- 07 5月, 2011 29 次提交
-
-
由 Daniel P. Berrange 提交于
Stop storing the generated files for the remote protocol client and server in source control. The generated files will still be included in the result of 'make dist' to avoid end-users needing to generate the files Signed-off-by: NEric Blake <eblake@redhat.com> Unfortunately, this means that the strings marked for translation in generated files are not picked up by gnulib's syntax-check, I'm working on fixing that in gnulib. * .gitignore, cfg.mk, po/POTFILES.in: Reflect deletion.
-
由 Daniel P. Berrange 提交于
Always generate the rpc files, and require rpcgen during bootstrap. * daemon/Makefile.am: Removed generated files with maintainer-clean target * src/Makefile.am: Removed generated files with maintainer-clean target. Always run 'rpcgen' if generated files are missing
-
由 Eric Blake 提交于
In preparation for removing generated files, it is necessary to tell automake that the generated files must be distributed but not directly compiled (since they are included into the body of a larger .c file that is compiled). Hence, even though these files are code and not headers in the strict sense of the word, it is easier to rename them to .h for automake's sake. * daemon/remote_client_bodies.c: Rename to .h. * daemon/qemu_client_bodies.c: Likewise. * src/remote/remote_client_bodies.c: Likewise. * src/remote/qemu_client_bodies.c: Likewise. * daemon/Makefile.am (remote_dispatch_bodies.c) (qemu_dispatch_bodies.c): Rename to .h. (remote.c, EXTRA_DIST): Reflect rename. * daemon/remote.c: Likewise. * daemon/remote_generator.pl: Likewise. * src/Makefile.am (remote/remote_driver.c): Likewise. * src/remote/remote_driver.c: Likewise. * po/POTFILES.in: Likewise. * cfg.mk (exclude_file_name_regexp--sc_require_config_h) (exclude_file_name_regexp--sc_require_config_h_first) (exclude_file_name_regexp--sc_prohibit_empty_lines_at_EOF): Likewise.
-
由 Matthias Bolte 提交于
This adds length checks to all affected functions.
-
由 Matthias Bolte 提交于
-
由 Matthias Bolte 提交于
Add generic versions of the open and close functions and call them.
-
由 Matthias Bolte 提交于
-
由 Matthias Bolte 提交于
-
由 Matthias Bolte 提交于
-
由 Matthias Bolte 提交于
-
由 Matthias Bolte 提交于
Rename remoteSecretListSecrets to remoteListSecrets to match the normal naming pattern.
-
由 Matthias Bolte 提交于
-
由 Matthias Bolte 提交于
Once again rename members in the XDR definitions to avoid special case code in the generator.
-
由 Matthias Bolte 提交于
-
由 Matthias Bolte 提交于
They require additional special cases.
-
由 Matthias Bolte 提交于
-
由 Matthias Bolte 提交于
-
由 Matthias Bolte 提交于
Avoids special case handling in the remote generator.
-
由 Matthias Bolte 提交于
-
由 Matthias Bolte 提交于
This covers functions that return single wrapped objects and don't involve complexer code in the body.
-
由 Matthias Bolte 提交于
-
由 Matthias Bolte 提交于
Again this will simplify the generator, due to less special case handling.
-
由 Matthias Bolte 提交于
This simplifies the remote protocol code generator. Also rename 'ret' to 'result' to resolve a naming conflict in the generator.
-
由 Matthias Bolte 提交于
This patch just covers the simple functions without explicit return values. There is more to be handled. The generator collects the members of the XDR argument structs and uses this information to generate the function bodies. Exclude the generated files from offending syntax-checks. Suggested by Richard W.M. Jones
-
由 Matthias Bolte 提交于
No functional change included, just a whitespace change.
-
由 Markus Groß 提交于
Creating a domU on a freshly booted dom0 does not work, because the libxl driver does not allocate memory for the domU. After creating a domain with xl libvirt is able to create domains too. This patch reserves enough memory for the domU first.
-
由 Eric Blake 提交于
The rule of thumb is that any file generated by config.status is a) reproducible by any user, b) dependent on configure options. Therefore, it is inappropriate to include such generated files in the tarball (for proof, Makefile is generated from Makefile.in; the former is not in the tarball while the latter is). * Makefile.am (EXTRA_DIST): Remove files covered by AC_OUTPUT.
-
由 Doug Goldstein 提交于
Instead of calling stat(), check that we'll actually be able to access and read the file. Signed-off-by: NDoug Goldstein <cardoe@gentoo.org>
-
由 Eric Blake 提交于
HACKING already mentions that comparisons against literal 'true' are unsafe; for consistency, also shorten comparisons against 'false'. * src/conf/domain_conf.c (virDomainNetDefParseXML): Simplify. * src/nwfilter/nwfilter_gentech_driver.c (virNWFilterDomainFWUpdateCB): Likewise. * tools/virsh.c (cmdVolDownload, vshCommandRun, vshPrintExtra): Likewise.
