This capability flags support for `-device pvscsi`, which provides the
VMware paravirtual SCSI controller.
Signed-off-by: NChris Jester-Young <cky@cky.nz>
Reviewed-by: NPeter Krempa <pkrempa@redhat.com>

Remember the preferred placement of <auth> and <encryption> for a disk
source across libvirtd restarts.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Modern way to store <auth> and <encryption> of a <disk> is under
<source>. This was added to mirror how <backingStore> handles these and
in fact they are relevant to the source rather than to any other part of
the disk. Historically we allowed them to be directly under <disk> and
we need to keep compatibility.

This wasn't a problem until introduction of -blockdev in qemu using of
<auth> or <encryption> plainly wouldn't work with backing chains.

Now that it works in backing chains and can be moved back and forth
using snapshots/block-commit we need to ensure that the original
placement is properly kept even if the source changes.

To achieve the above semantics we need to store the preferred placement
with the disk definition rather than the storage source definitions and
also ensure that the modern way is chosen when the VM started with
<source/encryption> only in the backing store.

https://bugzilla.redhat.com/show_bug.cgi?id=1822878Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Historically the virtio-blk frontend by default enabled SCSI emulation
and tried to do SCSI command passthrough. As this was enabled by default
there's a fallback mechanism in place in cases when the backend doesn't
support SCSI for any reason.

This is not the case when disk type=lun is used with 'scsi-block' via
'virtio-scsi'.

We did not restrict configurations when the user picks 'qcow2' or any
other format as format of the disk, in which case the emulation is
disabled as such configuration doesn't make sense.

This patch unifies the approach so that 'raw' is required both when used
via 'virtio-blk' and 'virtio-scsi' so that the user is presented with
the expected configuration. Note that use of <disk type='lun'> is
already very restrictive as it requires a block device or iSCSI storage.

Additionally the scsi emulation is now deprecated by qemu with
virtio-blk as it conflicts with virtio-1 and the alternative is to use
'virtio-scsi' which performs better and is along for a very long time.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

The property was deprecated. Don't format it based on the new capability
if the user didn't explicitly request it.

https://bugzilla.redhat.com/show_bug.cgi?id=1829550Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Historically the 'scsi' passthrough feature of virtio-blk-pci
was enabled by default. Libvirt was disabling it due to security
implications outlined in libvirt commit v0.9.9-4-g177db087 if it was
not explicitly requested. In qemu commit v2.4.0-1566-ged65fd1a27 the
default value was changed to disabled in preparation for virtio-1.
Starting from QEMU-5.0 the 'scsi' property was also deprecated. There
replacement for the functionality is to use 'virtio-scsi' for the
purpose. This isn't a direct replacement though.

Add capability named QEMU_CAPS_VIRTIO_BLK_SCSI_DEFAULT_DISABLED which
allows us to stop formatting the 'scsi=' property if it's disabled by
default and not requested so that we don't use deprecated features.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Help QEMU in deprecation of -drive if=none without the need to refactor
all old boards. Stop masking out -blockdev support when -drive if=sd
needs to be used. We achieve this by forbidding blockjobs and
special-casing all other code paths. Blockjobs are sacrificed in this
case as SD cards are a corner case for some ARM boards and are thus not
used commonly.

https://bugzilla.redhat.com/show_bug.cgi?id=1821692Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

We can't set the type of the device on the 'sd' bus and realistically a
cdrom doesn't even make sense there. Forbid it.

