https://bugzilla.redhat.com/show_bug.cgi?id=994731

There was a '%' missing before the last {rhel}.
Tested on RHEL-7 this time.

In libxlDomainMigrationConfirm(), a transient domain is removed
from the domain list after successful migration.  Later in cleanup,
the domain object is unlocked, resulting in a crash

Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7fb4208ed700 (LWP 12044)]
0x00007fb4267251e6 in virClassIsDerivedFrom (klass=0xdeadbeef,
  parent=0x7fb42830d0c0) at util/virobject.c:169
169	        if (klass->magic == parent->magic)
(gdb) bt
0  0x00007fb4267251e6 in virClassIsDerivedFrom (klass=0xdeadbeef,
  parent=0x7fb42830d0c0) at util/virobject.c:169
1  0x00007fb42672591b in virObjectIsClass (anyobj=0x7fb4100082b0,
  klass=0x7fb42830d0c0) at util/virobject.c:365
2  0x00007fb42672583c in virObjectUnlock (anyobj=0x7fb4100082b0)
  at util/virobject.c:338
3  0x00007fb41a8c7d7a in libxlDomainMigrationConfirm (driver=0x7fb4100404c0,
  vm=0x7fb4100082b0, flags=1, cancelled=0) at libxl/libxl_migration.c:583

Fix by setting the virDomainObjPtr to NULL after removing it from
the domain list.

During migration, the libxl driver starts a modify job in the
begin phase, ending the job in the confirm phase.  This is
essentially VIR_MIGRATE_CHANGE_PROTECTION semantics, but the
driver does not support that flag.  Without CHANGE_PROTECTION
support, the job would never be terminated in error conditions
where migrate confirm phase is not executed.  Further attempts
to modify the domain would result in failure to acquire a job
after LIBXL_JOB_WAIT_TIME.

Similar to the qemu driver, end the job in the begin phase.
Protecting the domain object across all phases of migration can
be done in a future patch adding CHANGE_PROTECTION support.

In libxlDomainMigrationPrepare(), a new virDomainObj is created
from the incoming domain def and added to the driver's domain
list, but never removed if there are subsequent failures during
the prepare phase.

targethost# virsh list --all

sourcehost# virsh migrate --live dom xen+ssh://targethost/system
   error: operation failed: Fail to create socket for incoming migration.

targethost# virsh list --all
error: Failed to list domains
error: name in virGetDomain must not be NULL

After adding code to remove the domain on prepare failure, noticed
that libvirtd crashed due to double free of the virDomainDef.  Similar
to the qemu driver, pass a pointer to virDomainDefPtr so it can be set
to NULL once a virDomainObj is created from it.

In libxlDomainMigrationPrepare(), the cleanup label handles error
conditions and should be renamed as such for clarity.

Currently @flag is not used yet.
Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>

Qemu will fallback to aio=threads when the cache mode doesn't use
O_DIRECT, even if aio=native was explictly set.

Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1086704Signed-off-by: NGiuseppe Scrivano <gscrivan@redhat.com>

When run under an environment that inherits an ignored SIGPIPE
(hello, annoying buildbots), a syntax-check was producing quite
a bit of noise, such as:

> prohibit_argmatch_without_use
> grep: write error
> grep: write error
> /bin/sed: couldn't write 25 items to stdout: Broken pipe
> sed: couldn't write 1 item to stdout: Broken pipe
> 0.46 prohibit_argmatch_without_use

This has been fixed upstream in gnulib.  There are several other
portability improvements in our regular submodule update.

* .gnulib: Update to latest, in part for quieter syntax-check.
Signed-off-by: NEric Blake <eblake@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Over 66% of my last commit 66e70612 was not indented properly.

