- 04 5月, 2011 2 次提交
-
-
由 Eric Blake 提交于
Clang noticed a dead assignment, which turned out to be the use of the wrong variable. rc starts life as -1, and is only ever assigned to 0 just before a successful cleanup. * src/lxc/lxc_driver.c (lxcSetupInterfaces): Don't call virReportSystemError(-1).
-
由 Eric Blake 提交于
This reverts commit 0e7f7f85. From the mailing list: > So, AFAICT, this patch means we will never reconnect to any LXC > VMs now. > > The correct solution, is to refactor LXC driver startup to work > the same way as the QEMU driver startup. > > - Load all the live state XML files (to pick up running VMs) > - Reconnect to all VMs > - Load all the persistent config XML files (to pick up any additional > inactive guets) But that solution is invasive enough to be post-0.9.1.
-
- 03 5月, 2011 1 次提交
-
-
由 Osier Yang 提交于
Otherwise if there are inactive lxc domains, lxcStartup will try to reconnect to sockets of these domains, which results in errors in libvirtd log.
-
- 29 3月, 2011 2 次提交
-
-
由 Osier Yang 提交于
LXC driver doesn't support vcpu affinity yet, so just need to modify it to support cpu shares.
-
由 Daniel P. Berrange 提交于
The O_NONBLOCK flag doesn't work as desired on plain files or block devices. Introduce an I/O helper program that does the blocking I/O operations, communicating over a pipe that can support O_NONBLOCK * src/fdstream.c, src/fdstream.h: Add non-blocking I/O on plain files/block devices * src/Makefile.am, src/util/iohelper.c: I/O helper program * src/qemu/qemu_driver.c, src/lxc/lxc_driver.c, src/uml/uml_driver.c, src/xen/xen_driver.c: Update for streams API change
-
- 22 3月, 2011 2 次提交
-
-
由 Daniel P. Berrange 提交于
THe veth setup in LXC had a couple of flaws, first brInit did not report any error when it failed. Second vethCreate() did not correctly initialize the variable containing the return code, so could report failure even when it succeeded. * src/lxc/lxc_driver.c: Report error when brInit fails * src/lxc/veth.c: Fix uninitialized variable
-
由 Daniel P. Berrange 提交于
It is possible to set a migration speed limit when starting migration. This new API allows the speed limit to be changed on the fly to adjust to changing conditions * src/driver.h, src/libvirt.c, src/libvirt_public.syms, include/libvirt/libvirt.h.in: Add virDomainMigrateSetMaxSpeed * src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c, src/openvz/openvz_driver.c, src/phyp/phyp_driver.c, src/qemu/qemu_driver.c, src/remote/remote_driver.c, src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c, src/vmware/vmware_driver.c, src/xen/xen_driver.c, src/libxl/libxl_driver.c: Stub new API
-
- 18 3月, 2011 1 次提交
-
-
由 Nikunj A. Dadhania 提交于
* Correct the documentation for cgroup: the swap_hard_limit indicates mem+swap_hard_limit. * Change cgroup private apis to: virCgroupGet/SetMemSwapHardLimit Signed-off-by: NNikunj A. Dadhania <nikunj@linux.vnet.ibm.com>
-
- 15 3月, 2011 1 次提交
-
-
由 Daniel P. Berrange 提交于
The current LXC I/O controller looks for HUP to detect when a guest has quit. This isn't reliable as during initial bootup it is possible that 'init' will close the console and let mingetty re-open it. The shutdown of containers was also flakey because it only killed the libvirt I/O controller and expected container processes to gracefully follow. Change the I/O controller such that when it see HUP or an I/O error, it uses kill($PID, 0) to see if the process has really quit. Change the container shutdown sequence to use the virCgroupKillPainfully function to ensure every really goes away This change makes the use of the 'cpu', 'devices' and 'memory' cgroups controllers compulsory with LXC * docs/drvlxc.html.in: Document that certain cgroups controllers are now mandatory * src/lxc/lxc_controller.c: Check if PID is still alive before quitting on I/O error/HUP * src/lxc/lxc_driver.c: Use virCgroupKillPainfully
-
- 11 3月, 2011 2 次提交
-
-
由 Gui Jianfeng 提交于
Implements virDomainSetBlkioParameters and virDomainGetBlkioParameters and initialization Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com>
-
由 Taku Izumi 提交于
