This reverts commit f4db846c.

This patch results in the following error when trying to start
essentially any VM with default network:

unsupported configuration: QOS must be defined for network 'default'

Coverity didn't see that the bandwidth == NULL it complained about in
virNetDevBandwidthPlug was already checked properly in
networkCheckBandwidth, thus causing networkPlugBandwidth to return 0
and finish before a call to virNetDevBandwidthPlug would have been even
made.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

This previous commit introduced a simpler free callback for
hash data with only 1 arg, the value to free:

  commit 49288fac
  Author: Peter Krempa <pkrempa@redhat.com>
  Date:   Wed Oct 9 15:26:37 2019 +0200

    util: hash: Add possibility to use simpler data free function in virHash

It missed two functions in the hash table code which need
to call the alternate data free function, virHashRemoveEntry
and virHashRemoveSet.

After the previous patch though, there is no code that
makes functional use of the 2nd key arg in the data
free function. There is merely one log message that can
be dropped.

We can thus purge the current virHashDataFree callback
entirely, and rename virHashDataFreeSimple to replace
it.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The virChrdevHashEntryFree method uses the hash 'key'
as the name of the logfile it has to remove. By storing
a struct as the value which contains the stream and
the dev path, we can avoid relying on the hash key
when free'ing entries.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Now that all pieces are in place (hopefully) let's enable -blockdev.

We base the capability on presence of the fix for 'auto-read-only' on
files so that blockdev works properly, mandate that qemu supports
explicit SCSI id strings to avoid ABI regression and that the fix for
'savevm' is present so that internal snapshots work.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

The 'savevm' HMP command didn't work properly with blockdev as it tried
to do snapshot of everything including the protocol nodes accessing
files which are not snapshottable. Qemu fixed this bug so now we need to
detect it to allow enabling blockdev.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

The top level commands now can have 'feature' flags for fixes so add
support for querying those as well.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Initial implementation of 'auto-read-only' didn't reopen the backing
files when needed. For '-blockdev' to work we need to be able to tel
qemu to open a file read-only and change it during blockjobs as we label
backing chains with a sVirt label which does not allow writing. The
dynamic auto-read-only supports this as it reopens files when writing
is demanded.

Add a capability to detect that the posix file based backends support
the dynamic part.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

The data is captured from qemu v4.2.0-rc2-19-g2061735ff0
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

The qemu driver will obey <backingStore> when we support blockdev.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Until now we've only supported <backingStore> in an output mode. The
documentation for the element states that hypervisor drivers may start
to obey it in the future.

Update the documentation so that it mentions the recently added
'backingStoreInput' domain capability and explain what happens if it is
supported and <backingStore> is present on input.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Historically we've only supported the <backingStore> as an output-only
element for domain disks. The documentation states that it may become
supported on input. To allow management apps detectin once that happens
add a domain capability which will be asserted if the hypervisor driver
will be able to obey the <backingStore> as configured on input.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

The XSL generator loads included HTML files relative to the source dir
but we need to tell it to load them from the build dir instead.
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Some of the web content is only present in the source tree, thus when
viewing pages from the build tree they appear missing.
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Reviewed-by: NPavel Hrdina <phrdina@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Reviewed-by: NPavel Hrdina <phrdina@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Reviewed-by: NPavel Hrdina <phrdina@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The API cross reference files are not used since

  commit d3043afe
  Author: Daniel Veillard <veillard@redhat.com>
  Date:   Mon Jan 21 08:08:33 2008 +0000

    Remove docs/API*.html
    * docs/API* docs/api.xsl docs/site.xsl docs/Makefile.am: remove the
      generation of the API*.html files as it's not really useful here
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Define automake variables for all the data we need built and installed
and let automake generate the install rules normally.
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Use a simple
  if "substr" in line
before running a regular expression, which saves time,
especially if the regex has a capture group.

This reduces runtime of the check by almost 78 % for me.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

For checking whether a substring is present in a string,
using the pattern:
    "str" in string
is slightly faster than:
    string.find("str") != -1

Use it to shave off 4 % of the runtime of this script that
processes quite a few long source files.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Running regular expressions with capture groups is expensive.
Bail out early if the line does not start with a '#'.

