Modify _virDomainBlockIoTuneInfo and rng schema to support the group_name
option for iotune throttling. Document the new value.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add support to read/parse the iotune group setting for qemu.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add a global check for duplicate drive addresses. This will fix the
problem of duplicate disk and hostdev drive addresses.

Example for duplicate drive addresses:
<disk>
  ...
  <target name='sda'/>
</disk>
<disk>
  ...
  <target name='sdb'/>
  <address type='drive' controller=0 bus=0 target=0 unit=0/>
</disk>

Another example:
<hostdev mode='subsystem' type='scsi' managed='no'>
  <source>
  ...
  </source>
  <address type='drive' controller='0' bus='0' target='0' unit='0'/>
</hostdev>
<hostdev mode='subsystem' type='scsi' managed='no'>
  <source>
  ...
  </source>
  <address type='drive' controller='0' bus='0' target='0' unit='0'/>
</hostdev>

Unfortunately the fixes (1b08cc17,
8d46386b) weren't enough to catch these
cases and it isn't possible to add additional checks in
virDomainDeviceDefPostParseInternal() for SCSI hostdevs or
virDomainDiskDefAssignAddress() for SCSI/IDE/FDC/SATA disks without
adding another parse flag (virDomainDefParseFlags) to disable this
validation while updating or detaching a disk or hostdev.
Signed-off-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Comparing the parameter 'type' against the member 'bus' instead of
against the member 'type' is quite confusing. Rename the parameter
'type' to 'bus_type' to clarify its meaning.
Signed-off-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>

Pass the virDomainDeviceDriveAddress as a struct instead of individual
arguments. Reworked the function descriptions.
Signed-off-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

When virt-aa-helper parses xml content it can fail on security labels.

It fails by requiring to parse active domain content on seclabels that
are not yet filled in.

Testcase with virt-aa-helper on a minimal xml:
 $ cat << EOF > /tmp/test.xml
<domain type='kvm'>
    <name>test-seclabel</name>
    <uuid>12345678-9abc-def1-2345-6789abcdef00</uuid>
    <memory unit='KiB'>1</memory>
    <os><type arch='x86_64'>hvm</type></os>
    <seclabel type='dynamic' model='apparmor' relabel='yes'/>
    <seclabel type='dynamic' model='dac' relabel='yes'/>
</domain>
EOF
 $ /usr/lib/libvirt/virt-aa-helper -d -r -p 0 \
   -u libvirt-12345678-9abc-def1-2345-6789abcdef00 < /tmp/test.xml

Current Result:
 virt-aa-helper: error: could not parse XML
 virt-aa-helper: error: could not get VM definition
Expected Result is a valid apparmor profile
Signed-off-by: NChristian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: NGuido Günther <agx@sigxcpu.org>

With the QEMU components in place, provide the XML parsing to
invoke that code when given the following XML snippet:

    <hostdev mode='subsystem' type='scsi_host'>
      <source protocol='vhost' wwpn='naa.501234567890abcd'/>
    </hostdev>

An optional address element can be specified within the hostdev
(pick CCW or PCI as necessary):

    <address type='ccw' cssid='0xfe' ssid='0x0' devno='0x0625'/>
    <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>

Add basic vhost-scsi tests which were cloned from hostdev-scsi-virtio-scsi
in both xml2argv and xml2xml. Added ones for both vhost-scsi-ccw and
vhost-scsi-pci since the syntaxes are slightly different between them.

Also adjusted the docs to describe the changes.
Signed-off-by: NEric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>

We already have a "scsi" hostdev subsys type, which refers to a single
LUN that is passed through to a guest.  But what of things where
multiple LUNs are passed through via a single SCSI HBA, such as with
the vhost-scsi target?  Create a new hostdev subsys type that will
carry this.
Signed-off-by: NEric Farman <farman@linux.vnet.ibm.com>

Use the util function virHostdevIsSCSIDevice() to simplify if
statements.
Signed-off-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>

As was suggested in an earlier review comment[1], we can
catch some additional code points by cleaning up how we use the
hostdev subsystem type in some switch statements.

[1] End of https://www.redhat.com/archives/libvir-list/2016-September/msg00399.htmlSigned-off-by: NEric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Simplify handling of the 'dimm' address element by allowing to specify
the slot number only. This will allow libvirt to allocate slot numbers
before starting qemu.

The old ivshmem is deprecated in QEMU, so let's use the better
ivshmem-{plain,doorbell} variants instead.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Just the default one now, new ones will be added in following commits.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Modify _virDomainBlockIoTuneInfo and rng schema to support the _length
options for bps/iops throttling values. Document the new values.

