This reverts commit ae09988e.

Since commit id '71ce4759' has been reverted, this one is no
longer necessary.

This reverts commit 71ce4759.

Since commit id 'a41c00b4' has been reverted, this no longer is
necessary

This reverts commit a41c00b4.

After much testing and upstream discussion this has been deemed to be
the incorrect operation since it means we no longer have any guarantee
about which resource controllers the QEMU processes in general are in.

There is no need to deny writes on a readonly mount: write still
won't be accepted, even if the user remounts the folder as RW in
the guest as qemu sets the 9p mount as ro.

This deny rule was leading to problems for example with readonly /:
The qemu process had to write to a bunch of files in / like logs,
sockets, etc. This deny rule was also preventing auditing of these
denials, making it harder to debug.

Commit id '7bf3198d' neglected to initialize deflate leading to a
possibility if model allocation/checks fail, then the VIR_FREE(deflate)
would be erroneous. Noted by Jan Tomko.

In 50078cfb I've tried to fix distcheck but accidentally
broke rpm build. The problem is that rpm build not only sets
DESTDIR but also passes plugindir path. This results in double
DESTDIR being in the plugin path, Drop one.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Mention that we run a command in that namespace

Even though the Makefile has WITH_WIRESHARK guards, the _SOURCES
variables are still processed when adding bits to the dist archive.

plugin.c is a generated file that is only built when wireshark is
enabled and it shouldn't be distributed, so use 'nodist'

So, you try to start a domain, but before we even get to the part
where chardev part of qemu command line is generated (and
possibly missing path to unix sockets is made up) an error occurs
which results in calling qemuProcessStop. This will then try to
clean up the mess and possibly ends up calling unlink(NULL).

==8085== Thread 3:
==8085== Syscall param unlink(pathname) points to unaddressable byte(s)
==8085==    at 0xA85EA57: unlink (in /lib64/libc-2.21.so)
==8085==    by 0x213D3C24: qemuProcessCleanupChardevDevice (qemu_process.c:2866)
==8085==    by 0x558D6B1: virDomainChrDefForeach (domain_conf.c:22924)
==8085==    by 0x213DA9AE: qemuProcessStop (qemu_process.c:5326)
==8085==    by 0x213DA2F2: qemuProcessStart (qemu_process.c:5190)
==8085==    by 0x2142957F: qemuDomainObjStart (qemu_driver.c:7396)
==8085==    by 0x214297DB: qemuDomainCreateWithFlags (qemu_driver.c:7450)
==8085==    by 0x21429842: qemuDomainCreate (qemu_driver.c:7468)
==8085==    by 0x5611B95: virDomainCreate (libvirt-domain.c:6753)
==8085==    by 0x125D9A: remoteDispatchDomainCreate (remote_dispatch.h:3613)
==8085==    by 0x125CB7: remoteDispatchDomainCreateHelper (remote_dispatch.h:3589)
==8085==    by 0x568BF41: virNetServerProgramDispatchCall (virnetserverprogram.c:437)
==8085==  Address 0x0 is not stack'd, malloc'd or (recently) free'd
==8085==
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Commit ec63000a missed checking the return value of regcomp(),
which coverity promptly identified.

Like everything we install, it should be prefixed with DESTDIR.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Commmit fd2e3c4c used the domctl version 8 structure for version 9
in the xen_getdomaininfolist union, resulting in insufficient buffer
size (and subsequent memory corruption) for the GETDOMAININFOLIST
ioctl.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

- Don't double check for expectName
- actual is always non-NULL by this point, so don't check it either

Just handle it all in tools/Makefile.am. I verified the generated output
looks similar to the pre patch output, but I didn't test it.

So after da176bf6 and friend we have switched to $(wildcard
some/path/*.xml) instead of enumerating the files explicitly.
This is nice, however it makes distcheck build from VPATH fail.
The reason is that it's is not obvious to what does the wildcard
refer to: srcdir or builddir?
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Autodeflate can be enabled/disabled for memballon device
of model 'virtio'.

xml:
<devices>
  <memballoon model='virtio' autodeflate='on'/>
</devices>

qemu:
qemu -device virtio-balloon-pci,...,deflate-on-oom=on

Autodeflate cannot be enabled/disabled for running domain.

Add appropriate capability check and new virQEMUCaps flag for the new
virtio balloon feature. QEMU commit with the complete feature description:
http://git.qemu.org/?p=qemu.git;a=commit;h=e3816255bf4b6377bb405331e2ee0dc14d841b80

Excessive memory balloon inflation can cause invocation of OOM-killer,
when Linux is under severe memory pressure. QEMU memballoon device
has a feature to release some memory at the last moment before some
process will be get killed by OOM-killer.

Introduce a new optional balloon device attribute 'autodeflate' to
enable or disable this feature.

On every socket connect(2) attempt we were re-launching session
libvirtd, up to 100 times in 5 seconds.

This understandably caused some weird load races and intermittent
qemu:///session startup failures

https://bugzilla.redhat.com/show_bug.cgi?id=1271183

When we autolaunch libvirtd for session URIs, we spin in a retry
loop waiting for the daemon to start and the connect(2) to succeed.

However if we exceed the retry count, we don't explicitly raise an
error, which can yield a slew of different error messages elsewhere
in the code.

Explicitly raise the last connect(2) failure if we run out of retries.

- Add some debugging
- Make the loop dependent only on retries
- Make it explicit that connect(2) success exits the loop
- Invert the error checking logic

Commit 2b6f6ad6 introduced the virxdrdefs.h header with
common definitions to be included in the protocol files,
but logging/log_protocol.x was missed, so add it there as well.