This patch introduces a new libvirt API (virDomainSetMemoryFlags) and a flag (virDomainMemoryModFlags). Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>
-
- 25 2月, 2011 1 次提交
-
-
由 Daniel P. Berrange 提交于
Relax the restriction that the hash table key must be a string by allowing an arbitrary hash code generator + comparison func to be provided * util/hash.c, util/hash.h: Allow any pointer as a key * internal.h: Include stdbool.h as standard. * conf/domain_conf.c, conf/domain_conf.c, conf/nwfilter_params.c, nwfilter/nwfilter_gentech_driver.c, nwfilter/nwfilter_gentech_driver.h, nwfilter/nwfilter_learnipaddr.c, qemu/qemu_command.c, qemu/qemu_driver.c, qemu/qemu_process.c, uml/uml_driver.c, xen/xm_internal.c: s/char */void */ in hash callbacks
-
- 24 2月, 2011 1 次提交
-
-
由 Daniel P. Berrange 提交于
Remove the <stdbool.h> header from all source files / headers and just put it into internal.h * src/internal.h: Add <stdbool.h>
-
- 21 2月, 2011 1 次提交
-
-
由 Eric Blake 提交于
Done mechanically with: $ git grep -l '\bDEBUG0\? *(' | xargs -L1 sed -i 's/\bDEBUG0\? *(/VIR_&/' followed by manual deletion of qemudDebug in daemon/libvirtd.c, along with a single 'make syntax-check' fallout in the same file, and the actual deletion in src/util/logging.h. * src/util/logging.h (DEBUG, DEBUG0): Delete. * daemon/libvirtd.h (qemudDebug): Likewise. * global: Change remaining clients over to VIR_DEBUG counterpart.
-
- 09 2月, 2011 1 次提交
-
-
由 Eric Blake 提交于
* src/driver.h (virDrvGetSysinfo): New typedef. (_virDriver): New callback member. * src/esx/esx_driver.c (esxDriver): Add stub for driver. * src/lxc/lxc_driver.c (lxcDriver): Likewise. * src/opennebula/one_driver.c (oneDriver): Likewise. * src/openvz/openvz_driver.c (openvzDriver): Likewise. * src/phyp/phyp_driver.c (phypDriver): Likewise. * src/qemu/qemu_driver.c (qemuDriver): Likewise. * src/remote/remote_driver.c (remote_driver): Likewise. * src/test/test_driver.c (testDriver): Likewise. * src/uml/uml_driver.c (umlDriver): Likewise. * src/vbox/vbox_tmpl.c (Driver): Likewise. * src/vmware/vmware_driver.c (vmwareDriver): Likewise. * src/xen/xen_driver.c (xenUnifiedDriver): Likewise. * src/xenapi/xenapi_driver.c (xenapiDriver): Likewise.
-
- 22 1月, 2011 1 次提交
-
-
由 Cole Robinson 提交于
This will allow us to record transient runtime state in vm->def, like default VNC parameters. Accomplish this by adding an extra 'live' parameter to SetDefTransient, with similar semantics to the 'live' flag for AssignDef.
-
- 19 1月, 2011 1 次提交
-
-
由 Matthias Bolte 提交于
VIR_ERR_OPERATION_INVALID means that the operation is not valid for the current state of the involved object.
-
- 15 1月, 2011 2 次提交
-
-
由 Nikunj A. Dadhania 提交于
Display or set unlimited values for memory parameters. Unlimited is represented by INT64_MAX in memory cgroup. Signed-off-by: NNikunj A. Dadhania <nikunj@linux.vnet.ibm.com> Reported-by: NJustin Clift <jclift@redhat.com>
-
由 Eric Blake 提交于
This opens up the possibility of reusing the smaller ChrSourceDef for both qemu monitor and a passthrough smartcard device. * src/conf/domain_conf.h (_virDomainChrDef): Factor host details... (_virDomainChrSourceDef): ...into new struct. (virDomainChrSourceDefFree): New prototype. * src/conf/domain_conf.c (virDomainChrDefFree) (virDomainChrDefParseXML, virDomainChrDefFormat): Split... (virDomainChrSourceDefClear, virDomainChrSourceDefFree) (virDomainChrSourceDefParseXML, virDomainChrSourceDefFormat): ...into new functions. (virDomainChrDefParseTargetXML): Update clients to reflect type split. * src/vmx/vmx.c (virVMXParseSerial, virVMXParseParallel) (virVMXFormatSerial, virVMXFormatParallel): Likewise. * src/xen/xen_driver.c (xenUnifiedDomainOpenConsole): Likewise. * src/xen/xend_internal.c (xenDaemonParseSxprChar) (xenDaemonFormatSxprChr): Likewise. * src/vbox/vbox_tmpl.c (vboxDomainDumpXML, vboxAttachSerial) (vboxAttachParallel): Likewise. * src/security/security_dac.c (virSecurityDACSetChardevLabel) (virSecurityDACSetChardevCallback) (virSecurityDACRestoreChardevLabel) (virSecurityDACRestoreChardevCallback): Likewise. * src/security/security_selinux.c (SELinuxSetSecurityChardevLabel) (SELinuxSetSecurityChardevCallback) (SELinuxRestoreSecurityChardevLabel) (SELinuxSetSecurityChardevCallback): Likewise. * src/security/virt-aa-helper.c (get_files): Likewise. * src/lxc/lxc_driver.c (lxcVmStart, lxcDomainOpenConsole): Likewise. * src/uml/uml_conf.c (umlBuildCommandLineChr): Likewise. * src/uml/uml_driver.c (umlIdentifyOneChrPTY, umlIdentifyChrPTY) (umlDomainOpenConsole): Likewise. * src/qemu/qemu_command.c (qemuBuildChrChardevStr) (qemuBuildChrArgStr, qemuBuildCommandLine) (qemuParseCommandLineChr): Likewise. * src/qemu/qemu_domain.c (qemuDomainObjPrivateXMLFormat) (qemuDomainObjPrivateXMLParse): Likewise. * src/qemu/qemu_cgroup.c (qemuSetupChardevCgroup): Likewise. * src/qemu/qemu_hotplug.c (qemuDomainAttachNetDevice): Likewise. * src/qemu/qemu_driver.c (qemudFindCharDevicePTYsMonitor) (qemudFindCharDevicePTYs, qemuPrepareChardevDevice) (qemuPrepareMonitorChr, qemudShutdownVMDaemon) (qemuDomainOpenConsole): Likewise. * src/qemu/qemu_command.h (qemuBuildChrChardevStr) (qemuBuildChrArgStr): Delete, now that they are static. * src/libvirt_private.syms (domain_conf.h): New exports. * cfg.mk (useless_free_options): Update list. * tests/qemuxml2argvtest.c (testCompareXMLToArgvFiles): Update tests.
-
- 25 11月, 2010 1 次提交
-
-
由 Osier Yang 提交于
Except LXC and UML driver, implementations of all other drivers simply return 0, because these drivers doesn't have config both in memory and on disk, no need to track if the domain of these drivers updated or not. Rename "xenUnifiedDomainisPersistent" to "xenUnifiedDomainIsPersistent" * esx/esx_driver.c * lxc/lxc_driver.c * opennebula/one_driver.c * openvz/openvz_driver.c * phyp/phyp_driver.c * test/test_driver.c * uml/uml_driver.c * vbox/vbox_tmpl.c * xen/xen_driver.c * xenapi/xenapi_driver.c
-
- 24 11月, 2010 1 次提交
-
-
由 Osier Yang 提交于
* src/driver.h (new typedef, new callback member for "_virDriver") * src/esx/esx_driver.c * src/lxc/lxc_driver.c * src/opennebula/one_driver.c * src/openvz/openvz_driver.c * src/phyp/phyp_driver.c * src/qemu/qemu_driver.c * src/remote/remote_driver.c * src/test/test_driver.c * src/uml/uml_driver.c * src/vbox/vbox_tmpl.c * src/xen/xen_driver.c * src/xenapi/xenapi_driver.c
-
- 23 11月, 2010 1 次提交
-
-
由 Cole Robinson 提交于
The current semantics of non-persistent hotplug/update are confusing: the changes will persist as long as the in memory domain definition isn't overwritten. This means hotplug changes stay around until the domain is redefined or libvirtd is restarted. Call virDomainObjSetDefTransient at VM startup, so that we properly discard hotplug changes when the VM is shutdown.
-
- 12 11月, 2010 2 次提交
-
-
由 Daniel P. Berrange 提交于
Introduce implementations of the virDomainOpenConsole() API for LXC, Xen and UML drivers. * src/lxc/lxc_driver.c, src/lxc/lxc_driver.c, src/xen/xen_driver.c: Wire up virDomainOpenConsole
-
由 Daniel P. Berrange 提交于
To enable virsh console (or equivalent) to be used remotely it is necessary to provide remote access to the /dev/pts/XXX pseudo-TTY associated with the console/serial/parallel device in the guest. The virStream API provide a bi-directional I/O stream capability that can be used for this purpose. This patch thus introduces a virDomainOpenConsole API that uses the stream APIs. * src/libvirt.c, src/libvirt_public.syms, include/libvirt/libvirt.h.in, src/driver.h: Define the new virDomainOpenConsole API * src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c, src/openvz/openvz_driver.c, src/phyp/phyp_driver.c, src/qemu/qemu_driver.c, src/remote/remote_driver.c, src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c, src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Stub API entry point
-
- 10 11月, 2010 1 次提交
-
-
由 Stefan Berger 提交于
Using automated replacement with sed and editing I have now replaced all occurrences of close() with VIR_(FORCE_)CLOSE() except for one, of course. Some replacements were straight forward, others I needed to pay attention. I hope I payed attention in all the right places... Please have a look. This should have at least solved one more double-close error.
