Upping an interface for no reason and not configuring it is a cardinal sin.

With the default addrgenmode if eui64 it sticks a link-local address to the
interface. That is not good, as NetworkManager would see an address configured,
assume the interface is already configured and won't touch it iself and the
interface might stay unconfigured until the end of the days.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1124721Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
(cherry picked from commit c3cf3c43)

Add more logging to the lxc controller and container files to
facilitate debugging startup problems. Also make it clear when
the container is going to close stdout and thus no longer do
any logging.

Reported and patch provided by Bastian Blank at

    https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=769600

Don't activate LXC network device if <link state='down'/> has been set
in its configuration.

Actually set routes in lxc containers if there are defined ones.

Uses the new virDomainNetDef ips to set the IP addresses on the network
interfaces in the container.

Some programs want to change some values for the network interfaces
configuration in /proc/sys/net/ipv[46] folders. Giving RW access on them
allows wicked to work on openSUSE 13.2+.

Reusing the lxcNeedNetworkNamespace function to tell
lxcContainerMountBasicFS if the netns is disabled. When no netns is
set up, then we don't mount the /proc/sys/net/ipv[46] folder RW as
these would provide full access to the host NICs config.

virReportSystemError is reserved for reporting system errors, calling it
with VIR_ERR_* error codes produces error messages that do not make any
sense, such as

    internal error: guest failed to start: Kernel doesn't support user
    namespace: Link has been severed

We should prohibit wrong usage with a syntax-check rule.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The typical case where we had a problem is with such a filesystem
definition as created by virt-sandbox-service:

    <filesystem type='bind' accessmode='passthrough'>
      <source dir='/var/lib/libvirt/filesystems/mysshd/var'/>
      <target dir='/var'/>
    </filesystem>

In this case, we don't want to unmount the /var subtree or we may
loose the access to the source folder.

Resolving symlinks can fail before mounting any file system if one file
system depends on another being mounted. Symlinks are now resolved in
two passes:

  * Before any file system is mounted, but then we are more gentle if
    the source path can't be accessed
  * Right before mounting a file system, so that we are sure that we
    have the resolved path... but then if it can't be accessed we raise
    an error.

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

A domain without a console quietly dies soon after start,
because we try to set /dev/null as a controlling TTY
2014-10-30 15:10:59.705+0000: 1: error : lxcContainerSetupFDs:283 :
ioctl(TIOCSCTTY) failed: Inappropriate ioctl for device

Report an error early instead of trying to start it.

https://bugzilla.redhat.com/show_bug.cgi?id=1155410

We lacked of HOME environment variable,
set 'HOME=/' as default.

The kernel sets up $HOME for the init process.
Therefore any init can assume that $HOME is set.
libvirt currently violates that implicit rule.
Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Memory is allocated for 'mnt_src' by VIR_STRDUP in the loop. Next
loop it will be allocated again. So we need to free 'mnt_src'
before continue the loop.
Signed-off-by: NWang Rui <moon.wangrui@huawei.com>

For the values "default", "on", "off"

Replaces
virDeviceAddressPCIMulti
virDomainFeatureState
virDomainIoEventFd
virDomainVirtioEventIdx
virDomainDiskCopyOnRead
virDomainMemDump
virDomainPCIRombarMode
virDomainGraphicsSpicePlaybackCompression

The patch described above introduced two problems caught by the compiler
and thus breaking the build.

One of the problems was comparison of unsigned with < 0 and the second
one jumped a variable init.

Added <capabilities> in the <features> section of LXC domains
configuration. This section can contain elements named after the
capabilities like:

  <mknod state="on"/>, keep CAP_MKNOD capability
  <sys_chroot state="off"/> drop CAP_SYS_CHROOT capability

Users can restrict or give more capabilities than the default using
this mechanism.

kernel commit 7dc5dbc879bd0779924b5132a48b731a0bc04a1e
forbid us doing a fresh mount for sysfs
when enable userns but disable netns.
This patch will create a bind mount in this senario.
Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>

LXC network devices can now be assigned a custom NIC device name on the
container side. For example, this is configured with:

    <interface type='network'>
      <source network='default'/>
      <guest dev="eth1"/>
    </interface>

In this example the network card will appear as eth1 in the guest.

They report errors in all other cases.

Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Right now, a caller waiting for a child process either requires
the child to have status 0, or must use WIFEXITED() and friends
itself.  But in many cases, we want the middle ground of treating
fatal signals as an error, and directly accessing the normal exit
value without having to use WEXITSTATUS(), in order to easily
detect an expected non-zero exit status.  This adds the middle
ground to the low-level virProcessWait; the next patch will add
it to virCommand.

* src/util/virprocess.h (virProcessWait): Alter signature.
* src/util/virprocess.c (virProcessWait): Add parameter.
(virProcessRunInMountNamespace): Adjust caller.
* src/util/vircommand.c (virCommandWait): Likewise.
* src/util/virfile.c (virFileAccessibleAs): Likewise.
* src/lxc/lxc_container.c (lxcContainerHasReboot)
(lxcContainerAvailable): Likewise.
* daemon/libvirtd.c (daemonForkIntoBackground): Likewise.
* tools/virt-login-shell.c (main): Likewise.
* tools/virsh-domain.c (cmdLxcEnterNamespace): Likewise.
* tests/testutils.c (virtTestCaptureProgramOutput): Likewise.
* tests/commandtest.c (test23): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

The virDomainGetRootFilesystem method can be generalized to allow
any filesystem path to be obtained.

While doing this, start a new test case for purpose of testing various
helper methods in the domain_conf.{c,h} files, such as this one.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Tmpfs relative size and default 50% size values aren't supported as
we have no idea of the available memory at the conversion time.

Systemd specified that any /dev/pts/NNN device on which it
is expected to spawn a agetty login, should be listed in
the 'container_ttys' env variable. It should just contain
the relative paths, eg 'pts/0' not '/dev/pts/0' and should
be space separated.

http://cgit.freedesktop.org/systemd/systemd/commit/?id=1d97ff7dd71902a5604c2fed8964925d54e09de9Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The newroot is not mounted as tmpfs, we bind root->src to it.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

re-mount it again.
Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>

Currently, if virFileMakePath() fails, the @ret is left initialized from
virAsprintf() just a few lines above leading to a wrong return value of
zero whereas -1 should be returned.
Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

When setting up filesystems backed by block devices or file
images, the SELinux mount options must be used to ensure the
correct context is set
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Move the code for lxcContainerGetSubtree into the virfile
module creating 2 new functions

  int virFileGetMountSubtree(const char *mtabpath,
                             const char *prefix,
                             char ***mountsret,
                             size_t *nmountsret);
  int virFileGetMountReverseSubtree(const char *mtabpath,
                                    const char *prefix,
                                    char ***mountsret,
                                    size_t *nmountsret);

Add a new virfiletest.c test case to validate the new code.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Add virStringSortCompare and virStringSortRevCompare as
standard functions to use with qsort.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Also after commit 5ff9d8a65ce80efb509ce4e8051394e9ed2cd942
vfs: Lock in place mounts from more privileged users,

unprivileged user has no rights to umount the mounts that
inherited from parent mountns.

right now, I have no good idea to fix this problem, we need
to do more research. this patch just skip unmounting these
mounts for shared root.

BTW, I think when libvirt lxc enables user namespace, the
configuation that shares root with host is very rara.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

After kernel commit 5ff9d8a65ce80efb509ce4e8051394e9ed2cd942
vfs: Lock in place mounts from more privileged users,

unprivileged user has no rights to move the mounts that
inherited from parent mountns. we use this feature to move
the /stateDir/domain-name.{dev, devpts} to the /dev/ and
/dev/pts directroy of container. this commit breaks libvirt lxc.

this patch changes the behavior to bind these mounts when
user namespace is enabled and move these mounts when user
namespace is disabled.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

Don't do duplicate work when getting pagesize.
Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>

Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.

* src/lxc/lxc_container.c: Consistently use commas.
* src/openvz/openvz_driver.c: Likewise.
* src/openvz/openvz_util.c: Likewise.
* src/remote/remote_driver.c: Likewise.
* src/test/test_driver.c: Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Currently we were storing domain feature flags in a bit field as the
they were either enabled or disabled. New features such as paravirtual
spinlocks however can be tri-state as the default option may depend on
hypervisor version.

To allow storing tri-state feature state in the same place instead of
having to declare dedicated variables for each feature this patch
refactors the bit field to an array.