- 04 2月, 2020 33 次提交
-
-
由 Daniel P. Berrangé 提交于
The current event loop test suite has two threads running in lockstep. This was just about viable when we have full control over the internal details of the event loop impl. When we're using the GLib event loop though there are things going on that we don't know about, such as use of eventfd() file descriptors. This will break the assumptions in the test suite, causing non-deterministic failures. This change switches the event loop thread to run fully asynchronously from the test suite cases. This is slightly weaker validation, but the only way we can get a reliable test suite. Reviewed-by: NPavel Hrdina <phrdina@redhat.com> Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>
-
由 Daniel P. Berrangé 提交于
This effectively reverts commit 39c77fe5 Author: Michal Prívozník <mprivozn@redhat.com> Date: Wed Jan 16 11:58:00 2013 +0100 Introduce event loop to commandtest because nothing in the current test suite needs this event loop. Reviewed-by: NPavel Hrdina <phrdina@redhat.com> Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>
-
由 Daniel P. Berrangé 提交于
The event test directly calls the internal poll event impl APIs. It does not rely on any specific details of the poll impl, so it is better to use the public APIs. Reviewed-by: NPavel Hrdina <phrdina@redhat.com> Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>
-
由 Peter Krempa 提交于
The flag for the virDomainUndefine API is supported even if we report that <backup supported='no'/>. Mention it in the docs. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Peter Krempa 提交于
Use qemuBlockBitmapsHandleBlockcopy to calculate bitmaps to copy over for a block-copy job. We copy them when pivoting to the new image as at that point we are certain that we don't dirty any bitmap unnecessarily. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Peter Krempa 提交于
Use some of the existing bitmap data to add tests for qemuBlockBitmapsHandleBlockcopy. As the output depends on the ordering in the hash table we must also install the "virdeterministichash" mock preload library. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Peter Krempa 提交于
Add a function calculating which bitmaps to copy to the mirror during a block-copy operation. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Peter Krempa 提交于
Add a case where a bitmap spanning multiple images is missing one of the intermediate components. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Peter Krempa 提交于
Add a validator which checks that a bitmap spanning multiple backing chain members doesn't look broken. The current rules are that no intermediate birmaps are missing (unfortunately it's hard to know whether the topmost or bottommost bitmap is missing) and none of the components is inconsistent. We can obviously improve it over time. The validator is also tested against the existing bitmap data we have for the backup merging test as well as some of the existing broken bitmap synthetic test cases. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Peter Krempa 提交于
The flags may control important aspects of the block job which may influence also the termination of the job. Store the 'flags' for all the block job types. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Peter Krempa 提交于
Add a variable which will store the contents of the 'flags' variable as passed in by the individual block jobs. Since the flags may influence behaviour of the jobs it's important to preserve them to the finalization steps. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Peter Krempa 提交于
Use g_new0 and skip checking of the return value of keyCopy callback as both are bound to return a valid pointer. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Peter Krempa 提交于
Tweak the return value expectation comment so that it doesn't necessarily require to allocate memory and refactor the implementations. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Peter Krempa 提交于
Use the glib allocation function that never returns NULL and remove the now dead-code checks from all callers. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Peter Krempa 提交于
Add a helper that concatenates the second array into the first. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Peter Krempa 提交于
Create a wrapper for qemuBlockGetNamedNodeData named qemuBlockGetNamedNodeData. The purpose of the wrapper is to integrate the monitor handling functionality and in the future possible qemuCaps-based flags. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Peter Krempa 提交于
Allow qemu access to modify backing files in case when we want to delete a checkpoint. This patch adds tracking of which images need to be relabelled when calculating the transaction, the code to relabel them and rollback. To verify that stuff works we also output the list of images to relabel into the test case output files in qemublocktest. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Peter Krempa 提交于
Use the synthetic test data to verify that the algorithm correctly picks bitmaps to merge when the bitmap is changed along with the image itself. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Peter Krempa 提交于
Add test cases for merging various pairs of bitmaps when snapshots were created together with checkpoints. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Peter Krempa 提交于
