- 18 9月, 2019 13 次提交
-
-
由 Michal Privoznik 提交于
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
The qemu side is not merged in yet, so there is a chance that the interface will change. Don't detect the capability just yet then. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Shi Lei 提交于
Replace 'sc_prohibit_semicolon_at_eol_in_python' with generic 'sc_flake8' rule to check python code style. Now 'sc_flake8' just check the error E703: 'statement ends with a semicolon'. In future, we could use '--select' to introduce more rules. Signed-off-by: NShi Lei <shi_lei@massclouds.com> Reviewed-by: NJán Tomko <jtomko@redhat.com> Signed-off-by: NJán Tomko <jtomko@redhat.com>
-
由 Ján Tomko 提交于
Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NCole Robinson <crobinso@redhat.com>
-
由 Ján Tomko 提交于
Do not overwrite the 'ret' value more than once. Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NCole Robinson <crobinso@redhat.com>
-
由 Ján Tomko 提交于
Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NCole Robinson <crobinso@redhat.com>
-
由 Ján Tomko 提交于
Copy the declaration into the smallest blocks it's used in and mark it as VIR_AUTOFREE. Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NCole Robinson <crobinso@redhat.com>
-
由 Ján Tomko 提交于
Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NCole Robinson <crobinso@redhat.com>
-
由 Ján Tomko 提交于
Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NCole Robinson <crobinso@redhat.com>
-
由 Ján Tomko 提交于
As of commit 2d80fbb1 this variable is unused. Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NCole Robinson <crobinso@redhat.com>
-
由 Nikolay Shirokovskiy 提交于
Missing piece for [1] [1]: 577a1f98: qemu: Pass correct qemuCaps to virDomainDefParseNode Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
-
由 Nikolay Shirokovskiy 提交于
Missing piece for [1]. [1] b449c270: qemu: Pass correct qemuCaps to virDomainDeviceDefPostParse Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
-
由 Nikolay Shirokovskiy 提交于
After [1] we got failure on attempt to copy empty string. Before the patch empty string was copied successfuly. Restore the original behaviour. [1] 7d70a63b util: Improve virStrncpy() implementation Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com> Reviewed-by: NMartin Kletzander <mkletzan@redhat.com>
-
- 17 9月, 2019 2 次提交
-
-
由 Michael Chapman 提交于
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com> Signed-off-by: NMichael Chapman <mike@very.puzzling.org>
-
由 Michael Chapman 提交于
The ports in the socket address structures returned by getaddrinfo() are in network byte order. Convert to host byte order before returning them. Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com> Signed-off-by: NMichael Chapman <mike@very.puzzling.org>
-
- 16 9月, 2019 14 次提交
-
-
由 Daniel P. Berrangé 提交于
When opening a connection to a second driver inside the daemon, we must ensure the identity of the current user is passed across. This allows the second daemon to perform access control checks against the real end users, instead of against the libvirt daemon that's proxying across the API calls. Reviewed-by: NMichal Privoznik <mprivozn@redhat.com> Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>
-
由 Daniel P. Berrangé 提交于
Add ability to import/export all the parameters associated with an identity, so that they can be exposed via the public API. Reviewed-by: NMichal Privoznik <mprivozn@redhat.com> Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>
-
由 Daniel P. Berrangé 提交于
We'll shortly be exposing the identity as virTypedParameter in the public header, so it simplifies life to use that as the internal representation too. Reviewed-by: NMichal Privoznik <mprivozn@redhat.com> Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>
-
由 Daniel P. Berrangé 提交于
The virIdentity getters are unusual in that they return -1 to indicate "not found" and don't report any error. Change them to return -1 for real errors, 0 for not found, and 1 for success. Reviewed-by: NMichal Privoznik <mprivozn@redhat.com> Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>
-
由 Daniel P. Berrangé 提交于
It is simpler to remove this unused method than to rewrite it using typed parameters in the next patch. Reviewed-by: NMichal Privoznik <mprivozn@redhat.com> Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>
-
由 Daniel P. Berrangé 提交于
Only expose the type safe getters/setters to other code in preparation for changing the internal storage of data. Reviewed-by: NMichal Privoznik <mprivozn@redhat.com> Reviewed-by: NAndrea Bolognani <abologna@redhat.com> Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>
-
由 Daniel P. Berrangé 提交于
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com> Reviewed-by: NAndrea Bolognani <abologna@redhat.com> Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>