-
- 09 11月, 2010 1 次提交
-
-
由 Matthias Bolte 提交于
There is no point in trying to fill params beyond the first error, because when lxcDomainGetMemoryParameters returns -1 then the caller cannot detect which values in params are valid.
-
- 21 10月, 2010 1 次提交
-
-
由 Matthias Bolte 提交于
To get them under the common VIR_DOMAIN_MEMORY_* prefix.
-
- 20 10月, 2010 2 次提交
-
-
由 Guido Günther 提交于
Debian stock kernel has CONFIG_CGROUP_MEM_RES_CTLR disabled due to the overhead [1]. Allow to start containers if the corresponding files in the cgroup filesystem are missing. This fixes Debian bug #566180 [2]. [1] http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=534964 [2] http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=566180
-
由 Eric Blake 提交于
* src/driver.h (virDrvDomainSetVcpusFlags) (virDrvDomainGetVcpusFlags): New typedefs. (_virDriver): New callback members. * src/esx/esx_driver.c (esxDriver): Add stub for driver. * src/lxc/lxc_driver.c (lxcDriver): Likewise. * src/opennebula/one_driver.c (oneDriver): Likewise. * src/openvz/openvz_driver.c (openvzDriver): Likewise. * src/phyp/phyp_driver.c (phypDriver): Likewise. * src/qemu/qemu_driver.c (qemuDriver): Likewise. * src/remote/remote_driver.c (remote_driver): Likewise. * src/test/test_driver.c (testDriver): Likewise. * src/uml/uml_driver.c (umlDriver): Likewise. * src/vbox/vbox_tmpl.c (Driver): Likewise. * src/xen/xen_driver.c (xenUnifiedDriver): Likewise. * src/xenapi/xenapi_driver.c (xenapiDriver): Likewise.
-
- 13 10月, 2010 4 次提交
-
-
由 Nikunj A. Dadhania 提交于
Driver interface for getting memory parameters, eg. hard_limit, soft_limit and swap_hard_limit.
-
由 Nikunj A. Dadhania 提交于
Add support in the lxc driver for various memory controllable parameters
-
由 Nikunj A. Dadhania 提交于
Adding parsing code for memory tunables in the domain xml file also change the internal define structures used for domain memory informations Adds a new specific test
-
由 Nikunj A. Dadhania 提交于
Public api to set/get memory tunables supported by the hypervisors. dv: * some cleanups in libvirt.c * adding extra checks in libvirt.c new entry points v4: * Move exporting public API to this patch * Add unsigned int flags to the public api for future extensions v3: * Add domainGetMemoryParamters and NULL in all the driver interface v2: * Initialize domainSetMemoryParameters to NULL in all the driver interface structure.
-
- 03 9月, 2010 1 次提交
-
-
由 Eric Blake 提交于
* src/lxc/veth.h (vethCreate): Change prototype. * src/lxc/veth.c (vethCreate): Always malloc veth2, and allocate veth1 if needed. (getFreeVethName): Adjust signature, and use virAsprintf. * src/lxc/lxc_driver.c (lxcSetupInterfaces): Adjust caller.
-
- 30 7月, 2010 1 次提交
-
-
由 Ryota Ozaki 提交于
Previously, the functions in src/lxc/veth.c could sometimes return positive values on failure rather than -1. This made accurate error reporting difficult, and led to one failure to catch an error in a calling function. This patch makes all the functions in veth.c consistently return 0 on success, and -1 on failure. It also fixes up the callers to the veth.c functions where necessary. Note that this patch may be related to the bug: https://bugzilla.redhat.com/show_bug.cgi?id=607496. It will not fix the bug, but should unveil what happens. * po/POTFILES.in - add veth.c, which previously had no translatable strings * src/lxc/lxc_controller.c * src/lxc/lxc_container.c * src/lxc/lxc_driver.c - fixup callers to veth.c, and remove error logs, as they are now done in veth.c * src/lxc/veth.c - make all functions consistently return -1 on error. * src/lxc/veth.h - use ATTRIBUTE_NONNULL to protect against NULL args.
