Since we are adding a new "per-hypervisor" protocol, we
make it so that the qemu remote protocol uses a new
PROTOCOL and PROGRAM number.  This allows us to easily
distinguish it from the normal REMOTE protocol.

This necessitates changing the proc in remote_message_header
from a "remote_procedure" to an "unsigned", which should
be the same size (and thus preserve the on-wire protocol).

Changes since v1:
 - Fixed up a couple of script problems in remote_generate_stubs.pl
 - Switch an int flag to a bool in dispatch.c

Changes since v2:
 - None

Changes since v3:
 - Change unsigned proc to signed proc, to conform to spec
Signed-off-by: NChris Lalancette <clalance@redhat.com>

Add the library entry point for the new virDomainQemuMonitorCommand()
entry point.  Because this is not part of the "normal" libvirt API,
it gets its own header file, library file, and will eventually
get its own over-the-wire protocol later in the series.

Changes since v1:
 - Go back to using the virDriver table for qemuDomainMonitorCommand, due to
   linking issues
 - Added versioning information to the libvirt-qemu.so

Changes since v2:
 - None

Changes since v3:
 - Add LGPL header to libvirt-qemu.c
 - Make virLibConnError and virLibDomainError macros instead of function calls

Changes since v4:
 - Move exported symbols to libvirt_qemu.syms
Signed-off-by: NChris Lalancette <clalance@redhat.com>

The remote driver is using the wrong privateData field in
a couple of functions. THis is harmless for stateful
drivers like QEMU/UML/LXC, but will crash with Xen

* src/remote/remote_driver.c: Fix use of privateData field

Define the wire format for the new virDomainCreateWithFlags
API, and implement client and server side of marshaling code.

* daemon/remote.c (remoteDispatchDomainCreateWithFlags): Add
server side dispatch for virDomainCreateWithFlags.
* src/remote/remote_driver.c (remoteDomainCreateWithFlags)
(remote_driver): Client side serialization.
* src/remote/remote_protocol.x
(remote_domain_create_with_flags_args)
(remote_domain_create_with_flags_ret)
(REMOTE_PROC_DOMAIN_CREATE_WITH_FLAGS): Define wire format.
* daemon/remote_dispatch_args.h: Regenerate.
* daemon/remote_dispatch_prototypes.h: Likewise.
* daemon/remote_dispatch_table.h: Likewise.
* src/remote/remote_protocol.c: Likewise.
* src/remote/remote_protocol.h: Likewise.
* src/remote_protocol-structs: Likewise.

Persistent domain creation needs the same features as transient
domains, but virDomainCreate lacks the flags argument present in
virDomainCreateXML.  virDomainCreateFlags is already claimed as
a public enum, so we have to break convention and expose
virDomainCreateWithFlags.

* include/libvirt/libvirt.h.in (virDomainCreateWithFlags): Add.
* src/driver.h (virDrvDomainCreateWithFlags): Internal API.
* src/libvirt.c (virDomainCreateWithFlags): Glue public API to
driver API.
* src/libvirt_public.syms (LIBVIRT_0.8.2): Expose public API.
* src/esx/esx_driver.c (esxDriver): Add stub for driver.
* src/lxc/lxc_driver.c (lxcDriver): Likewise.
* src/opennebula/one_driver.c (oneDriver): Likewise.
* src/openvz/openvz_driver.c (openvzDriver): Likewise.
* src/phyp/phyp_driver.c (phypDriver): Likewise.
* src/qemu/qemu_driver.c (qemuDriver): Likewise.
* src/remote/remote_driver.c (remote_driver): Likewise.
* src/test/test_driver.c (testDriver): Likewise.
* src/uml/uml_driver.c (umlDriver): Likewise.
* src/vbox/vbox_tmpl.c (Driver): Likewise.
* src/xen/xen_driver.c (xenUnifiedDriver): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDriver): Likewise.

First calling REMOTE_PROC_CLOSE and then removing watches might lead to
a hang as HANGUP event can be triggered before the watches are actually
removed but after virConnectPtr is already freed. As a result of that
remoteDomainEventFired() would try to lock uninitialized mutex, which
would hang for ever.