-
由 Daniel P. Berrangé 提交于
Remove the "UNIX" tag from the names for user name, group name, process ID and process time, since these attributes are all usable for non-UNIX platforms like Windows. User ID and group ID are left with a "UNIX" tag, since there's no equivalent on Windows. The closest equivalent concept on Windows, SID, is a struct containing a number of integer fields, which is commonly represented in string format instead. This would require a separate attribute, and is left for a future exercise, since the daemons are not currently built on Windows anyway. Reviewed-by: NMichal Privoznik <mprivozn@redhat.com> Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>
-
由 Daniel P. Berrangé 提交于
When using the fine grained access control mechanism for APIs, when a client connects to libvirtd, the latter will fetch the uid, gid, selinux info of the remote client on the UNIX domain socket. This is then used as the identity when checking ACLs. With the new split daemons things are a bit more complicated. The user can connect to virtproxyd, which in turn connects to virtqemud. When virtqemud requests the identity over the UNIX domain socket, it will get the identity that virtproxyd is running as, not the identity of the real end user/application. virproxyd knows what the real identity is, and needs to be able to forward this information to virtqemud. The virConnectSetIdentity API provides a mechanism for doing this. Obviously virtqemud should not accept such identity overrides from any client, it must only honour it from a trusted client, aka one running as the same uid/gid as itself. The typed parameters exposed in the API are the same as those currently supported by the internal virIdentity class, with a few small name changes. Reviewed-by: NMichal Privoznik <mprivozn@redhat.com> Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>
-
由 Peter Krempa 提交于
Most code paths prevent starting a blockjob if we already have one but the job registering function does not do this check. While this isn't a problem for regular cases we had a bad test case where we registered two jobs for a single disk which leaked one of the jobs. Prevent this in the registering function until we allow having multiple jobs per disk. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> ACKed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Peter Krempa 提交于
There were accidentally two disks with 'vdc' target with corresponding blockjobs which made libvirt leak some references as there are not supposed to be two blockjobs for a single disk. Fix this mess by renaming some of the disks. In addition the block job names also didn't correspond to the naming convetion which also includes the disk target. Fix it as well. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> ACKed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Laine Stump 提交于
qemuDomainAttachNetDevice() (hotplug) previously had some of the validation that is in qemuDomainValidateActualNetDef(), but it was incomplete. qemuDomainChangeNet() had none of that validation, but it is all appropriate in both cases. This is the final piece of a previously partial resolution to https://bugzilla.redhat.com/1502754Signed-off-by: NLaine Stump <laine@redhat.com> Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Laine Stump 提交于
The same validation should be done for both static network devices and hotplugged devices, but they are currently inconsistent. Move all the relevant validation from qemuBuildInterfaceCommandLine() into the new function qemuDomainValidateActualNetDef() and call the latter from the former. Signed-off-by: NLaine Stump <laine@redhat.com> Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Laine Stump 提交于
It needs to be used by a function that only has a const pointer to virDomainNetDef. Signed-off-by: NLaine Stump <laine@redhat.com> Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 14 9月, 2019 4 次提交
-
-
由 Jim Fehlig 提交于
AppArmorGetSecurityProcessLabel copies the VM's profile name to the label member of virSecurityLabel struct. If the profile is not loaded, the name is set empty before calling virStrcpy to copy it. However, virStrcpy will fail if src is empty (0 length), causing AppArmorGetSecurityProcessLabel to needlessly fail. Simple operations that report security driver information will subsequently fail virsh dominfo test Id: 248 Name: test ... Security model: apparmor Security DOI: 0 error: internal error: error copying profile name Avoid copying an empty profile name when the profile is not loaded. Signed-off-by: NJim Fehlig <jfehlig@suse.com> Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Daniel P. Berrangé 提交于
