Skip to content

L
libvirt

openeuler / libvirt

通知 3
Star 0
Fork 0
L
libvirt

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 20 11月, 2014 2 次提交
  3. 19 11月, 2014 5 次提交
    • E
      maint: forbid 'int foo = true' · eb909376
      由 Eric Blake 提交于 
      I noticed this while working on qemuDomainGetBlockInfo.  Assigning
a bool value to an int variable compiles fine, but raises red flags
on the maintenance front as it becomes too easy to assign -1 or 2
or any other non-bool value to the same variable.

* cfg.mk (sc_prohibit_int_assign_bool): New rule.
* src/conf/snapshot_conf.c (virDomainSnapshotRedefinePrep): Fix
offenders.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo)
(qemuDomainSnapshotCreateXML): Likewise.
* src/test/test_driver.c (testDomainSnapshotAlignDisks):
Likewise.
* src/util/vircgroup.c (virCgroupSupportsCpuBW): Likewise.
* src/util/virpci.c (virPCIDeviceBindToStub): Likewise.
* src/util/virutil.c (virIsCapableVport): Likewise.
* tools/virsh-domain-monitor.c (cmdDomMemStat): Likewise.
* tools/virsh-domain.c (cmdBlockResize, cmdScreenshot)
(cmdInjectNMI, cmdSendKey, cmdSendProcessSignal)
(cmdDetachInterface): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>
      eb909376
    • E
      virdbus: don't force users to pass int for bool values · 2aa167ca
      由 Eric Blake 提交于 
      Use of an 'int' to represent a 'bool' value is confusing.  Just
because dbus made the mistake of cementing their 4-byte wire
format of dbus_bool_t into their API doesn't mean we have to
repeat the mistake.  With a little bit of finesse, we can
guarantee that we provide a large-enough value to the DBus
code, while still copying only the relevant one-byte bool
to the client code, and isolate the rest of our code base from
the DBus stupidity.

* src/util/virdbus.c (GET_NEXT_VAL): Add parameter.
(virDBusMessageIterDecode): Adjust all clients.
* src/util/virpolkit.c (virPolkitCheckAuth): Use nicer type.
* tests/virdbustest.c (testMessageSimple, testMessageStruct):
Test new behavior.
Signed-off-by: NEric Blake <eblake@redhat.com>
      2aa167ca
    • C
      storage: wrap storage_driver.c to 80 columns · bac66a60
      由 Chen Hanxiao 提交于 
      Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>
      bac66a60
    • Y
      vbox: fix a bug in _machineStateInactive · 9b7e7e34
      由 Yohan BELLEGUIC 提交于 
      This function returned non-inactive domains instead of active
domains.  This broke virConnectNumOfDefinedDomains() and
virConnectListDefinedDomains() functions.
      9b7e7e34
    • A
      network: Add network bandwidth support to ethernet interfaces · 22cff52a
      由 Anirban Chakraborty 提交于 
      Ethernet interfaces in libvirt currently do not support bandwidth setting.
For example, following xml file for an interface will not apply these
settings to corresponding qdiscs.

    <interface type="ethernet">
      <mac address="02:36:1d:18:2a:e4"/>
      <model type="virtio"/>
      <script path=""/>
      <target dev="tap361d182a-e4"/>
      <bandwidth>
        <inbound average="984" peak="1024" burst="64"/>
        <outbound average="2000" peak="2048" burst="128"/>
      </bandwidth>
    </interface>
Signed-off-by: NAnirban Chakraborty <abchak@juniper.net>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
      22cff52a
  5. 15 11月, 2014 18 次提交
  7. 14 11月, 2014 3 次提交
    • D
      Re-add use of locking with iptables/ip6tables/ebtables · dc33e6e4
      由 Daniel P. Berrange 提交于 
      A previous commit introduced use of locking with invocation
of iptables in the viriptables.c module

  commit ba95426d
  Author: Serge Hallyn <serge.hallyn@ubuntu.com>
  Date:   Fri Nov 1 12:36:59 2013 -0500

    util: use -w flag when calling iptables

This only ever had effect with the virtual network driver,
as it was not wired up into the nwfilter driver. Unfortunately
in the firewall refactoring the use of the -w flag was
accidentally lost.