* .gnulib: Update to latest.
* bootstrap.conf (gnulib_modules): Import netdb.
* src/esx/esx_util.c (AI_ADDRCONFIG): Rely on gnulib.
* src/remote/remote_driver.c (AI_ADDRCONFIG): Likewise.
* tools/virsh.c (WEXITSTATUS, O_SYNC): Likewise.

Allow debugging of GNUTLS interactions by setting

  LIBVIRT_GNUTLS_DEBUG=10 LIBVIRT_DEBUG=1 virsh

* src/remote/remote_driver.c: Use LIBVIRT_GNUTLS_DEBUG to
  enable gnutls debugging

Change 965466c1 added a new field to struct remote_error, which broke
the RPC protocol. Fortunately the new field is unused, so this change
simply removes it again.

* src/remote/remote_protocol.(c|h|x): Remove remote_nwfilter from struct
  remote_error

* configure.ac: Drop sys/wait.h check.
* src/libvirt.c (includes): Use header unconditionally.
* src/remote/remote_driver.c (includes): Likewise.
* src/storage/storage_backend.c (includes): Likewise.
* src/util/ebtables.c (includes): Likewise.
* src/util/hooks.c (includes): Likewise.
* src/util/iptables.c (includes): Likewise.
* src/util/util.c (includes): Likewise.

Gnulib can guarantee that pthread.h exists, but for now, it is a dummy
header with no support for most pthread_* functions.  Modify our
use of pthread to use function checks, rather than header checks,
to determine how much pthread support is present.

* bootstrap.conf (gnulib_modules): Add pthread.
* configure.ac: Drop all pthread.h checks.  Optimize function
checks.  Add check for pthread functions.
* src/Makefile.am (libvirt_lxc_LDADD): Ensure proper link.
* src/remote/remote_driver.c (remoteIOEventLoop): Depend on
pthread_sigmask, now that gnulib guarantees pthread.h.
* src/util/util.c (virFork): Likewise.
* src/util/threads.c (threads-pthread.c): Depend on
pthread_mutexattr_init, as a witness of full pthread support.
* src/util/threads.h (threads-pthread.h): Likewise.

This introduces a new event type

   VIR_DOMAIN_EVENT_ID_IO_ERROR_REASON

This event is the same as the previous VIR_DOMAIN_ID_IO_ERROR
event, but also includes a string describing the cause of
the event.

Thus there is a new callback definition for this event type

typedef void (*virConnectDomainEventIOErrorReasonCallback)(virConnectPtr conn,
                                                           virDomainPtr dom,
                                                           const char *srcPath,
                                                           const char *devAlias,
                                                           int action,
                                                           const char *reason,
                                                           void *opaque);

This is currently wired up to the QEMU block IO error events

* daemon/remote.c: Dispatch IO error events to client
* examples/domain-events/events-c/event-test.c: Watch for
  IO error events
* include/libvirt/libvirt.h.in: Define new IO error event ID
  and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
  src/libvirt_private.syms: Extend API to handle IO error events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
  for block IO errors and emit a libvirt IO error event
* src/remote/remote_driver.c: Receive and dispatch IO error
  events to application
* src/remote/remote_protocol.x: Wire protocol definition for
  IO error events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c: Watch for BLOCK_IO_ERROR event
  from QEMU monitor

* daemon/remote.c: Server side dispatcher
* daemon/remote_dispatch_args.h, daemon/remote_dispatch_prototypes.h,
  daemon/remote_dispatch_ret.h, daemon/remote_dispatch_table.h: Update
  with new API
* src/remote/remote_driver.c: Client side dispatcher
* src/remote/remote_protocol.c, src/remote/remote_protocol.h: Update
* src/remote/remote_protocol.x: Define new wire protocol

This defines the internal driver API and stubs out each driver

* src/driver.h: Define virDrvDomainGetBlockInfo signature
* src/libvirt.c, src/libvirt_public.syms: Glue public API to drivers
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
  src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
  src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
  src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Stub out driver

Cygwin's XDR implementation defines xdr_u_int64_t instead of
xdr_uint64_t and lacks IXDR_PUT_INT32/IXDR_GET_INT32.