Note that the output of in disk-cdrom-bus-other.x86_64-latest.args
switched to blockdev as it's no longer locked out due to use of a disk
on 'sd' bus.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

The 'vexpress-a9' ARM board supports the native 'sd' bus as well as
virtio. Add a test case for proving that upcoming changes to handling of
'sd' work. This config was also tested with real qemu and the qemu
process starts correctly.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

In case of 'sd' cards we'll use pre-blockdev code also if qemu supports
blockdev. In that specific case we'll need to mask out blockdev support
for 'sd' disks. Plumb in a boolean to allow it.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Remove the function and passing of 'def' through the callers.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Previously we've validated it in qemuCheckDiskConfig which was directly
called from the command line generator. Move the checks to the validator
where they belong.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Move the code from qemuCheckDiskConfigBlkdeviotune in
src/qemu/qemu_commandline.c to
qemuValidateDomainDeviceDefDiskBlkdeviotune.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Switch to DO_TEST_CAPS_LATEST for all of them and also add pre-blockdev
case for 'disk-discard' as we had it before.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Move the tests to DO_TEST_CAPS_LATEST. Since switch to blockdev stopped
us formatting the tunning parameters on the command line let's also add
version cases for qemu-4.1 data which doesn't enable blockdev.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Commit a13b2905 missed an adjustment to a test that is only run when
building against xen <= 4.9, where LIBXL_HAVE_BUILDINFO_NESTED_HVM is
not defined. Adjust fullvirt-cpuid-legacy-nest test similar to the others.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

When no video device is specified in config we should set both
hvm.nographic to 1 and hvm.vga.kind to NONE.

Without hvm.vga.kind=LIBXL_VGA_INTERFACE_TYPE_NONE both -nographic and
-device 'cirrus-vga' are on qemu cmdline.
Signed-off-by: NArtur Puzio <contact@puzio.waw.pl>
Reviewed-by: NJim Fehlig <jfehlig@suse.com>

Turns out that it's not enough to pass the qemu:///embed root to
virQEMUDriverConfigNew(), you also have to make sure the same
string is copied into the virQEMUDriver structure yourself, and
not doing so in our case resulted in the cleanup never happening
and in distcheck failing because of that.

On the other hand, actually setting config->embeddedRoot would
result in different paths being generated for each test run, which
would obviously break qemuxml2argvtest, so that's not an option
either.

This reverts commit d98cc196.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

Now that the QEMU driver natively supports storing all its runtime
data inside an arbitrary directory, we can avoid having multiple
copies of the same logic in the test suite.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

To attempt to catch unit tests which accidentally create files in $HOME,
or $XDG_RUNTIME_DIR, poison these env vars by pointing them to
directories which don't exist. This should give easier to debug test
failures. For example:

$ VIR_TEST_DEBUG=1 ./qemuhotplugtest
Could not initialize HostdevManager - operation failed: Failed to create state dir '/bad-test-used-env-xdg-runtime-dir/libvirt/hostdevmgr'
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

We need this for all tests that use virHostdevManager, because
during creation of this object for unprivileged connections
like those used in the test suite we would end up writing inside
the user's home directory.

That's bad manners in general, but when running the test suite
inside a purposefully constrained environment such as the one
exposed by pbuilder, it turns into an outright test failure:

  Could not initialize HostdevManager - operation failed: Failed
  to create state dir '/nonexistent/.cache/libvirt/hostdevmgr'
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

The churn in the output files is caused primarily by the fact that
blockdev support has been introduced.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

The churn in the output files is caused primarily by the fact that
replies were generated on a POWER9 machine, which is good because
we didn't have coverage of that before.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Currently, qemucapsprobe fails when libvirt is not already installed
on the system:

  $ ./tests/qemucapsprobe /path/to/qemu-system-ppc64 >/dev/null
  I/O warning : failed to load external entity "/usr/share/libvirt/cpu_map/index.xml"
  2020-05-06 09:49:59.136+0000: 269822: info : libvirt version: 6.4.0
  2020-05-06 09:49:59.136+0000: 269822: info : hostname: [...]
  2020-05-06 09:49:59.136+0000: 269822: warning : virQEMUCapsLogProbeFailure:5127 :
  Failed to probe capabilities for /path/to/qemu-system-ppc64: XML error: failed to
  parse xml document '/usr/share/libvirt/cpu_map/index.xml'

It would be great if the tool could work entirely out of the build
directory, and this patch achieves just that.
Suggested-by: NPeter Krempa <pkrempa@redhat.com>
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Start the new capability file for the new development cycle of QEMU.