Allow deleting of checkpoints when snapshots were created along. The code tracks and modifies the checkpoint list so that backups can still be taken with such a backing chain. This unfortunately requires to rename few bitmaps (by copying and deleting them) in some cases. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Peter Krempa 提交于
Add a faked qemu output which would simulate scenario where libvirt would take a snapshot and checkpoint simultaneously. This is visible in libvirt-2-format node where bitmap 'c' appears, but bitmap 'b' which is active in the previous layer is not present. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Peter Krempa 提交于
Add all intermediate steps and deletion of the current checkpoint on a flat (single-image) disk image. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Peter Krempa 提交于
Add test infrastructure and a basic test for bitmap deletion. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Michal Privoznik 提交于
The location of virt-aa-helper shown in the docs is incorrect. The helper binary is installed under libexec dir. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com> Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
-
由 Michal Privoznik 提交于
The configure script allows users to specify different paths for /etc/, /usr/sbin/, /var/run/ and /usr/libexec/. Instead of assuming user will pass expected value, generate the apparmor profiles using the actual values. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com> Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
-
由 Ján Tomko 提交于
Remove all the labels that are now redundant. Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NPeter Krempa <pkrempa@redhat.com>
-
由 Ján Tomko 提交于
This requires stealing one cmd pointer before returning it. Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NPeter Krempa <pkrempa@redhat.com>
-
由 Ján Tomko 提交于
Mark eligible declarations as g_autofree and remove the corresponding VIR_FREE calls. Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NPeter Krempa <pkrempa@redhat.com>
-
由 Ján Tomko 提交于
qemuExtTPMSetupCgroup declares pidfile but never uses it. Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NPeter Krempa <pkrempa@redhat.com>
-
由 Ján Tomko 提交于
Always trim the full specified suffix. All of the callers outside of tests were passing either strlen or the actual length of the string. Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NPeter Krempa <pkrempa@redhat.com>
-
由 Ján Tomko 提交于
Replace all the cases that only supply the length and do not care about matching a suffix, as well as that one test case that does. Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NPeter Krempa <pkrempa@redhat.com>
-
由 Ján Tomko 提交于
Just like the existing virBufferTrim, but only does one thing at a time. Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NPeter Krempa <pkrempa@redhat.com>
-
由 Jim Fehlig 提交于
As discussed on the developer list, parallel migration connections are not compatible with tunneled migration https://www.redhat.com/archives/libvir-list/2020-January/msg00463.html Prohibit the concurrent use of parallel and tunneled migration options. Signed-off-by: NJim Fehlig <jfehlig@suse.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
- 03 2月, 2020 5 次提交
-
-
由 Julio Faracco 提交于
LXC version 3 config files are still using network old style definition. So, as LXC supports it now, they can be converted to use this new definition. Signed-off-by: NJulio Faracco <jcfaracco@gmail.com> Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Julio Faracco 提交于
Domain definition is useless now inside network structure. This pointer was required because new network definition was being added each time that a new network type appeared. So, this should be processed into old function `lxcNetworkParseDataType()`. Now, as it was moved to an array, it can be handle together each interface pointer. Signed-off-by: NJulio Faracco <jcfaracco@gmail.com> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com> Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Julio Faracco 提交于
LXC version 3 or higher introduced indexes for network interfaces. Libvirt should be able to parse entries like `lxc.net.2.KEY`. This commit adds functions to parse this type of field. That's why array structures are so important this time. Signed-off-by: NJulio Faracco <jcfaracco@gmail.com> Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Julio Faracco 提交于
Struct lxcNetworkParseData is being used as a single pointer which iterates through LXC config lines. It means that it will be applied as a network each time that a new type appears. After, the same struct is used to populate a new network interface. This commit changes this logic to multiple lxcNetworkParseData to move this strcuture to an array. It makes more sense if we are using indexes to fill interface settings. This is better to improve code clarity. This commit still introduces *Legacy() functions to keep support of network old style definitions. Signed-off-by: NJulio Faracco <jcfaracco@gmail.com> Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Andrea Bolognani 提交于
This will be the first QEMU version that will support the kvm-no-adjvtime CPU feature. Signed-off-by: NAndrea Bolognani <abologna@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
- 02 2月, 2020 2 次提交
-
-
由 Michal Privoznik 提交于
Now, that every use of virAtomic was replaced with its g_atomic equivalent, let's remove the module. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Michal Privoznik 提交于
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-