Alter the IXDR_GET_LONG regex in rpcgen_fix.pl so it doesn't destroy
the #define IXDR_GET_INT32 IXDR_GET_LONG in remote_protocol.x.

Also fix the remote_protocol.h regex in rpcgen_fix.pl.

The user probably doesn't care what the gai error numbers are, as
much as what the failed conversion IP address was.

* src/remote/remote_driver.c (addrToString): Mention which address
could not be converted.
* daemon/remote.c (addrToString): Likewise.

According to GCC, ATTRIBUTE_UNUSED means that an attribute _might_
be unused, not _must_ be unused.  Therefore, it is easier to
blindly mark a variable, than to try and do preprocessor limiting
of when we know it is unused.

* src/remote/remote_driver.c (remoteAuthenticate): Mark attribute
as potentially unused.
Reported by Gustovo Morozowski.

Otherwise compiling with -Werror will fail.

* src/remote/remote_driver.c (remoteIO, remoteIOEventLoop): Report
failures on pipe used for wakeup.
Reported by Chris Lalancette.

Based on a warning from coverity.  The safe* functions
guarantee complete transactions on success, but don't guarantee
freedom from failure.

* src/util/util.h (saferead, safewrite, safezero): Add
ATTRIBUTE_RETURN_CHECK.
* src/remote/remote_driver.c (remoteIO, remoteIOEventLoop): Ignore
some failures.
(remoteIOReadBuffer): Adjust error messages on read failure.
* daemon/event.c (virEventHandleWakeup): Ignore read failure.

Signed-off-by: NChris Lalancette <clalance@redhat.com>

Signed-off-by: NChris Lalancette <clalance@redhat.com>

Also unify error/errorf to remoteError and update cfg.mk accordingly.

git grep found 12 of the former but 100 of the latter in src/.

* src/remote/remote_driver.c (initialise_gnutls): Rename...
(initialize_gnutls): ...to this.
(doRemoteOpen): Adjust caller.
* src/xen/xen_driver.c (xenUnifiedOpen): Adjust output string.
* src/util/network.c: Adjust comments.
Suggested by Matthias Bolte.

Signed-off-by: NChris Lalancette <clalance@redhat.com>

* src/remote/remote_protocol.x src/remote/remote_protocol.h
  src/remote/remote_protocol.c src/remote/remote_driver.c: add the entry
  points in the remote driver
* daemon/remote.c daemon/remote_dispatch_args.h
  daemon/remote_dispatch_prototypes.h daemon/remote_dispatch_table.h:
  and implement the daemon counterpart

virDomainManagedSave() is to be run on a running domain. Once the call
complete, as in virDomainSave() the domain is stopped upon completion,
but there is no restore counterpart as any order to start the domain
from the API would load the state from the managed file, similary if
the domain is autostarted when libvirtd starts.
Once a domain has restarted his managed save image is destroyed,
basically managed save image can only exist for a stopped domain,
for a running domain that would be by definition outdated data.

* include/libvirt/libvirt.h.in src/libvirt.c src/libvirt_public.syms:
  adds the new entry points virDomainManagedSave(),
  virDomainHasManagedSaveImage() and virDomainManagedSaveRemove()
* src/driver.h src/esx/esx_driver.c src/lxc/lxc_driver.c
  src/opennebula/one_driver.c  src/openvz/openvz_driver.c
  src/phyp/phyp_driver.c src/qemu/qemu_driver.c src/vbox/vbox_tmpl.c
  src/remote/remote_driver.c src/test/test_driver.c src/uml/uml_driver.c
  src/xen/xen_driver.c: add corresponding new internal drivers entry
  points

This patch adds the definition of the wire format for RPC calls
and implementation of the RPC client & server code
Signed-off-by: NStefan Berger <stefanb@us.ibm.com>

This defines the wire format for the new virDomainUpdateDeviceFlags()
API, and implements the server & client side of the marshalling code.

