Our existing virDomainBlockResize takes an unsigned long long
argument; if that command is later taught a DELTA and SHRINK flag,
we cannot change its type without breaking API (but at least such
a change would be ABI compatible).  Meanwhile, the only time a
negative size makes sense is if both DELTA and SHRINK are used
together, but if we keep the argument unsigned, applications can
pass the positive delta amount by which they would like to shrink
the system, and have the flags imply the negative value.  So,
since this API has not yet been released, and in the interest of
consistency with existing API, we swap virStorageVolResize to
always pass an unsigned value.

* include/libvirt/libvirt.h.in (virStorageVolResize): Use unsigned
argument.
* src/libvirt.c (virStorageVolResize): Likewise.
* src/driver.h (virDrvStorageVolUpload): Adjust clients.
* src/remote/remote_protocol.x (remote_storage_vol_resize_args):
Likewise.
* src/remote_protocol-structs: Regenerate.
Suggested by Daniel P. Berrange.

Unlike other users of virTypedParameter with RPC, this interface
can return zero-filled entries because the interface assumes
2 dimensional array. We compress these entries out from the
server when generating the over-the-wire contents, then reconstitute
them in the client.
Signed-off-by: NEric Blake <eblake@redhat.com>

This API allows a domain to be put into one of S# ACPI states.
Currently, S3 and S4 are supported. These states are shared
with virNodeSuspendForDuration.
However, for now we don't support any duration other than zero.
The same apply for flags.

Autogeneration saves the day.
Signed-off-by: NEric Blake <eblake@redhat.com>

Currently, we support only filling a volume with zeroes on wiping.
However, it is not enough as data might still be readable by
experienced and equipped attacker. Many technical papers have been
written, therefore we should support other wiping algorithms.

Add a new API virDomainShutdownFlags and define:

    VIR_DOMAIN_SHUTDOWN_DEFAULT        = 0,
    VIR_DOMAIN_SHUTDOWN_ACPI_POWER_BTN = (1 << 0),
    VIR_DOMAIN_SHUTDOWN_GUEST_AGENT    = (1 << 1),

Also define some flags for the reboot API

    VIR_DOMAIN_REBOOT_DEFAULT        = 0,
    VIR_DOMAIN_REBOOT_ACPI_POWER_BTN = (1 << 0),
    VIR_DOMAIN_REBOOT_GUEST_AGENT    = (1 << 1),

Although these two APIs currently have the same flags, using
separate enums allows them to expand separately in the future.

Add stub impls of the new API for all existing drivers

* daemon/remote.c: implement the server side support
* src/remote/remote_driver.c: implement the client side support
* src/remote/remote_protocol.x: definitions for the new entry points
* src/remote_protocol-structs: structure definitions

Support Block I/O Throttle setting and query to remote driver.
Signed-off-by: NLei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

* src/remote_protocol-structs: Use correct RPC name.

Pushed under build failure rule.

Implement the remote protocol for virNodeSuspendForDuration() API.

Send and receive string typed parameters across RPC.  This also
completes the back-compat mentioned in the previous patch - the
only time we have an older client talking to a newer server is
if RPC is in use, so filtering out strings during RPC prevents
returning an unknown type to the older client.

* src/remote/remote_protocol.x (remote_typed_param_value): Add
another union value.
* daemon/remote.c (remoteDeserializeTypedParameters): Handle
strings on rpc.
(remoteSerializeTypedParameters): Likewise; plus filter out
strings when replying to older clients.  Adjust callers.
* src/remote/remote_driver.c (remoteFreeTypedParameters)
(remoteSerializeTypedParameters)
(remoteDeserializeTypedParameters): Handle strings on rpc.
* src/rpc/gendispatch.pl: Properly clean up typed arrays.
* src/remote_protocol-structs: Update.
Based on an initial patch by Hu Tao, with feedback from
Daniel P. Berrange.
Signed-off-by: NEric Blake <eblake@redhat.com>

Since it needs to access file descriptors passed in the msg,
the RPC driver for virDomainOpenGraphics needs to be manually
implemented.

* daemon/remote.c: RPC server dispatcher
* src/remote/remote_driver.c: RPC client dispatcher
* src/remote/remote_protocol.x: Define protocol

* src/remote_protocol-structs: Add new event

If a disk source gets dropped because it is not accessible,
mgmt application might want to be informed about this. Therefore
we need to emit an event. The event presented in this patch
is however a bit superset of what written above. The reason is simple:
an intention to be easily expanded, e.g. on 'user ejected disk
in guest' events. Therefore, callback gets source string and disk alias
(which should be unique among a domain) and reason (an integer);

Very mechanical.  I'm so glad we've automated the generation of things,
compared to what it was in 0.8.x days, where this would be much longer.