Since TLS was introduced hostwide for libvirt 2.3.0 and a domain
configurable haveTLS was implemented for libvirt 2.4.0, we have to
modify the migratable XML for specific case where the 'tls' attribute
is based on setting from qemu.conf.

The "tlsFromConfig" is libvirt internal attribute and is stored only in
status XML to ensure that when libvirtd is restarted this internal flag
is not lost by the restart.

That flag is used to decide whether we should put *tls* attribute to
migratable XML or not.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Add an optional "tls='yes|no'" attribute for a TCP chardev.

For QEMU, this will allow for disabling the host config setting of the
'chardev_tls' for a domain chardev channel by setting the value to "no" or
to attempt to use a host TLS environment when setting the value to "yes"
when the host config 'chardev_tls' setting is disabled, but a TLS environment
is configured via either the host config 'chardev_tls_x509_cert_dir' or
'default_tls_x509_cert_dir'
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Currently the union has only one member so remove that union.  If there
is a need to add a new type of source for new bus in the future this
will force the author to add a union and properly check bus type before
any access to union member.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Rather than VIR_ALLOC() the data, use virDomainChrSourceDefNew in order
to get the private data if necessary.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Use a pointer and the virDomainChrSourceDefNew() function in order to
allocate the structure for _virDomainRedirdevDef.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Use a pointer and the virDomainChrSourceDefNew() function in order to
allocate the structure for _virDomainSmartcardDef.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Commit id '5f2a1327' should have placed the data in the host source
def structure since that's also used by smartcard, redirdev, and rng in
order to provide a backend tcp channel.  The data in the private structure
will be necessary in order to provide the secret properly.

This also renames the previous names from "Chardev" to "ChrSource" for
the private data structures and API's

Change the virDomainChrDef to use a pointer to 'source' and allocate
that pointer during virDomainChrDefNew.

This has tremendous "fallout" in the rest of the code which mainly
has to change source.$field to source->$field.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Rather than VIR_ALLOC of the virDomainChrDefPtr

Modeled after the qemuDomainHostdevPrivatePtr (commit id '27726d8c'),
create a privateData pointer in the _virDomainChardevDef to allow storage
of private data for a hypervisor in order to at least temporarily store
secret data for usage during qemuBuildCommandLine.

NB: Since the qemu_parse_command (qemuParseCommandLine) code is not
expecting to restore the secret data, there's no need to add code
code to handle this new structure there.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Without them we're keeping <alias/> even for inactive XML.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This function for some weird reason returns integer instead of
virDomainNetType type. It is important to return the correct type
so that we know what values we can expect.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

There are couple of formatting issues. No functional change
though.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Due to the switch of parameters in a call to virDomainShmemDefEquals()
no device was found when looking for device with all the information
except address.  Also fix the indentation.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Make sure that the topology results into a sane number of cpus (up to
UINT_MAX) so that it can be sanely compared to the vcpu count of the VM.

Additionally the helper added in this patch allows to fetch the total
number the topology results to so that it does not have to be
reimplemented later.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1378290

Use much simpler logic to determine parts of the code to print.

Rather than copy-paste - use a macro

Unfortunately due to how the RNG schema was written keeping the 'value'
and 'value'_max next to each other in the XML causes a schema failure,
so the FORMAT has to write out singly rather than optimizing to write
out both values at once
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

This breaks vCPU hotplug, because when starting a domain, we
create a copy of domain definition (which becomes live XML) and
during the post parse callbacks we might adjust some tunings so
that vCPU hotplug is possible.

This reverts commit 581b7756.

This breaks vCPU hotplug, because when starting a domain, we
create a copy of domain definition (which becomes live XML) and
during the post parse callbacks we might adjust some tunings so
that vCPU hotplug is possible.

This reverts commit c0f90799.

Certain operations may make the vcpu order information invalid. Since
the order is primarily used to ensure migration compatibility and has
basically no other user benefits, clear the order prior to certain
operations and document that it may be cleared.

All the operations that would clear the order can still be properly
executed by defining a new domain configuration rather than using the
helper APIs.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1370357

So far only guestfwd and virtio were supported. Add an additional
for Xen as libxl channels create a Xen console visible to the guest.
Signed-off-by: NJoao Martins <joao.m.martins@oracle.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

When creating a copy of virDomainDef we save ourselves the
trouble of writing deep-copy functions and just format and parse
back domain/device XML. However, the XML we are parsing was
already fully formatted - there is no reason to run post parse
callbacks (which fill in blanks - there are none!).
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This is an internal flag that prevents our two entry points to
XML parsing (virDomainDefParse and virDomainDeviceDefParse) from
running post parse callbacks. This is expected to be used in
cases when we already have full domain/device XML and we are just
parsing it back (i.e. virDomainDefCopy or virDomainDeviceDefCopy)
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>