* daemon/remote.c: Server side dispatch for virDomainUpdateDeviceFlags
* src/remote/remote_driver.c: Client side serialization for
  virDomainUpdateDeviceFlags
* src/remote/remote_protocol.x: Define wire format for
  virDomainUpdateDeviceFlags
* daemon/remote_dispatch_args.h, daemon/remote_dispatch_prototypes.h,
  daemon/remote_dispatch_table.h, src/remote/remote_protocol.c,
  src/remote/remote_protocol.h: Re-generate code

The current virDomainAttachDevice API can be (ab)used to change
the media of an existing CDROM/Floppy device. Going forward there
will be more devices that can be configured on the fly and overloading
virDomainAttachDevice for this is not too pleasant. This patch adds
a new virDomainUpdateDeviceFlags() explicitly just for modifying
existing devices.

* include/libvirt/libvirt.h.in: Add virDomainUpdateDeviceFlags
* src/driver.h: Internal API for virDomainUpdateDeviceFlags
* src/libvirt.c, src/libvirt_public.syms: Glue public API to
  driver API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
  src/openvz/openvz_driver.c, src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
  src/remote/remote_driver.c, src/test/test_driver.c, src/uml/uml_driver.c,
  src/vbox/vbox_tmpl.c, src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Add
  stubs for new driver entry point

This introduces a new event type

   VIR_DOMAIN_EVENT_ID_GRAPHICS

The same event can be emitted in 3 scenarios

  typedef enum {
      VIR_DOMAIN_EVENT_GRAPHICS_CONNECT = 0,
      VIR_DOMAIN_EVENT_GRAPHICS_INITIALIZE,
      VIR_DOMAIN_EVENT_GRAPHICS_DISCONNECT,
  } virDomainEventGraphicsPhase;

Connect/disconnect are triggered at socket accept/close.
The initialize phase is immediately after the protocol
setup and authentication has completed. ie when the
client is authorized and about to start interacting with
the graphical desktop

This event comes with *a lot* of potential information

 - IP address, port & address family of client
 - IP address, port & address family of server
 - Authentication scheme (arbitrary string)
 - Authenticated subject identity. A subject may have
   multiple identities with some authentication schemes.
   For example, vencrypt+sasl results in a x509dname
   and saslUsername identities.

This results in a very complicated callback :-(

   typedef enum {
      VIR_DOMAIN_EVENT_GRAPHICS_ADDRESS_IPV4,
      VIR_DOMAIN_EVENT_GRAPHICS_ADDRESS_IPV6,
   } virDomainEventGraphicsAddressType;

   struct _virDomainEventGraphicsAddress {
       int family;
       const char *node;
       const char *service;
   };
   typedef struct _virDomainEventGraphicsAddress virDomainEventGraphicsAddress;
   typedef virDomainEventGraphicsAddress *virDomainEventGraphicsAddressPtr;

   struct _virDomainEventGraphicsSubject {
      int nidentity;
      struct {
          const char *type;
          const char *name;
      } *identities;
   };
   typedef struct _virDomainEventGraphicsSubject virDomainEventGraphicsSubject;
   typedef virDomainEventGraphicsSubject *virDomainEventGraphicsSubjectPtr;

   typedef void (*virConnectDomainEventGraphicsCallback)(virConnectPtr conn,
                                                         virDomainPtr dom,
                                                         int phase,
                                                         virDomainEventGraphicsAddressPtr local,
                                                         virDomainEventGraphicsAddressPtr remote,
                                                         const char *authScheme,
                                                         virDomainEventGraphicsSubjectPtr subject,
                                                         void *opaque);

The wire protocol is similarly complex

   struct remote_domain_event_graphics_address {
     int family;
     remote_nonnull_string node;
     remote_nonnull_string service;
   };

   const REMOTE_DOMAIN_EVENT_GRAPHICS_IDENTITY_MAX = 20;

   struct remote_domain_event_graphics_identity {
     remote_nonnull_string type;
     remote_nonnull_string name;
   };

   struct remote_domain_event_graphics_msg {
     remote_nonnull_domain dom;
     int phase;
     remote_domain_event_graphics_address local;
     remote_domain_event_graphics_address remote;
     remote_nonnull_string authScheme;
     remote_domain_event_graphics_identity subject<REMOTE_DOMAIN_EVENT_GRAPHICS_IDENTITY_MAX>;
   };

This is currently implemented in QEMU for the VNC graphics
protocol, but designed to be usable with SPICE graphics in
the future too.