Note that compared to previous version this was generated on an AMD cpu.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Instead of the following pattern:

  type ret;
  ...
  ret = func();
  return ret;

we can use:

  return func()

directly.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Since QEMU 2.10 it is possible to disable TCG when building
QEMU. Introduce a capability that reflects this.
Signed-off-by: NTobin Feldman-Fitzthum <tobin@linux.vnet.ibm.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Move capability validation of virtio options from command line
generation to post-parse device validation where it belongs.
Signed-off-by: NBjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

Add separate tests for individual options and devices for virtio-options
to have the ability to do more fine-granular testing of various
combinations.

Also, add negative tests for unavailable capabilities.
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: NBjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

Convert the virtio-options test in qemuxml2argv and qemuxml2xml to use
the latest available QEMU capabilities.
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: NBjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

This patch adds the implementation of the IBS pSeries feature,
using the QEMU_CAPS_MACHINE_PSERIES_CAP_IBS capability added
in the previous patch.

IBS can have the following values: "broken", "workaround",
"fixed-ibs", "fixed-ccd" and "fixed-na".

This is the XML format for the cap:

<features>
  <ibs value='fixed-ibs'/>
</features>
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

IBS (Indirect Branch Speculation) is the last capability added
in QEMU 2.12 related to Spectre mitigation for Power. It was
added in commit 4be8d4e7d935.

This patch introduces it as QEMU_CAPS_MACHINE_PSERIES_CAP_IBS.
Like CFPC and SBBC, users might want to tune in IBS based on
their HW and guest OS requirements, and it's better to do it
so in a proper Libvirt feature than to put QEMU arguments
in the middle of the domain XML.
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

This patch adds the implementation of the SBBC pSeries feature,
using the QEMU_CAPS_MACHINE_PSERIES_CAP_SBBC capability added
in the previous patch.

Like the previously added CFPC feature, SBBC can have the values
"broken", "workaround" or "fixed". Extra code is required to handle
it since it's not a regular tristate capability.

This is the XML format for the cap:

<features>
  <sbbc value='workaround'/>
</features>
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

SBBC (Speculation Barrier Bounds Checking) is another capability
related to Spectre mitigation efforts in Power processors. It
was implemented in QEMU 2.12 by commit 09114fd81799.

This patch introduces it as QEMU_CAPS_MACHINE_PSERIES_CAP_SBBC to
be implemented in the next patch. Like the case with the now
implemented CFPC, exposing this feature in the XML allows for
a cleaner way for users to tune the SBBC accordingly, given
that not all hypervisor and guest setups supports this
Spectre mitigation.
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

This patch adds the implementation of the CFPC pSeries feature,
using the QEMU_CAPS_MACHINE_PSERIES_CAP_CFPC capability added
in the previous patch.

CPFC can have the values "broken", "workaround" or "fixed". Extra
code is required to handle it since it's not a regular tristate
capability.

This is the XML format for the cap:

<features>
  <cfpc value='workaround'/>
</features>
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

CFPC (Cache Flush on Privilege Change) is one of the capabilities
added to QEMU to mitigate Spectre vulnerabilities in Power chips.
It was implemented in QEMU 2.12 by commit 6898aed77f46.

This capability is still used today due to differences in how
the host setup (hardware and firmware/kernel) can handle this
mitigation. Its default value also varies with the pseries machine
version of the time. There's also certain OSes, like AIX, that
might not support the default value of the pseries machine the
guest uses.

Exposing this in the Libvirt XML as a feature will allow users to tune
CFPC values in a cleaner way, instead of hacking parameters in
<qemu:commandline> elements.
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

To prevent unexpected situations where a change in code would stop
looking at some of the tested commands go unnoticed add a mechanism to
force consumption of all test items.

Since there are a few tests which would be hard to fix add also a
mechanism to opt-out of the check.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

For each test monitor entry store an optional string which will allow to
identify it. This will be used later when checking that all registered
monitor commands were used.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>