-
- 06 5月, 2011 11 次提交
-
-
由 Michal Privoznik 提交于
Users often edit XML file stored in configuration directory thinking of modifying a domain/network/pool/etc. Thus it is wise to let them know they are using the wrong way and give them hint.
-
由 Daniel P. Berrange 提交于
When setting up a FIFO for QEMU, it allows either a pair of fifos used unidirectionally, or a single fifo used bidirectionally. Look for the bidirectional fifo first when labelling since that is more useful * src/security/security_dac.c, src/security/security_selinux.c: Fix fifo handling
-
由 Daniel P. Berrange 提交于
As well as taint warnings going to the main libvirt log, add taint warnings to the per-domain logfile Domain id=3 is tainted: high-privileges Domain id=3 is tainted: disk-probing Domain id=3 is tainted: shell-scripts Domain id=3 is tainted: custom-monitor * src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: Enhance qemuDomainTaint to also log to the domain logfile * src/qemu/qemu_driver.c: Pass -1 for logFD to taint methods to auto-append to logfile * src/qemu/qemu_process.c: Pass open logFD at startup for taint methods
-
由 Daniel P. Berrange 提交于
The qemuDomainAppendLog method allows writing a formatted string to the end of the domain logfile, optionally opening it if needed. * src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: Add qemuDomainAppendLog
-
由 Daniel P. Berrange 提交于
Move the qemuProcessLogReadFD and qemuProcessLogFD methods into qemu_domain.c, renaming them to qemuDomainCreateLog and qemuDomainOpenLog. * src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: Add qemuDomainCreateLog and qemuDomainOpenLog. * src/qemu/qemu_process.c: Remove qemuProcessLogFD and qemuProcessLogReadFD
-
由 Daniel P. Berrange 提交于
Wire up logging of VM tainting to the QEMU driver - If running QEMU as root user/group or without capabilities being cleared - If passing custom QEMU command line args - If issuing custom QEMU monitor commands - If using a network interface config with an associated shell script - If using a disk config relying on format probing The warnings, per-VM appear in the main libvirtd logs 11:56:17.571: 10832: warning : qemuDomainObjTaint:712 : Domain id=1 name='l2' uuid=c7a3edbd-edaf-9455-926a-d65c16db1802 is tainted: high-privileges 11:56:17.571: 10832: warning : qemuDomainObjTaint:712 : Domain id=1 name='l2' uuid=c7a3edbd-edaf-9455-926a-d65c16db1802 is tainted: disk-probing The taint flags are reset when the VM is stopped. * src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: Helper APIs for logging taint warnings * src/qemu/qemu_driver.c: Log tainting with custom QEMU monitor commands and disk/net hotplug with unsupported configs * src/qemu/qemu_process.c: Log tainting at startup based on unsupported configs
-
由 Daniel P. Berrange 提交于
Some configuration setups for guests are allowed, but strongly discouraged and unsupportable in production systems. Introduce a concept of 'tainting' to virDomainObjPtr to allow such setups to be identified. Drivers can then log warnings at suitable times * src/conf/domain_conf.c, src/conf/domain_conf.h: Declare taint flags and add parsing/formatting of domain status XML
-
由 Doug Goldstein 提交于
Print the name of the CA cert, certificate, and key file that resulted in the failure so that the user has an idea what to troubleshoot. Signed-off-by: NDoug Goldstein <cardoe@gentoo.org>
-
由 Eric Blake 提交于
Easier to maintain, and no longer an arbitrary line length limit. * tools/virsh.c (vshOutputLogFile): Replace snprintf with virBuffer.
-
由 Eric Blake 提交于
Match the fact that we have virAsprintf and virVasprintf. * src/util/buf.h (virBufferVasprintf): New prototype. * src/util/buf.c (virBufferAsprintf): Move guts... (virBufferVasprintf): ...to new function. * src/libvirt_private.syms (buf.h): Export it. * bootstrap.conf (gnulib_modules): Add stdarg, for va_copy.
-
由 Eric Blake 提交于
We already have virAsprintf, so picking a similar name helps for seeing a similar purpose. Furthermore, the prefix V before printf generally implies 'va_list', even though this variant was '...', and the old name got in the way of adding a new va_list version. global rename performed with: $ git grep -l virBufferVSprintf \ | xargs -L1 sed -i 's/virBufferVSprintf/virBufferAsprintf/g' then revert the changes in ChangeLog-old.
-