* src/remote/remote_protocol.x
(REMOTE_PROC_DOMAIN_SNAPSHOT_NUM_CHILDREN)
(REMOTE_PROC_DOMAIN_SNAPSHOT_LIST_CHILDREN_NAMES): New rpcs.
(remote_domain_snapshot_num_children_args)
(remote_domain_snapshot_num_children_ret)
(remote_domain_snapshot_list_children_names_args)
(remote_domain_snapshot_list_children_names_ret): New structs.
* src/remote/remote_driver.c (remote_driver): Use it.
* src/remote_protocol-structs: Update.

Signed-off-by: NXu He Jie <xuhj@linux.vnet.ibm.com>

Mostly straight-forward, although this is the first API that
returns a new snapshot based on a snapshot rather than a domain.

* src/remote/remote_protocol.x
(REMOTE_PROC_DOMAIN_SNAPSHOT_GET_PARENT): New rpc.
(remote_domain_snapshot_get_parent_args)
(remote_domain_snapshot_get_parent_ret): New structs.
* src/rpc/gendispatch.pl: Adjust generator.
* src/remote/remote_driver.c (remote_driver): Use it.
* src/remote_protocol-structs: Update.

Patch 79cf07af missed one instance of "devname" in source for RPC code
generator.

Problem introduced by commit b12354be.

* src/remote_protocol-structs: Remove spurious blank line.

Includes impl of python binding since the generator was not
able to cope.

Note: Requires gendispatch.pl patch from Matthias Bolte

https://www.redhat.com/archives/libvir-list/2011-August/msg01367.html

When an operation started by virDomainBlockPull completes (either with
success or with failure), raise an event to indicate the final status.
This API allow users to avoid polling on virDomainGetBlockJobInfo if
they would prefer to use an event mechanism.

* daemon/remote.c: Dispatch events to client
* include/libvirt/libvirt.h.in: Define event ID and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
  src/libvirt_private.syms: Extend API to handle the new event
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
  for block_stream completion and emit a libvirt block pull event
* src/remote/remote_driver.c: Receive and dispatch events to application
* src/remote/remote_protocol.x: Wire protocol definition for the event
* src/remote_protocol-structs: structure definitions for protocol verification
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c: Watch for BLOCK_STREAM_COMPLETED event
  from QEMU monitor

The generator can handle everything except virDomainGetBlockJobInfo().

* src/remote/remote_protocol.x: provide defines for the new entry points
* src/remote/remote_driver.c daemon/remote.c: implement the client and
  server side for virDomainGetBlockJobInfo.
* src/remote_protocol-structs: structure definitions for protocol verification
* src/rpc/gendispatch.pl: Permit some unsigned long parameters

* src/remote/remote_driver.c (remote_driver): Add new callbacks.
* src/remote/remote_protocol.x (remote_procedure): New RPCs.
(remote_domain_save_image_get_xml_desc_args)
(remote_domain_save_image_get_xml_desc_ret)
(remote_domain_save_image_define_xml_args): New structs.
* src/remote_protocol-structs: Update.

* src/remote/remote_driver.c (remote_driver): Add new callbacks.
* src/remote/remote_protocol.x (remote_procedure): New RPCs.
(remote_domain_save_flags_args, remote_domain_restore_flags_args):
New structs.
* src/remote_protocol-structs: Update.

* src/libxl/libxl_driver.c (libxlDomainUndefineFlags): Use correct
enum value.
* src/remote_protocol-structs (remote_procedure): Likewise.

As long as we guarantee RPC struct layout stability, we might as
well also guarantee RPC enum value constancy.

* src/Makefile.am (r1, r2, PDWTAGS): Adjust rule to pick up named
and anonymous enums.
* src/remote_protocol-structs: Add enum values.
* src/qemu_protocol-structs: Likewise.
* src/virnetprotocol-structs: Likewise.

Now that the public APIs always use unsigned flags, the internal
driver callbacks might as well do likewise.

