Update the VSphere version comment in esx_vi.c for ESX 5.1 and 5.5.

Replace:
if (virBufferError(&buf)) {
    virBufferFreeAndReset(&buf);
    virReportOOMError();
    ...
}

with:
if (virBufferCheckError(&buf) < 0)
    ...

This should not be a functional change (unless some callers
misused the virBuffer APIs - a different error would be reported
then)

Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

If there should be some sort of separator it is better to use comment
with the filename, copyright, description, license information and
authors.

Found by:

git grep -nH '^$' | grep '\.[ch]:1:'
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Code cleanup: remove explicit NULL comparisons like ptr == NULL and
ptr != NULL from the ESX code, replacing them with the simpler ptr
and !ptr.

Part one of three.

The ESX code has a method esxVI_Alloc which would call
virAllocN directly, instead of using the VIR_ALLOC_N
macro. Remove this method and make the callers just
use VIR_ALLOC as is normal practice.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

New coverity installation determined that the muliple if condition for
"*Alloc" and "*AppendToList" could fail during AppendToList thus leaking
memory.

Signed-off-by: NEric Blake <eblake@redhat.com>

Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Similarly to VIR_STRDUP, we want the OOM error to be reported in
VIR_ALLOC and friends.

As the name parameter can be NULL the error message can only contain it
conditionally.

The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.

Coverity complains that the objectSpec != NULL check was unnecessary because
there was no way to get to the label with objectSpec = NULL.

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The patch adds the backend driver to support iSCSI format storage pools
and volumes for ESX host. The mapping of ESX iSCSI specifics to Libvirt
is as follows:

1. ESX static iSCSI target <------> Libvirt Storage Pools
2. ESX iSCSI LUNs          <------> Libvirt Storage Volumes.

The above understanding is based on http://libvirt.org/storage.html.

The operation supported on iSCSI pools includes:

1. List storage pools & volumes.
2. Get XML descriptor operaion on pools & volumes.
3. Lookup operation on pools & volumes by name, UUID and path (if applicable).

iSCSI pools does not support operations such as: Create / remove pools
and volumes.

The patch refactors the current ESX storage driver due to following reasons:

1. Given most of the public APIs exposed by the storage driver in Libvirt
remains same, ESX storage driver should not implement logic specific
for only one supported format (current implementation only supports VMFS).
2. Decoupling interface from specific storage implementation gives us an
extensible design to hook implementation for other supported storage
formats.

This patch refactors the current driver to implement it as a facade pattern i.e.
the driver exposes all the public libvirt APIs, but uses backend drivers to get
the required task done. The backend drivers provide implementation specific to
the type of storage device.

File changes:
------------------
esx_storage_driver.c ----> esx_storage_driver.c (base storage driver)
                     |
                     |---> esx_storage_backend_vmfs.c (VMFS backend)

After the connection to ESX 5.1 being broken since g1e7cd395, the fix
in bab7752c helped a bit, but still missed a spot, so the connection
is now successful, but some APIs (for example defineXML) don't work.
Two cases missing are added in this patch to avoid that.

The libvirt coding standard is to use 'function(...args...)'
instead of 'function (...args...)'. A non-trivial number of
places did not follow this rule and are fixed in this patch.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Also remove warnings for upcoming versions. There hadn't been any
compatibility problems with new ESX version over the whole lifetime
of the ESX driver, so I don't expect any in the future.

Update documentation to mention vSphere 5.x support.

libcurl uses a SIGALRM in combination with sigsetjmp/siglongjmp to be
able to abort a DNS lookup when it takes too long. The problem with this
in a multi-threaded application is that the signal handler for SIGALRM
and the call to siglongjmp can be executed on a thread that is different
from the one that initially did the SIGALRM setup and the call to
sigsetjmp. In the reported case this triggered a segfault.

Disable libcurl's use of signals to avoid this situation. This has the
disadvantage of losing the ability to abort synchronous DNS lookups which
might result in libcurl getting stuck in a DNS lookup in the worst case.
When libcurl was build with an asynchronous DNS backend such as c-ares
then there is no problem because the timeout mechanism works without
signals here anyway.

Reported by Benjamin Wang.

https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.

* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/;  If/.  If/

An ESX server has one or more PhysicalNics that represent the actual
hardware NICs. Those can be listed via the interface driver.

A libvirt virtual network is mapped to a HostVirtualSwitch. On the
physical side a HostVirtualSwitch can be connected to PhysicalNics.
On the virtual side a HostVirtualSwitch has HostPortGroups that are
mapped to libvirt virtual network's portgroups. Typically there is
HostPortGroups named 'VM Network' that is used to connect virtual
machines to a HostVirtualSwitch. A second HostPortGroup typically
named 'Management Network' is used to connect the hypervisor itself
to the HostVirtualSwitch. This one is not mapped to a libvirt virtual
network's portgroup. There can be more HostPortGroups than those
typical two on a HostVirtualSwitch.

         +---------------+-------------------+
   ...---|               |                   |   +-------------+
         | HostPortGroup |                   |---| PhysicalNic |
         |   VM Network  |                   |   |    vmnic0   |
   ...---|               |                   |   +-------------+
         +---------------+ HostVirtualSwitch |
                         |     vSwitch0      |
         +---------------+                   |
         | HostPortGroup |                   |
   ...---|   Management  |                   |
         |    Network    |                   |
         +---------------+-------------------+

The virtual counterparts of the PhysicalNic is the HostVirtualNic for
the hypervisor and the VirtualEthernetCard for the virtual machines
that are grouped into HostPortGroups.

   +---------------------+   +---------------+---...
   | VirtualEthernetCard |---|               |
   +---------------------+   | HostPortGroup |
   +---------------------+   |   VM Network  |
   | VirtualEthernetCard |---|               |
   +---------------------+   +---------------+
                                             |
                             +---------------+
   +---------------------+   | HostPortGroup |
   |    HostVirtualNic   |---|   Management  |
   +---------------------+   |    Network    |
                             +---------------+---...

The currently implemented network driver can list, define and undefine
HostVirtualSwitches including HostPortGroups for virtual machines.
Existing HostVirtualSwitches cannot be edited yet. This will be added
in a followup patch.

esxVI_LookupHostSystemProperties guarantees that hostSystem is non-NULL.
Remove redundant NULL checks from callers.

Also prefer esxVI_GetStringValue over open-coding the logic.

Lists available PhysicalNic devices. A PhysicalNic is always active
and can neither be defined nor undefined.

A PhysicalNic is used to bridge a HostVirtualSwitch to the physical
network.

Print the actual unknown type name instead of <other> for AnyType objects.

Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)

  You should have received a copy of the GNU General Public License
  along with Foobar.  If not, see <http://www.gnu.org/licenses/>.

This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').

Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:

  src/security/security_selinux.h
  src/security/security_driver.h
  src/security/security_selinux.c
  src/security/security_apparmor.h
  src/security/security_apparmor.c
  src/security/security_driver.c

Update the ESX driver to use virReportError instead of
the ESX_ERROR & ESX_VI_ERROR custom macros
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Also ensure that the virBuffer used to store the downloaded data
does not overflow.

Appending an item to a list transfers ownership of that item to the
list owner. But an error can occur in between item allocation and
appending it to the list. In this case the item has to be freed
explicitly. This was not done in some special cases resulting in
possible memory leaks.

Reported by Coverity.