
- 16 7月, 2011 1 次提交
-
-
由 Eric Blake 提交于
The previous patches only cleaned up ATTRIBUTE_UNUSED flags cases; auditing the drivers found other places where flags was being used but not validated. In particular, domainGetXMLDesc had issues with clients accepting a different set of flags than the common virDomainDefFormat helper function. * src/conf/domain_conf.c (virDomainDefFormat): Add common flag check. * src/uml/uml_driver.c (umlDomainAttachDeviceFlags) (umlDomainDetachDeviceFlags): Reject unknown flags. * src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc) (vboxDomainAttachDeviceFlags) (vboxDomainDetachDeviceFlags): Likewise. * src/qemu/qemu_driver.c (qemudDomainMemoryPeek): Likewise. (qemuDomainGetXMLDesc): Document common flag handling. * src/libxl/libxl_driver.c (libxlDomainGetXMLDesc): Likewise. * src/lxc/lxc_driver.c (lxcDomainGetXMLDesc): Likewise. * src/openvz/openvz_driver.c (openvzDomainGetXMLDesc): Likewise. * src/phyp/phyp_driver.c (phypDomainGetXMLDesc): Likewise. * src/test/test_driver.c (testDomainGetXMLDesc): Likewise. * src/vmware/vmware_driver.c (vmwareDomainGetXMLDesc): Likewise. * src/xenapi/xenapi_driver.c (xenapiDomainGetXMLDesc): Likewise.
-