* daemon/remote.c: Dispatch graphics events to client
* examples/domain-events/events-c/event-test.c: Watch for
  graphics events
* include/libvirt/libvirt.h.in: Define new graphics event ID
  and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
  src/libvirt_private.syms: Extend API to handle graphics events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
  for VNC events and emit a libvirt graphics event
* src/remote/remote_driver.c: Receive and dispatch graphics
  events to application
* src/remote/remote_protocol.x: Wire protocol definition for
  graphics events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c: Watch for VNC_CONNECTED,
  VNC_INITIALIZED & VNC_DISCONNETED events from QEMU monitor

This introduces a new event type

   VIR_DOMAIN_EVENT_ID_IO_ERROR

This event includes the action that is about to be taken
as a result of the watchdog triggering

  typedef enum {
     VIR_DOMAIN_EVENT_IO_ERROR_NONE = 0,
     VIR_DOMAIN_EVENT_IO_ERROR_PAUSE,
     VIR_DOMAIN_EVENT_IO_ERROR_REPORT,
  } virDomainEventIOErrorAction;

In addition it has the source path of the disk that had the
error and its unique device alias. It does not include the
target device name (/dev/sda), since this would preclude
triggering IO errors from other file backed devices (eg
serial ports connected to a file)

Thus there is a new callback definition for this event type

typedef void (*virConnectDomainEventIOErrorCallback)(virConnectPtr conn,
                                                     virDomainPtr dom,
                                                     const char *srcPath,
                                                     const char *devAlias,
                                                     int action,
                                                     void *opaque);

This is currently wired up to the QEMU block IO error events

* daemon/remote.c: Dispatch IO error events to client
* examples/domain-events/events-c/event-test.c: Watch for
  IO error events
* include/libvirt/libvirt.h.in: Define new IO error event ID
  and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
  src/libvirt_private.syms: Extend API to handle IO error events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
  for block IO errors and emit a libvirt IO error event
* src/remote/remote_driver.c: Receive and dispatch IO error
  events to application
* src/remote/remote_protocol.x: Wire protocol definition for
  IO error events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c: Watch for BLOCK_IO_ERROR event
  from QEMU monitor

This introduces a new event type

   VIR_DOMAIN_EVENT_ID_WATCHDOG

This event includes the action that is about to be taken
as a result of the watchdog triggering

 typedef enum {
     VIR_DOMAIN_EVENT_WATCHDOG_NONE = 0,
     VIR_DOMAIN_EVENT_WATCHDOG_PAUSE,
     VIR_DOMAIN_EVENT_WATCHDOG_RESET,
     VIR_DOMAIN_EVENT_WATCHDOG_POWEROFF,
     VIR_DOMAIN_EVENT_WATCHDOG_SHUTDOWN,
     VIR_DOMAIN_EVENT_WATCHDOG_DEBUG,
 } virDomainEventWatchdogAction;

Thus there is a new callback definition for this event type

 typedef void (*virConnectDomainEventWatchdogCallback)(virConnectPtr conn,
                                                       virDomainPtr dom,
                                                       int action,
                                                       void *opaque);

* daemon/remote.c: Dispatch watchdog events to client
* examples/domain-events/events-c/event-test.c: Watch for
  watchdog events
* include/libvirt/libvirt.h.in: Define new watchdg event ID
  and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
  src/libvirt_private.syms: Extend API to handle watchdog events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
  for watchdogs and emit a libvirt watchdog event
* src/remote/remote_driver.c: Receive and dispatch watchdog
  events to application
* src/remote/remote_protocol.x: Wire protocol definition for
  watchdog events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c: Watch for WATCHDOG event
  from QEMU monitor

This introduces a new event type

   VIR_DOMAIN_EVENT_ID_RTC_CHANGE

This event includes the new UTC offset measured in seconds.
Thus there is a new callback definition for this event type

 typedef void (*virConnectDomainEventRTCChangeCallback)(virConnectPtr conn,
                                                        virDomainPtr dom,
                                                        long long utcoffset,
                                                        void *opaque);

If the guest XML configuration for the <clock> is set to
offset='variable', then the XML will automatically be
updated with the new UTC offset value. This ensures that
during migration/save/restore the new offset is preserved.