To aid in troubleshooting add some debug messages wrt bandwidth settings and networks. Reviewed-by: NLaine Stump <laine@laine.org> Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>
-
由 Daniel P. Berrangé 提交于
We previously allowed bandwidth settings when attaching NICs to networks with forward mode=bridge: commit 42a92ee9 Author: Daniel P. Berrangé <berrange@redhat.com> Date: Tue Nov 20 11:30:05 2018 +0000 network: add missing bandwidth limits for bridge forward type In the case of a network with forward=bridge, which has a bridge device listed, we are capable of setting bandwidth limits but fail to call the function to register them. Reviewed-by: NCole Robinson <crobinso@redhat.com> Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com> Unfortunately the wrong version of this patch was posted and reviewed and thus it lacked the code to actually apply the bandwidth settings to the bridge itself. Reviewed-by: NLaine Stump <laine@laine.org> Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>
-
由 Daniel P. Berrangé 提交于
Since the introduction of the virNetworkPort object, the network driver has a persistent record of ports that have been created against the networks. Thus the hypervisor drivers no longer communicate to the network driver during libvirtd restart. This change, however, meant that the connection usage counts were no longer re-initialized during a libvirtd restart. To deal with this we must iterate over all virNetworkPortDefPtr objects we have and invoke the notify callback to record the connection usage count. Reviewed-by: NLaine Stump <laine@laine.org> Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>
-
- 13 9月, 2019 6 次提交
-
-
由 Daniel P. Berrangé 提交于
The virTestOOMActive method was deleted in commit 2c52ecd9 Author: Daniel P. Berrangé <berrange@redhat.com> Date: Thu Aug 29 13:04:07 2019 +0100 util: purge all code for testing OOM handling Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>
-
由 Daniel P. Berrangé 提交于
This fixes bug in commit bbe2aa62 Author: Daniel P. Berrangé <berrange@redhat.com> Date: Thu Jul 26 17:24:30 2018 +0100 conf: simplify link from hostdev back to network device hostdevs have a link back to the original network device. This is fairly generic accepting any type of device, however, we don't intend to make use of this approach in future. It can thus be specialized to network devices. Reviewed-by: NCole Robinson <crobinso@redhat.com> Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com> which mistakenly deleted the assignment to the 'net' variable, which meant we never invoked the network driver release callback Reviewed-by: NMichal Privoznik <mprivozn@redhat.com> Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>
-
由 Daniel P. Berrangé 提交于
The functions are left returning an "int" to avoid an immediate big-bang cleanup. They'll simply never return anything other than 0. Reviewed-by: NMichal Privoznik <mprivozn@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com> Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>
-
由 Daniel P. Berrangé 提交于
Only a few of the _QUIET allocation macros are used. Since we're no longer reporting OOM as errors, we want to eliminate all the _QUIET variants. This starts with the easy, unused, cases. Reviewed-by: NMichal Privoznik <mprivozn@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com> Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>
-
由 Daniel P. Berrangé 提交于
The functions are left returning an "int" to avoid an immediate big-bang cleanup. They'll simply never return anything other than 0, except for virInsertN which can still return an error if the requested insertion index is out of range. Interestingly in that case, the _QUIET function would none the less report an error. Reviewed-by: NMichal Privoznik <mprivozn@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com> Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>
-
由 Daniel P. Berrangé 提交于
The OOM handling requires special build time options which we never enable in our CI. Even once enabled the tests are incredibly slow and typically require manual inspection of the results to weed out false positives. Since there was previous agreement to switch to abort on OOM in libvirt code, there's no point continuing to keep the unused OOM testing code. Reviewed-by: NMichal Privoznik <mprivozn@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com> Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>
-
- 12 9月, 2019 1 次提交
-
-
由 Daniel P. Berrangé 提交于
The virNetworkPortDef config stores the 'managed' attribute as the virTristateBool type. The virDomainDef config stores the 'managed' attribute as the bool type. Reviewed-by: NMichal Privoznik <mprivozn@redhat.com> Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>
-