* src/driver.h (vrDrvOpen, virDrvDomainCoreDump)
(virDrvDomainGetXMLDesc, virDrvNetworkGetXMLDesc)
(virDrvNWFilterGetXMLDesc): Update type.
* src/remote/remote_protocol.x (remote_open_args)
(remote_domain_core_dump_args, remote_domain_get_xml_desc_args)
(remote_network_get_xml_desc_args)
(remote_nwfilter_get_xml_desc_args): Likewise.
* src/test/test_driver.c: Update clients.
* src/remote/remote_driver.c: Likewise.
* src/xen/xen_hypervisor.c: Likewise.
* src/xen/xen_hypervisor.h: Likewise.
* src/xen/xen_driver.c: Likewise.
* src/xen/xend_internal.c: Likewise.
* src/xen/xend_internal.h: Likewise.
* src/xen/xm_internal.c: Likewise.
* src/xen/xm_internal.h: Likewise.
* src/xen/xs_internal.c: Likewise.
* src/xen/xs_internal.h: Likewise.
* src/xen/xen_inotify.c: Likewise.
* src/xen/xen_inotify.h: Likewise.
* src/phyp/phyp_driver.c: Likewise.
* src/openvz/openvz_driver.c: Likewise.
* src/vmware/vmware_driver.c: Likewise.
* src/vbox/vbox_driver.c: Likewise.
* src/vbox/vbox_tmpl.c: Likewise.
* src/xenapi/xenapi_driver.c: Likewise.
* src/esx/esx_driver.c: Likewise.
* src/esx/esx_interface_driver.c: Likewise.
* src/esx/esx_network_driver.c: Likewise.
* src/esx/esx_storage_driver.c: Likewise.
* src/esx/esx_device_monitor.c: Likewise.
* src/esx/esx_secret_driver.c: Likewise.
* src/esx/esx_nwfilter_driver.c: Likewise.
* src/interface/netcf_driver.c: Likewise.
* src/nwfilter/nwfilter_driver.c: Likewise.
* src/libxl/libxl_driver.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/lxc/lxc_driver.c: Likewise.
* src/uml/uml_driver.c: Likewise.
* src/network/bridge_driver.c: Likewise.
* src/secret/secret_driver.c: Likewise.
* src/storage/storage_driver.c: Likewise.
* src/node_device/node_device_hal.c: Likewise.
* src/node_device/node_device_udev.c: Likewise.
* src/remote_protocol-structs: Likewise.

Problem introduced in commit 6818cf86.

* src/remote_protocol-structs: Delete unused struct.

We already have a public virDomainPinVcpu, which implies that
Pin and Vcpu are treated as separate words.  Unreleased commit
e261987c introduced virDomainGetVcpupinInfo as the first public
API that used Vcpupin, although we had prior internal uses of
that spelling.  For consistency, change the spelling to be two
words everywhere, regardless of whether pin comes first or last.

* daemon/remote.c: Treat vcpu and pin as separate words.
* include/libvirt/libvirt.h.in: Likewise.
* src/conf/domain_conf.c: Likewise.
* src/conf/domain_conf.h: Likewise.
* src/driver.h: Likewise.
* src/libvirt.c: Likewise.
* src/libvirt_private.syms: Likewise.
* src/libvirt_public.syms: Likewise.
* src/libxl/libxl_driver.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/remote/remote_driver.c: Likewise.
* src/xen/xend_internal.c: Likewise.
* tools/virsh.c: Likewise.
* src/remote/remote_protocol.x: Likewise.
* src/remote_protocol-structs: Likewise.
Suggested by Matthias Bolte.

This patch implements the remote protocol to address the new API
(virDomainGetVcpupinInfo).
Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>

This reverts commit d1693bb1.

Conflicts:

	daemon/remote.c
	src/remote/remote_driver.c
	src/remote/remote_protocol.x

This reverts commit 12cd77a0.

Conflicts:

	python/libvirt-override-virConnect.py
	python/libvirt-override.c
	src/remote/remote_protocol.x

When an operation started by virDomainBlockPullAll completes (either with
success or with failure), raise an event to indicate the final status.  This
allows an API user to avoid polling on virDomainBlockPullInfo if they would
prefer to use the event mechanism.

* daemon/remote.c: Dispatch events to client
* include/libvirt/libvirt.h.in: Define event ID and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
  src/libvirt_private.syms: Extend API to handle the new event
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
  for block_stream completion and emit a libvirt block pull event
* src/remote/remote_driver.c: Receive and dispatch events to application
* src/remote/remote_protocol.x: Wire protocol definition for the event
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c: Watch for BLOCK_STREAM_COMPLETED event
  from QEMU monitor
Signed-off-by: NAdam Litke <agl@us.ibm.com>