We use _LAST items in enums to mark the last position in given
enum. Now, if and enum is passed to switch(), compiler checks
that all the values from enum occur in 'case' enumeration.
Including _LAST. But coverity spots it's a dead code. And it
really is. So to resolve this, we tend to put a comment just
above 'case ..._LAST' notifying coverity that we know this is a
dead code but we want to have it that way.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Do I really need to explain why?
Well, if read() is interrupted int the middle of reading, we will
never read the rest (even though it's highly unlikely as we are
reading just 8 bytes).
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Headers are bold already, so the font doesn't need to be that
big to draw attention.

All headers except for <h1> were already bold: make it bold as
well to increase visual consistency.

The menu should not take the focus away from the actual contents.

The menu should not take the focus away from the actual contents.

There's only one instance of that happening, and it looks
kinda off. Get rid of it, along with the corresponding
CSS rules.

Ensure all CSS rules are separated with a single blank line.

Caused by 3b6c8185.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Even though we have the machine locked throughout whole APIs we
are querying/modifying domain internal state. We should grab a
job whilst doing that.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Now that we have @flags we can support changing perf events just
in active or inactive configuration regardless of the other.
Previously, calling virDomainSetPerfEvents set events in both
active and inactive configuration at once. Even though we allow
users to set perf events that are to be enabled once domain is
started up. The virDomainGetPerfEvents API was flawed too. It
returned just runtime info.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Everywhere else we use a comma separated list. There's no good
reason to make 'perf' command an exception. Currently, it accepts
string list separated by '|'.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

We have a macro that does exactly what is done via full
enumeration.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

I've noticed that these APIs are missing @flags argument. Even
though we don't have a use for them, it's our policy that every
new API must have @flags.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

There are few lines off the indentation.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

They recently were extracted to a separate function. They don't belong
together though. Since -numa formatting is pretty compact, move it to
the main function and rename qemuBuildNumaCommandLine to
qemuBuildMemoryDeviceCommandLine.

When starting up a VM libvirtd asks numad to place the VM in case of
automatic nodeset. The nodeset would not be passed to the memory device
formatter and the user would get an error.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1269715

Commit 7068b56c introduced several hyperv features.  Not all hyperv
features are supported by old enough kernels and we shouldn't allow to
start a guest if kernel doesn't support any of the hyperv feature.

There is one exception, for backward compatibility we cannot error out
if one of the RELAXED, VAPIC or SPINLOCKS isn't supported, for the same
reason we ignore invtsc, to not break restoring saved domains with older
libvirt.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

This check is there to allow restore saved domain with older libvirt
where we included invtsc by default for host-passthrough model.  Don't
skip the whole function, but only the part that checks for invtsc.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

If the cpu cgroup is not found when validating an host for
LXC support, virt-host-validate will suggest to enable the
CONFIG_CGROUP_SCHED kconfig option.

The appropriate option is really CONFIG_CGROUP_CPU. The
QEMU checks already get that right, so no changes needed.

 * tools/nss/libvirt_nss.[ch]: add BSD-comptabile wrappers and
   register via the nss_module_register() interface
 * m4/virt-nss.m4: add checks if we're building NSS for FreeBSD
 * tools/Makefile.am: handle target library name differences, as
   Linux needs libnss_libvirt.so.2 and FreeBSD needs
   nss_libvirt.so.1. Also, different syms files have to be used
   as Linux needs to export all the methods while FreeBSD
   only needs to have nss_module_register()
 * tests/nsstest.c, tests/nssmock.c: s/__linux__/NSS/
 * tests/nssmock.c: pass int instead of mode_t to va_arg() to please
   gcc 4.8
 * libvirt_nss_bsd.syms: FreeBSD syms file

Remove disabling domain death events from libxlDomainStart error
path. The domain death event is already disabled in libxlDomainCleanup.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

libxlDomainStart allocates and reserves resources that were not
being released in error paths. libxlDomainCleanup already handles
the job of releasing resources, and libxlDomainStart should call
it when encountering a failure.

Change the error handling logic to call libxlDomainCleanup on
failure. This includes acquiring the lease sooner and allowing
it to be released in libxlDomainCleanup on failure, similar to
the way other resources are reclaimed. With the lease now
released in libxlDomainCleanup, the release_dom label can be
renamed to cleanup_dom to better reflect its changed semantics.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Rename cleanup_dom label to destroy_dom, which better describes what
it does.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Create a bitmap of iothreads that have scheduler info set so that the
transformation algorithm does not have to iterate the empty bitmap many
times. By reusing self-expanding bitmaps the bitmap size does not need
to be pre-calculated.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1264008

In some cases it's impractical to use the regular APIs as the bitmap
size needs to be pre-declared. These new APIs allow to use bitmaps that
self expand.

The new code adds a property to the bitmap to track the allocation of
memory so that VIR_RESIZE_N can be used.

 * Sync stubbed functions with prototypes
 * Add missing ATTRIBUTE_UNUSED where needed

Pushing under the build breaker rule.

Since commit v1.3.2-119-g1e34a8f9 which enabled debug-threads in QEMU
qemuGetProcessInfo would fail to parse stats for any thread with a space
in its name.

https://bugzilla.redhat.com/show_bug.cgi?id=1316803Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Use vshBlockJobOptionBandwidth to parse the bandwidth value which will
allow users to specify bandwidth in bytes or as a scaled integer.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1288000

Use vshBlockJobOptionBandwidth to parse the bandwidth value which will
allow users to specify bandwidth in bytes or as a scaled integer.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1288000

Use vshBlockJobOptionBandwidth to parse the bandwidth value which will
allow users to specify bandwidth in bytes or as a scaled integer.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1288000

Use vshBlockJobOptionBandwidth to parse the bandwidth value which will
allow users to specify bandwidth in bytes or as a scaled integer.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1288000

Historically we've used 'unsigned long' and allowed wrapping of negative
numbers for bandwidth values. Add a helper that will simplify adding
support for scaled integers and support for byte granularity while
keeping the compatibility with the older approach.

Fix control flow and spacing issues.

It was too similar to the non-scaled alternative.

before:
error: Numeric value 'abc' for <size> option is malformed or out of range
after:
error: Scaled numeric value 'abc' for <size> option is malformed or out of range

Move the function to qemu_domain.c and export them for further use.

Now that there are only two elements in the enum, let's change it to a
bool and rename the function similarly to the one added in previous
commit.