This reduces the runtime of the check by two thirds.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Getting the hostname of a guest usually requires a in-guest agent,
or generally can be determined only on active domains.
Signed-off-by: NPino Toscano <ptoscano@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

If user starts a blockcommit or a blockcopy then we modify access
for qemu on both images and leave it like that until the job
terminates.  So far so good. Problem is, if user instead of
terminating the job (where we would modify the access again so
that the state before the job is restored) calls destroy on the
domain or if qemu dies whilst executing the block job.  In this
case we don't ever clear the access we granted at the beginning.
To fix this, maybe a bit harsh approach is used, but it works:
after all labels were restored (that is after
qemuSecurityRestoreAllLabel() was called), we iterate over each
disk in the domain and remove XATTRs from the whole backing chain
and also from any file the disk is being mirrored to.

This would have been done at the time of pivot, but it isn't
because user decided to kill the domain instead. If we don't do
this and leave some XATTRs behind the domain might be unable to
start.

Also, secdriver can't do this because it doesn't know if there is
any job running. It's outside of its scope - the hypervisor
driver is responsible for calling secdriver's APIs.

Moreover, this is safe to call because we don't remember labels
for any member of a backing chain except of the top layer. But
that one was restored in qemuSecurityRestoreAllLabel() call done
earlier. Therefore, not only we don't remember labels (and thus
this is basically a NOP for other images in the backing chain) it
is also safe to call this when no blockjob was started in the
first place, or if some parts of the backing chain are shared
with some other domains - this is NOP, unless a block job is
active at the time of domain destroy.

https://bugzilla.redhat.com/show_bug.cgi?id=1741456#c19Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NPeter Krempa <pkrempa@redhat.com>

There are four places where we remove image XATTRs and in all of
them we have the same for() loop with the same body. Move it into
a separate function because I'm about to introduce fifth place
where the same needs to be done.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NPeter Krempa <pkrempa@redhat.com>

Install the convertor function which enables the internals that will use
-blockdev to make qemu open the firmware image and stop using -drive.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

The old way to instantiate a pflash device via -drive was a hack since
it's a platform device.

The modern approach calls for configuring it via -machine and takes the
node name as an argument.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

As a first step we will build the blockdevs which will be supposed to
back the pflash drives when moving away from -drive.

This code is similar to the way we build the blockdevs for the disk, but
skips the copy-on-read layer and doesn't implement any legacy approach.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Add a helper which will covert the PFLASH code file and variable file
into the virStorageSource objects stored in private data so that we can
use them with -blockdev while keeping the infrastructure to determine
the path to the loaders intact.

This is a temporary solution until we will want to do snapshots of the
pflash where we will be forced do track the full backing chain in the
XML.

In the meanwhile just convert it partially so that we can stop using
-drive.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

To allow converting the pflash drives to blockdev we will need a
virStorageSource to allow using our helpers. Temporarily prior to
coverting loader data to a virStorageSoruce add private data which will
house this.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Extract the old way to instantiate pflash devices to hold the firmware
via -drive to a separate function so that it can later be conditionally
disabled when -blockdev will be used.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Commit 5751a0b6 added a helper function
called virDomainCapsFeaturesInitUnsupported which initialized all domain
capability features as unsupported.

When adding a new feature this would initialize it as unsupported also
for hypervisor drivers which the original author possibly didn't intend
to modify. To prevent accidental wrong value being reported in such case
revert back to initializing individual features in the hypervisor
drivers themselves.

This is not a straight revert as additonal patches modified how we store
the capabilities.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Pre-Glib era which used malloc allowed the size of the client-side
buffers to be declared as 0, because malloc documents that it can either
return 0 or a unique pointer on 0 size allocations.
With glib this doesn't work anymore, because glib documents that for
such allocation requests NULL is always returned which results in an
error in our public API checks server-side.
This patch complements the fix in the RPC layer by explicitly erroring
out on the following combination of args used by our legacy APIs (their
moder equivalents don't suffer from this):

function(caller-allocated-array, size, ...) {
    if (!caller-allocated-array && size > 0)
        return error;
}

treating everything else as a valid input and potentially let that fail
on the server-side rather than client-side.

https://bugzilla.redhat.com/show_bug.cgi?id=1772842Signed-off-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Signed-off-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

The qemu_domain_monitor_event_msg struct in qemu_protocol.x
defines event as a nonnull_string and qemuMonitorJSONIOProcessEvent
also errors out on a non-NULL event.