We only need ip6tables, which is now a part of the iptables package:
http://pkgs.fedoraproject.org/cgit/iptables.git/commit/?h=1392835

This needlessly pulls in iptables-services:
https://bugzilla.redhat.com/show_bug.cgi?id=1101510
which can conflict with firewalld:
https://bugzilla.redhat.com/show_bug.cgi?id=1101484

Cgroups code uses VIR_CGROUP_DEVICE_* flags to specify the mode but in
the end it needs to be converted to a string. Add a helper to do it and
use it in the cgroup code before introducing it into the rest of the
code.

When discovering a disk backing chain the parent disk's metadata need to
be populated into the guest images so that each piece of the backing
chain contains a copy of those. This will allow us to refactor the
security driver so that it will not need to carry around the original
disk definition.

We are going to modify storage source chains in place. Add a helper that
will copy relevant information such as security labels to the new
element if that doesn't contain it.

Now that we have pointers to store disk source information and thus can
easily exchange the structs behind we need a function to copy all the
data.

In the future we might need to track state of individual images. Move
the readonly and shared flags to the virStorageSource struct so that we
can keep them in a per-image basis.

Some of the further changes will propagate seclabels from a disk source
element into the backing store elements. This would change the XML
output of the backing store as the seclabels would be formatted for each
backing store element. Skip the seclabels formatting until we decide
that it's necessary.

Allow de-init of null storage sources.

Add a wrapper that determines the correct uid and gid for a certain
storage file and domain.

It will help re-using the function.

Now that we are able to select images from the backing chain via indexed
access we should also convert possible network sources to
qemu-compatible strings before passing them to qemu.

Now that we are able to select images from the backing chain via indexed
access we should also convert possible network sources to
qemu-compatible strings before passing them to qemu.

Introduce flag for the block rebase API to allow the rebase operation to
leave the chain relatively addressed. Also adds a virsh switch to enable
this behavior.

Introduce flag for the block commit API to allow the commit operation to
leave the chain relatively addressed. Also adds a virsh switch to enable
this behavior.

The qemu block info function relied on working with local storage. Break
this assumption by adding support for remote volumes. Unfortunately we
still need to take a hybrid approach as some of the operations require a
filedescriptor.

Previously you'd get:
 $ virsh domblkinfo gl vda
 error: cannot stat file '/img10': Bad file descriptor

Now you get some stats:
 $ virsh domblkinfo gl vda
 Capacity:       10485760
 Allocation:     197120
 Physical:       197120

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1110198

The gluster code had two functions for reading volume headers, remove
one and reuse the second one.

To allow reusing this function in the qemu driver we need to allow
specifying the storage format. Also separate return of the backing store
path now isn't necessary.

There was just one callsite left. Integrate the body to the only calling
function.

There is a missing include of $(top_srcdir)/include to handle
"libvirt/libvirt.h" header file.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1077009

For inactive domains, set both current and maximum memory
to the specified 'maximum memory' value.

This matches the behavior of QEMU driver's SetMaxMemory.

https://bugzilla.redhat.com/show_bug.cgi?id=1091132

Similary to cmdDetachDisk fetch the inactive definition when --config
is specified as the active may not contain the network interface
if it was plugged with --config.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1056902

Add startup auditing and also hotplug auditing for said devices.

Tiny fix for virt-lxc-convert: we are setting memory values in bytes, while
free may give us values in a different unit by default: force free to output
bytes with -b flag.

For the regular dump operation we migrate the VM to a file. This won't
work when the VM has passthrough devices assigned. Rather than reporting
a cryptic error from qemu run our check whether it can be migrated.

This does not influence the memory-only dump that is allowed with
passthrough devices.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=874418

We invoked virCgroupHasController twice for checking
VIR_CGROUP_CONTROLLER_DEVICES
in lxcDomainAttachDeviceDiskLive.
Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>

Commits e18a80a3 and 57e5c3c2 switched from a getenv wrapper which
does not allocate a string to virFileFindResource which does not,
without freeing it.

https://bugzilla.redhat.com/show_bug.cgi?id=1116427

Fixed some XML tags in the formatdomain page.
Signed-off-by: NMichele Paolino <m.paolino@virtualopensystems.com>