-
- 29 7月, 2010 1 次提交
-
-
由 Ryota Ozaki 提交于
lxcStartup forgot to call lxcAutostartConfigs. Fix it. This patch should fix https://bugzilla.redhat.com/show_bug.cgi?id=589863 .
-
- 24 7月, 2010 1 次提交
-
-
由 Chris Lalancette 提交于
Add the library entry point for the new virDomainQemuMonitorCommand() entry point. Because this is not part of the "normal" libvirt API, it gets its own header file, library file, and will eventually get its own over-the-wire protocol later in the series. Changes since v1: - Go back to using the virDriver table for qemuDomainMonitorCommand, due to linking issues - Added versioning information to the libvirt-qemu.so Changes since v2: - None Changes since v3: - Add LGPL header to libvirt-qemu.c - Make virLibConnError and virLibDomainError macros instead of function calls Changes since v4: - Move exported symbols to libvirt_qemu.syms Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
- 29 6月, 2010 1 次提交
-
-
由 Ryota Ozaki 提交于
Because tty path is unexpectedly not saved in the live configuration file of a domain, libvirtd cannot get the console of the domain back after restarting. The reason why the tty path isn't saved is that, to save the tty path, the save function, virDomainSaveConfig, requires that the target domain is running (pid != -1), however, lxc driver calls the function before starting the domain to pass the configuration to controller. To ensure to save the tty path, the patch lets lxc driver call the save function again after starting the domain.
-
- 15 6月, 2010 2 次提交
-
-
由 Eric Blake 提交于
* src/esx/esx_driver.c (esxDomainCreate): Move guts... (esxDomainCreateWithFlags): ...to new function. (esxDriver): Trivially support the new API. * src/lxc/lxc_driver.c (lxcDomainStart, lxcDomainStartWithFlags) (lxcDriver): Likewise. * src/opennebula/one_driver.c (oneDomainStart) (oneDomainStartWithFlags, oneDriver): Likewise. * src/openvz/openvz_driver.c (openvzDomainCreate) (openvzDomainCreateWithFlags, openvzDriver): Likewise. * src/qemu/qemu_driver.c (qemudDomainStart) (qemudDomainStartWithFlags, qemuDriver): Likewise. * src/test/test_driver.c (testDomainCreate) (testDomainCreateWithFlags, testDriver): Likewise. * src/uml/uml_driver.c (umlDomainStart, umlDomainStartWithFlags) (umlDriver): Likewise. * src/vbox/vbox_tmpl.c (vboxDomainCreate) (vboxDomainCreateWithFlags, Driver): Likewise. * src/xen/xen_driver.c (xenUnifiedDomainCreate) (xenUnifiedDomainCreateWithFlags, xenUnifiedDriver): Likewise. * src/xenapi/xenapi_driver.c (xenapiDomainCreate) (xenapiDomainCreateWithFlags, xenapiDriver): Likewise.
-
由 Eric Blake 提交于
Persistent domain creation needs the same features as transient domains, but virDomainCreate lacks the flags argument present in virDomainCreateXML. virDomainCreateFlags is already claimed as a public enum, so we have to break convention and expose virDomainCreateWithFlags. * include/libvirt/libvirt.h.in (virDomainCreateWithFlags): Add. * src/driver.h (virDrvDomainCreateWithFlags): Internal API. * src/libvirt.c (virDomainCreateWithFlags): Glue public API to driver API. * src/libvirt_public.syms (LIBVIRT_0.8.2): Expose public API. * src/esx/esx_driver.c (esxDriver): Add stub for driver. * src/lxc/lxc_driver.c (lxcDriver): Likewise. * src/opennebula/one_driver.c (oneDriver): Likewise. * src/openvz/openvz_driver.c (openvzDriver): Likewise. * src/phyp/phyp_driver.c (phypDriver): Likewise. * src/qemu/qemu_driver.c (qemuDriver): Likewise. * src/remote/remote_driver.c (remote_driver): Likewise. * src/test/test_driver.c (testDriver): Likewise. * src/uml/uml_driver.c (umlDriver): Likewise. * src/vbox/vbox_tmpl.c (Driver): Likewise. * src/xen/xen_driver.c (xenUnifiedDriver): Likewise. * src/xenapi/xenapi_driver.c (xenapiDriver): Likewise.
-