* src/Makefile.am: Add processinfo.h/processinfo.c
* src/util/processinfo.c, src/util/processinfo.h: Module providing
  APIs for getting/setting process CPU affinity
* src/qemu/qemu_driver.c: Switch over to new APIs for schedular
  affinity
* src/libvirt_private.syms: Export virProcessInfoSetAffinity
  and virProcessInfoGetAffinity to internal drivers

* src/util/iptables.c: `--option !  this` is deprecated in favor of
  `! --option this` syntax, change the output command accordingly

In the scenario where the cgroups were mounted but the
particular group did not exist, and the caller had not
requested auto-creation, the code would fail to return
an error condition. This caused the lxc_controller to
think the cgroup existed, and it then later failed when
attempting to use it

* src/util/cgroup.c: Raise an error if the cgroup path does not
  exist

* configure.in: add new --with-udev, disabled by default, and requiring
  libudev > 145
* src/node_device/node_device_udev.c src/node_device/node_device_udev.h:
  the new node device backend
* src/node_device/node_device_linux_sysfs.c: moved node_device_hal_linux.c
  to a better file name
* src/conf/node_device_conf.c src/conf/node_device_conf.h: add a couple
  of fields in node device definitions, and an API to look them up,
  remove a couple of unused fields from previous patch.
* src/node_device/node_device_driver.c src/node_device/node_device_driver.h:
  plug the new driver
* po/POTFILES.in src/Makefile.am src/libvirt_private.syms: add the new
  files and symbols
* src/util/util.h src/util/util.c: add a new convenience macro
  virBuildPath and virBuildPathInternal() function

* src/xen/xen_driver.c: Add support for VIR_MIGRATE_PERSIST_DEST flag
* src/xen/xend_internal.c: Add support for VIR_MIGRATE_UNDEFINE_SOURCE flag
* include/libvirt/virterror.h, src/util/virterror.c: Add new errorcode
  VIR_ERR_MIGRATE_PERSIST_FAILED

* src/libvirt.c src/lxc/lxc_conf.c src/lxc/lxc_container.c
  src/lxc/lxc_controller.c src/node_device/node_device_hal.c
  src/openvz/openvz_conf.c src/qemu/qemu_driver.c
  src/qemu/qemu_monitor_text.c src/remote/remote_driver.c
  src/storage/storage_backend_disk.c src/storage/storage_driver.c
  src/util/logging.c src/xen/sexpr.c src/xen/xend_internal.c
  src/xen/xm_internal.c: Steve Grubb <sgrubb@redhat.com> sent a code
  review and those are the fixes correcting the problems

Some monitor commands may take a very long time to complete. It is
not desirable to block other incoming API calls forever. With this
change, if an existing API call is holding the job lock, additional
API calls will not wait forever. They will time out after a short
period of time, allowing application to retry later.

* include/libvirt/virterror.h, src/util/virterror.c: Add new
  VIR_ERR_OPERATION_TIMEOUT error code
* src/qemu/qemu_driver.c: Change to a timed condition variable
  wait for acquiring the monitor job lock

* src/util/threads.h, src/util/threads-pthread.c,
  src/libvirt_private.syms: Add virCondWaitUntil()

* src/util/threads-pthread.c: pthreads APIs do not set errno, instead
  the return value is the positive errno. Set errno based on the return
  value in the wrappers

* src/util/pci.c, src/util/pci.h: Make the pciDeviceList struct
  opaque to callers of the API. Add accessor methods for managing
  devices in the list
* src/qemu/qemu_driver.c: Update to use APIs instead of directly
  accessing pciDeviceList fields

As it was basically unimplemented and more confusing than useful
at the moment.
* src/libvirt_private.syms: remove from internal symbols list
* src/qemu/qemu_bridge_filter.c src/util/ebtables.c: remove code and
  one use of the unimplemented function

* src/util/network.c: getIPv4Addr() got broken when the input
  network address value got converted from network to host byte order

* src/internal.h (ATTRIBUTE_SENTINEL): New, it's a ggc feature and
  protected as such
* src/util/buf.c (virBufferStrcat): Use it.
* src/util/ebtables.c (ebtablesAddRemoveRule): Use it.
* src/util/iptables.c (iptableAddRemoveRule: Use it.
* src/util/qparams.h (new_qparam_set, append_qparams): Use it.
* docs/apibuild.py: avoid breaking the API generator with that new
  internal keyword macro

* src/util/network.c: Add htons and ntohs in virSocket(Get|Set)Port

* include/libvirt/virterror.h src/util/virterror.c: add a new error
  VIR_ERR_CONFIG_UNSUPPORTED for valid but unsupported configuration options
* src/conf/domain_conf.c: Throw an error if guestfwd address isn't IPv4
  and cleanup a number of parsing return error values.

* configure.in: look for ebtables binary location if present
* src/Makefile.am: add the new module
* src/util/ebtables.[ch]: new module and internal APIs around
  the ebtables binary
* src/libvirt_private.syms: export the symbols only internally

All drivers have copy + pasted inadequate error reporting which wraps
util.c:virGetHostname. Move all error reporting to this function, and improve
what we report.