This patch introduces it to the virfirewall.c module so that
both the virtual network and nwfilter drivers will be using
it. It also ensures that the equivalent --concurrent flag
to ebtables is used.
      dc33e6e4
    • J
      qemu: Don't try to parse -help for new QEMU · ae3e29e6
      由 Jiri Denemark 提交于 
      Since QEMU 1.2.0, we switched to QMP probing instead of parsing -help
(and other commands, such as -cpu ?) output. However, if QMP probing
failed, we still tried starting QEMU with various options and parsing
the output, which was guaranteed to fail because the output changed.
Let's just refuse parsing -help for QEMU >= 1.2.0.

https://bugzilla.redhat.com/show_bug.cgi?id=1160318Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
      ae3e29e6
    • J
      qemu: Always set migration capabilities · ab393383
      由 Jiri Denemark 提交于 
      We used to set migration capabilities only when a user asked for them in
flags. This is fine when migration succeeds since the QEMU process is
killed in the end but in case migration fails or if it's cancelled, some
capabilities may remain turned on with no way to turn them off. To fix
that, migration capabilities have to be turned on if requested but
explicitly turned off in case they were not requested but QEMU supports
them.

https://bugzilla.redhat.com/show_bug.cgi?id=1163953Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
      ab393383
  9. 13 11月, 2014 5 次提交
  11. 12 11月, 2014 7 次提交
    • J
      storage: Introduce 'managed' for the fchost parent · 5530f248
      由 John Ferlan 提交于 
      https://bugzilla.redhat.com/show_bug.cgi?id=1160926

Introduce a 'managed' attribute to allow libvirt to decide whether to
delete a vHBA vport created via external means such as nodedev-create.
The code currently decides whether to delete the vHBA based solely on
whether the parent was provided at creation time. However, that may not
be the desired action, so rather than delete and force someone to create
another vHBA via an additional nodedev-create allow the configuration of
the storage pool to decide the desired action.

During createVport when libvirt does the VPORT_CREATE, set the managed
value to YES if not already set to indicate to the deleteVport code that
it should delete the vHBA when the pool is destroyed.

If libvirtd is restarted all the memory only state was lost, so for a
persistent storage pool, use the virStoragePoolSaveConfig in order to
write out the managed value.

Because we're now saving the current configuration, we need to be sure
to not save the parent in the output XML if it was undefined at start.
Saving the name would cause future starts to always use the same parent
which is not the expected result when not providing a parent. By not
providing a parent, libvirt is expected to find the best available
vHBA port for each subsequent (re)start.

At deleteVport, use the new managed value to decide whether to execute
the VPORT_DELETE.  Since we no longer save the parent in memory or in
XML when provided, if it was not provided, then we have to look it up.
      5530f248
    • J
      storage: Introduce virStoragePoolSaveConfig · 523c6908
      由 John Ferlan 提交于 
      https://bugzilla.redhat.com/show_bug.cgi?id=1160926

Introduce the ability to save a configuration of a persistent configuration
that may be changed by storage pool backend activity, such as start or stop
      523c6908
    • J
      storage: Don't use a stack copy of the adapter · 5b226fcd
      由 John Ferlan 提交于 
      https://bugzilla.redhat.com/show_bug.cgi?id=1160926

Passing a copy of the storage pool adapter to a function just changes the
copy of the fields in the particular function and then when returning to
the caller those changes are discarded.  While not yet biting us in the
storage clean-up case, it did cause an issue for the fchost storage pool
startup case, createVport.  The issue was at startup, if no parent is found
in the XML, the code will search for the 'best available' parent and then
store that in the in memory copy of the adapter.  Of course, in this case
it was a copy, so when returning to the virStorageBackendSCSIStartPool that
change was discarded (or lost) from the pool->def->source.adapter which
meant at shutdown (deleteVport), the code assumed no adapter was passed
and skipped the deletion, leaving the vHBA created by libvirt still defined
requiring an additional stop of a nodedev-destroy to remove.