* daemon/remote.c: Dispatch RTC change events to client
* examples/domain-events/events-c/event-test.c: Watch for
  RTC change events
* include/libvirt/libvirt.h.in: Define new RTC change event ID
  and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
  src/libvirt_private.syms: Extend API to handle RTC change events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
  for RTC changes and emit a libvirt RTC change event
* src/remote/remote_driver.c: Receive and dispatch RTC change
  events to application
* src/remote/remote_protocol.x: Wire protocol definition for
  RTC change events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c: Watch for RTC_CHANGE event
  from QEMU monitor

The reboot event is not a normal lifecycle event, since the
virtual machine on the host does not change state. Rather the
guest OS is resetting the virtual CPUs. ie, the QEMU process
does not restart. Thus, this does not belong in the current
lifecycle events callback.

This introduces a new event type

    VIR_DOMAIN_EVENT_ID_REBOOT

It takes no parameters, besides the virDomainPtr, so it can
use the generic callback signature.

* daemon/remote.c: Dispatch reboot events to client
* examples/domain-events/events-c/event-test.c: Watch for
  reboot events
* include/libvirt/libvirt.h.in: Define new reboot event ID
* src/conf/domain_event.c, src/conf/domain_event.h,
  src/libvirt_private.syms: Extend API to handle reboot events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
  for reboots and emit a libvirt reboot event
* src/remote/remote_driver.c: Receive and dispatch reboot
  events to application
* src/remote/remote_protocol.x: Wire protocol definition for
  reboot events

To avoid confusion, rename the current REMOTE_PROC_DOMAIN_EVENT
message to REMOTE_PROC_DOMAIN_EVENT_LIFECYCLE. This does not
cause ABI problems, since the names are only relevant at the source
code level. On the wire they encoding is a plain integer whose
value does not change

* src/remote/remote_protocol.x: Rename REMOTE_PROC_DOMAIN_EVENT
  to REMOTE_PROC_DOMAIN_EVENT_LIFECYCLE.
* daemon/remote.c, src/remote/remote_driver.c: Update code for
  renamed event

This wires up the remote driver to handle the new events APIs.
The public API allows an application to request a callback filters
events to a specific domain object, and register multiple callbacks
for the same event type. On the wire there are two strategies for
this

 - Register multiple callbacks with the remote daemon, each
   with filtering as needed
 - Register only one callback per event type, with no filtering

Both approaches have potential inefficiency. In the first scheme,
the same event gets sent over the wire many times if multiple
callbacks are registered. With the second scheme, unneccessary
events get sent over the wire if a per-domain filter is set on
the client. The second scheme is far easier to implement though,
so this patch takes that approach.

* daemon/dispatch.h: Don't export remoteRelayDomainEvent since it
  is no longer needed for unregistering callbacks, instead the
  unique callback ID is used
* daemon/libvirtd.c, daemon/libvirtd.h: Track and unregister
  callbacks based on callback ID, instead of function pointer
* daemon/remote.c: Switch over to using virConnectDomainEventRegisterAny
  instead of legacy virConnectDomainEventRegister function. Refactor
  remoteDispatchDomainEventSend() to cope with arbitrary event types
* src/driver.h, src/driver.c: Move verify() call into source file
  instead of header, to avoid polluting the global namespace with
  the verify function name
* src/remote/remote_driver.c: Implement new APIs for event
  registration. Refactor processCallDispatchMessage() to cope
  with arbitrary incoming event types. Merge remoteDomainQueueEvent()
  into processCallDispatchMessage() to avoid duplication of code.
  Rename remoteDomainReadEvent() to remoteDomainReadEventLifecycle()
* src/remote/remote_protocol.x: Define wire format for the new
  virConnectDomainEventRegisterAny and virConnectDomainEventDeregisterAny
  functions