Hopefully this fixes build on OS X.

When we are receiving data in smaller chunks it might happen that
virNetServerClientDispatchRead() will be called multiple times.  And as
that happens, if it is a message that also transfer headers, we decode
the number of them every single time and, unfortunately, also allocate
the memory for them.  That causes a leak, in the best scenario.

Best viewed with '-w'.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically.  Note that not all
'{.name = "interface",' entries are replaced, just those that have the
common .help string of "interface name or MAC address".
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically.  Note that not all
'{.name = "network",' entries are replaced, just those that have the
common .help string of "network name or uuid".
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Rather than continually cut-n-paste the strings into each command,
create common macros to be used generically.  Replace the more commonly
used "vol" option with a macro. This also adjusts 2 commands that
didn't have the correct helpstr - 'vol-create-from' and 'vol-clone'.
Both are described in the man page as taking vol, path, or key and
the code uses the virshCommandOptVol instead of virshCommandOptVolBy.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr for the less common help string for each
command option.  Note that only file options using "OT_DATA" and
"OFLAG_REQ" will be replace - others are left as is.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr which for many options in virsh-domain.c
is simply "affect current domain". So, create a second macro within that
file in order to define the more common use as a revector to the
common macro with the common _helpstr.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr which for many options in virsh-domain.c
is simply "affect running domain". So, create a second macro within that
file in order to define the more common use as a revector to the
common macro with the common _helpstr.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr which for many options in virsh-domain.c
is simply "affect next boot". So, create a second macro within that
file in order to define the more common use as a revector to the
common macro with the common _helpstr.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically.  Note that not all
'{.name = "persistent",' entries are replaced, just those that have the
common .help string of "make live change persistent".

Non replaced instances are unique to the command.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr which will be used to pass the translatable
helpstr since not all domain options can take the same string.

The majority of the options take 'N_("domain name, id or uuid")', so
create a separate macro with a _FULL suffix while those that do not
take the same string will use the VIRSH_COMMON_OPT_DOMAIN macro.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

The macro is slightly adjusted to add an argument "_helpstr". This
will be passed as a translation macro string since other uses of the
option may not have the same exact help string (such as is the case
when the uuid is not suppliable for create commands).

In virsh-pool.c - we'll create a singular VIRSH_COMMON_OPT_POOL_FULL
in order to pass along the 'N_("pool name or uuid")'

In virsh-volume.c there will be a VIRSH_COMMON_OPT_POOL_FULL and a
VIRSH_COMMON_OPT_POOL_NAME, which passes 'N_("pool name")' for
the commands that can only pass a name. There will also be a
VIRSH_COMMON_OPT_POOL_OPTIONAL which is used for the command
options which use OT_STRING and don't require the --pool argument.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Commit id's 'cf793b00', 'e178688f', 'f9a6110f', '5372d49b', and 'e1937354'
added new VSH_POOL_ macros; however, it was pointed out after push that
commit id '834c5720' preferred use of VIRSH_ for the prefix over VSH_.

So this patch just changes the VSH_ to VIRSH_ and it changes the naming
format from VIRSH_<opt>_OPT_COMMON to VIRSH_COMMON_OPT_<opt>.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

 if instanceId is NULL

When virNetDevVPortProfileGetStatus() was called with instanceId =
NULL (which is the case for all DISASSOCIATE requests in 802.1Qbh) it
would log the following error:

   Could not find netlink response with expected parameters

even though the disassociate had been successfully completely. Then,
due to the fortunate coincidence of status having been initialized to
0 and then not changed when the "failure" was encountered, it would
still return a status of 0 (PORT_VDP_RESPONSE_SUCCESS), so the caller
would assume a successful operation.

This would result in a spurious log message though, and would fill in
LastErrorMessage, so that the API would return that error if it
happened during cleanup from some other error. That, in turn, would
lead to an incorrect supposition that the response to the port profile
disassociate was the cause of the failure.

During debugging, I noticed that the VF in question usually had *no
uuid* associated with it (big surprise)by the time the disassociate
completed, so the solution is *not* to send the previous instanceId
down.

This patch fixes virNetDevVPortProfileGetStatus() to only check the
VF's uuid in the status if it was given an instanceId to check against
when originally called. Otherwise it only checks that the particular
VF is present (it will be).

This does cause a slight difference in behavior - rather than
returning with status unchanged (and thus always 0) it will actually
get the IFLA_PORT_RESPONSE. This could lead to revelation of error
conditions we were previously ignoring. Or not. So far "not".

Use the VIR_TRISTATE_SWITCH_* enums appropriately.

No functional change.

Use virDomainDefAddUSBController() to add an EHCI1+UHCI1+UHCI2+UHCI3
controller set to newly defined Q35 domains that don't have any USB
controllers defined.

This new function will add a single controller of the given model,
except the case of ich9-usb-ehci1 (the master controller for a USB2
controller set) in which case a set of related controllers will be
added (EHCI1, UHCI1, UHCI2, UHCI3). These controllers will not be
given PCI addresses, but should be otherwise ready to use.

"-1" is allowed for controller model, and means "default for this
machinetype". This matches the existing practice in
qemuDomainDefPostParse(), which always adds the default controller
with model = -1, and relies on the commandline builder to set a model
(that is wrong, but will be fixed later).

We need a virDomainDefAddController() that doesn't check for an
existing controller at the same index (since USB2 controllers must be
added in sets of 4 that are all at the same index), so rather than
duplicating the code in virDomainDefMaybeAddController(), split it
into two functions, in the process eliminating existing duplicated
code that loops through the controller list by calling
virDomainControllerFind(), which does the same thing).