Adjusted the createVport to take virStoragePoolDefPtr instead of the
adapter copy. Then use the virStoragePoolSourceAdapterPtr when processing.
A future patch will need the 'def' anyway, so this just sets up for that.
      5b226fcd
    • J
      storage: Ensure fc_host parent matches wwnn/wwpn · 42a021c1
      由 John Ferlan 提交于 
      https://bugzilla.redhat.com/show_bug.cgi?id=1160565

The existing code assumed that the configuration of a 'parent' attribute
was correct for the createVport path. As it turns out, that may not be
the case which leads errors during the deleteVport path because the
wwnn/wwpn isn't associated with the parent.

With this change the following is reported:

error: Failed to start pool fc_pool_host3
error: XML error: Parent attribute 'scsi_host4' does not match parent 'scsi_host3' determined for the 'scsi_host16' wwnn/wwpn lookup.

for XML as follows:

  <pool type='scsi'>
    <name>fc_pool</name>
    <source>
      <adapter type='fc_host' parent='scsi_host4' wwnn='5001a4aaf3ca174b' wwpn='5001a4a77192b864'/>
    </source>

Where 'nodedev-dumpxml scsi_host16' provides:

  <device>
    <name>scsi_host16</name>
    <path>/sys/devices/pci0000:00/0000:00:04.0/0000:10:00.0/host3/vport-3:0-11/host16</path>
    <parent>scsi_host3</parent>
    <capability type='scsi_host'>
      <host>16</host>
      <unique_id>13</unique_id>
      <capability type='fc_host'>
        <wwnn>5001a4aaf3ca174b</wwnn>
        <wwpn>5001a4a77192b864</wwpn>
...

The patch also adjusts the description of the storage pool to describe the
restrictions.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
      42a021c1
    • J
      storage: Check for valid fc_host parent at startup · 844c1d7e
      由 John Ferlan 提交于 
      https://bugzilla.redhat.com/show_bug.cgi?id=1160565

If a 'parent' attribute is provided for the fchost, then at startup
time check to ensure it is a vport capable scsi_host. If the parent
is not vport capable, then disallow the startup. The following is the
expected results:

error: Failed to start pool fc_pool
error: XML error: parent 'scsi_host2' specified for vHBA is not vport capable

where the XML for the fc_pool is:

    <pool type='scsi'>
      <name>fc_pool</name>
      <source>
        <adapter type='fc_host' parent='scsi_host2' wwnn='5001a4aaf3ca174b' wwpn='5001a4a77192b864'/>
      </source>
...

and 'scsi_host2' is not vport capable.

Providing an incorrect parent and a correct wwnn/wwpn could lead to
failures at shutdown (deleteVport) where the assumption is the parent
is for the fchost.

NOTE: If the provided wwnn/wwpn doesn't resolve to an existing scsi_host,
      then we will be creating one with code (virManageVport) which
      assumes the parent is vport capable.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
      844c1d7e
    • M
      qemu: Resolve Coverity DEADCODE. · 6c1347ec
      由 Matthias Gatto 提交于 
      reported here: http://www.redhat.com/archives/libvir-list/2014-November/msg00327.html

I could have just remove bool supportMaxOptions variable, but
if I had do this, we could not check anymore if the nparams variable is
superior to QEMU_NB_BLOCK_IO_TUNE_PARAM_MAX.

v2: change following this proposal:
http://www.redhat.com/archives/libvir-list/2014-November/msg00379.html
      6c1347ec
    • M
      qemu: Fix copy_paste_error in qemuBuildDriveStr. · 5fb007b0
      由 Matthias Gatto 提交于 
      Fix for this: http://www.redhat.com/archives/libvir-list/2014-November/msg00324.htmlSigned-off-by: NMatthias Gatto <matthias.gatto@outscale.com>
      5fb007b0