Changes from v1:
  Drop the driver wrappers around virGetHostname. This means we still need
  to keep the new conn argument to virGetHostname, but I think it's worth
  it.

Nearly all of the methods in src/util/util.h have error codes that
must be checked by the caller to correct detect & report failure.
Add ATTRIBUTE_RETURN_CHECK to ensure compile time validation of
this

* daemon/libvirtd.c: Add explicit check on return value of virAsprintf
* src/conf/domain_conf.c: Add missing check on virParseMacAddr return
  value status & report error
* src/network/bridge_driver.c: Add missing OOM check on virAsprintf
  and report error
* src/qemu/qemu_conf.c: Add missing check on virParseMacAddr return
  value status & report error
* src/security/security_selinux.c: Remove call to virRandomInitialize
  that's done in libvirt.c already
* src/storage/storage_backend_logical.c: Add check & log on virRun
  return status
* src/util/util.c: Add missing checks on virAsprintf/Run status
* src/util/util.h: Annotate all methods with ATTRIBUTE_RETURN_CHECK
  if they return an error status code
* src/vbox/vbox_tmpl.c: Add missing check on virParseMacAddr
* src/xen/xm_internal.c: Add missing checks on virAsprintf
* tests/qemuargv2xmltest.c: Remove bogus call to virRandomInitialize()

__in6_u.__u6_addr16 is the private name for this struct member,
s6_addr16 is the public one
* src/util/network.c: dont use the private field, but the public one.

* src/util/network.[ch] Add functions for address->text and get/set
  port number
* src/libvirt_private.syms: add new entry points

* src/util/network.c: fix a few typo

* src/util/network.h src/util/network.c: utilities to parse network
  addresses, check netmask and compute ranges

We can slightly tighten up the regex's used to detect the use of
nonreentrant functions.  We can also check src/util/virterror.c
by modifying a comment; I think it's worth it to get the additional
coverage.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

virXPathNodeSet() could return -1 when doing an evaluation failure
due to xmlXPathEval() from libxml2 behaviour.
* src/util/xml.c: make sure we always return 0 unless the returned
  XPath type is of the wrong type (meaning the query passed didn't
  evaluate to a node set and code must be fixed)

Most of the hash iterators need to modify either payload of
data args. The const annotation prevents this.

* src/util/hash.h, src/util/hash.c: Remove const-ness from
  virHashForEach/Iterator
* src/xen/xm_internal.c: Remove bogus casts

A cgroup file returns integer value terminated with '\n' and remaining
it has sometimes harmful effects, for example it leads virStrToLong_ull
to fail.
* src/util/cgroup.c: strip out terminating \n when reading a value

* src/util/buf.c: if virBufferEscapeString was called on a buffer that
  had 0 bytes of space, a size of -1 will be passed to snprintf, resulting
  in a segmentation fault, this preallocate some space.

The fread_file_lim() function uses fread() but never handles
EINTR results, causing unexpected failures when reading QEMU
help arg info. It was unneccessarily using FILE * instead
of plain UNIX file handles, which prevented use of saferead()

* src/util/util.c: Switch fread_file_lim over to use saferead
  instead of fread, remove FILE * use, and rename

* src/util/util.c: output some debug if caller of virExecWithHook have
  set envp[]

When configuring logging settings, keep more information about the
output destination. Add accessors to retrieve the filter and output
settings in the original string form; this to be used to set up
environment for a child process that also logs.

* src/util/logging.[ch]: add virLogGetFilters and virLogGetOutputs
  accessors and modify the internals (including virLogDefineOutput())
  to save the data needed for the accessors

* src/util/util.[ch]: Add virFileAbsPath() function to ensure an
  absolute path for a potentially realtive path.
* src/libvirt_private.syms: add it in libvirt private symbols

* daemon/Makefile.am: Fix missing sasl rule
* src/datatypes.c: Add unistd.h to avoid gnulib bug
* src/util/cgroup.c: Disable mntent if not available

The patch implements the missing memory control APIs for lxc, i.e.,
domainGetMaxMemory, domainSetMaxMemory, domainSetMemory, and improves
domainGetInfo to return proper amount of used memory via cgroup.

* src/libvirt_private.syms: Export virCgroupGetMemoryUsage
  and add missing virCgroupSetMemory
* src/lxc/lxc_driver.c: Implement missing memory functions
* src/util/cgroup.c, src/util/cgroup.h: Add the function
  to get used memory

Signed-off-by: NChris Lalancette <clalance@redhat.com>

* src/util/storage_file.c: add virStorageFileGetMetadata() so that
  the caller does not need to open the file

Finally, we get to the point of all this.

Move virStorageGetMetadataFromFD() to virStorageFileGetMetadataFromFD()
and move to src/util/storage_file.[ch]

There's no functional changes in this patch, just code movement

* src/storage/storage_backend_fs.c: move code from here ...

* src/util/storage_file.[ch]: ... to here

* src/libvirt_private.syms: export virStorageFileGetMetadataFromFD()

Introduce a metadata structure and make virStorageGetMetadataFromFD()
fill it in.

* src/util/storage_file.h: add virStorageFileMetadata

* src/backend/storage_backend_fs.c: virStorageGetMetadataFromFD() now
  fills in the virStorageFileMetadata structure