Drop the check to fix the build with static analysis.

This essentially reverts commit d343e820Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Adding build time self tests for basic (deprecated), doorbell and plain mode.
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NChristian Ehrhardt <christian.ehrhardt@canonical.com>

Shared memory devices need qemu to be able to access certain paths
either for the shared memory directly (mostly ivshmem-plain) or for a
socket (mostly ivshmem-doorbell).

Add logic to virt-aa-helper to render those apparmor rules based
on the domain configuration.

https://bugzilla.redhat.com/show_bug.cgi?id=1761645Reviewed-by: NCole Robinson <crobinso@redhat.com>
Acked-by: NJamie Strandboge <jamie@canonical.com>
Signed-off-by: NChristian Ehrhardt <christian.ehrhardt@canonical.com>

There are currently broken use cases, e.g. snapshotting more than one disk at
once like:
 $ virsh snapshot-create-as --domain eoan --disk-only --atomic
   --diskspec vda,snapshot=no  --diskspec vdb,snapshot=no
   --diskspec vdc,file=/test/disk1.snapshot1.qcow,snapshot=external
   --diskspec vdd,file=/test/disk2.snapshot1.qcow,snapshot=external
The command above will iterate from qemuDomainSnapshotCreateDiskActive and
eventually add /test/disk1.snapshot1.qcow first (appears in the rules)
to then later add /test/disk2.snapshot1.qcow and while doing so throwing
away the former rule causing it to fail.

All other calls to (re)load_profile already use append=true when adding
rules append=false is only used when restoring rules [1].

Fix this by letting AppArmorSetSecurityImageLabel use append=true as well.

Since this is removing a (unintentional) trigger to revoke all rules
appended so far we agreed on review to do some tests, but in the tests
no rules came back on:
- hot-plug
- hot-unplug
- snapshotting

Bugs:
https://bugs.launchpad.net/libvirt/+bug/1845506
https://bugzilla.redhat.com/show_bug.cgi?id=1746684

[1]: https://bugs.launchpad.net/libvirt/+bug/1845506/comments/13Reviewed-by: NCole Robinson <crobinso@redhat.com>
Acked-by: NJamie Strandboge <jamie@canonical.com>
Signed-off-by: NChristian Ehrhardt <christian.ehrhardt@canonical.com>

A lot of the code in AppArmorSetSecurityImageLabel is a duplicate of
what is in reload_profile, this refactors AppArmorSetSecurityImageLabel
to use reload_profile instead.
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Acked-by: NJamie Strandboge <jamie@canonical.com>
Signed-off-by: NChristian Ehrhardt <christian.ehrhardt@canonical.com>

reload_profile calls get_profile_name for no particular gain, lets
remove that call. The string isn't used in that function later on
and not registered/passed anywhere.

It can only fail if it either can't allocate or if the
virDomainDefPtr would have no uuid set (which isn't allowed).

Thereby the only "check" it really provides is if it can allocate the
string to then free it again.

This was initially added in [1] when the code was still in
AppArmorRestoreSecurityImageLabel (later moved) and even back then had
no further effect than described above.

[1]: https://libvirt.org/git/?p=libvirt.git;a=blob;f=src/security/security_apparmor.c;h=16de0f26f41689e0c50481120d9f8a59ba1f4073;hb=bbaecd6a8f15345bc822ab4b79eb0955986bb2fd#l487Reviewed-by: NCole Robinson <crobinso@redhat.com>
Acked-by: NJamie Strandboge <jamie@canonical.com>
Signed-off-by: NChristian Ehrhardt <christian.ehrhardt@canonical.com>