- 23 7月, 2014 7 次提交
-
-
由 Ján Tomko 提交于
For the values "default", "on", "off" Replaces virDeviceAddressPCIMulti virDomainFeatureState virDomainIoEventFd virDomainVirtioEventIdx virDomainDiskCopyOnRead virDomainMemDump virDomainPCIRombarMode virDomainGraphicsSpicePlaybackCompression
-
由 Ján Tomko 提交于
Replace all three-state (default/yes/no) enums with it: virDomainBIOSUseserial virDomainBootMenu virDomainPMState virDomainGraphicsSpiceClipboardCopypaste virDomainGraphicsSpiceAgentFileTransfer virNetworkDNSForwardPlainNames
-
由 Peter Krempa 提交于
The patch described above introduced two problems caught by the compiler and thus breaking the build. One of the problems was comparison of unsigned with < 0 and the second one jumped a variable init.
-
由 Chen Hanxiao 提交于
Before: virsh # dominfo chx3 State: shut off Max memory: 92160 KiB Used memory: 92160 KiB After: virsh # dominfo container1 State: shut off Max memory: 92160 KiB Used memory: 0 KiB Similar to qemu cases. Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>
-
由 Cédric Bosdonnat 提交于
-
由 Cédric Bosdonnat 提交于
Added <capabilities> in the <features> section of LXC domains configuration. This section can contain elements named after the capabilities like: <mknod state="on"/>, keep CAP_MKNOD capability <sys_chroot state="off"/> drop CAP_SYS_CHROOT capability Users can restrict or give more capabilities than the default using this mechanism.
-
由 Chen Hanxiao 提交于
kernel commit 7dc5dbc879bd0779924b5132a48b731a0bc04a1e forbid us doing a fresh mount for sysfs when enable userns but disable netns. This patch will create a bind mount in this senario. Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>
-
- 22 7月, 2014 16 次提交
-
-
由 Michal Privoznik 提交于
In the fbd91d49 commit, new scsihostdata dir is added to EXTRA_DIST in the tests/Makefile.am. However, the directory itself is not created anywhere, nor in the commit. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Peter Krempa 提交于
Qemu doesn't currently support them and behaves strangely. Just forbid them. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1079162
-
由 Peter Krempa 提交于
Similarly to 49a3a649 forbid creating snapshots in domain states impossible to reach in qemu.
-
由 Michal Privoznik 提交于
Firstly, there's no sigaction() nor struct sigaction on mingw. We have to use the one implemented by gnulib (and hence link with gnulib). Then, for some reason one header file from windows defines ERROR symbol. Yes it does. Sigh. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Eric Blake 提交于
Under ./configure --without-numactl but with numactl-devel installed, the build fails with: ../../src/util/virnuma.c: In function 'virNumaNodeIsAvailable': ../../src/util/virnuma.c:407:5: error: implicit declaration of function 'numa_bitmask_isbitset' [-Werror=implicit-function-declaration] return numa_bitmask_isbitset(numa_nodes_ptr, node); ^ and other failures, all because the configure results for particular functions were used without regard to whether libnuma was even being linked in. * src/util/virnuma.c (virNumaGetPages): Fix message typo. (virNumaNodeIsAvailable): Correct build when not using numactl. Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Roman Bogorodskiy 提交于
virStorageBackendLogicalCreateVol contains a piece like: if (vol->target.path != NULL) { /* A target path passed to CreateVol has no meaning */ VIR_FREE(vol->target.path); } The 'if' is useless here, but 'syntax-check' doesn't catch that because of the comment, so drop the 'if'.
-
由 Roman Bogorodskiy 提交于
Commit ef48a1b6 introduced virFindSCSIHostByPCI for Linux and a stub for other platforms that returns -1 while the function should return 'char *', so use 'return NULL' instead. Commit fbd91d49 introduced virReadSCSIUniqueId with the third argument 'int *result', however the stub for non-Linux patform uses 'unsigned int *result', so change it to 'int *result'. Pushed under the build breaker rule.
-
由 John Ferlan 提交于
If a parentaddr was provided in the XML, have getAdapterName lookup the stable address. This allows virStorageBackendSCSICheckPool() and virStorageBackendSCSIRefreshPool() to automagically find the scsi_host by its PCI address and unique_id
-
由 John Ferlan 提交于
Introduce a new function to parse the provided scsi_host parent address and unique_id value in order to find the /sys/class/scsi_host directory which will allow a stable SCSI host address Add a test to scsihosttest to lookup the host# name by using the PCI address and unique_id value
-
由 John Ferlan 提交于
Add an optional unique_id parameter to nodedev. Allows for easier lookup and display of the unique_id value in order to document for use with scsi_host code.
-
由 John Ferlan 提交于
Introduce a new function to read the current scsi_host entry and return the value found in the 'unique_id' file. Add a 'scsihosttest' test (similar to the fchosttest, but incorporating some of the concepts of the mocked pci test library) in order to read the unique_id file like would be found in the /sys/class/scsi_host tree.
-
由 John Ferlan 提交于
Rather than supplying the path again in the formatting of the sysfs scsi_host directory.
-
由 Osier Yang 提交于
Between reboots and kernel reloads, the SCSI host number used for SCSI storage pools may change requiring modification to the storage pool XML in order to use a specific SCSI host adapter. This patch introduces the "parentaddr" element and "unique_id" attribute for the SCSI host adapter in order to uniquely identify the adapter between reboots and kernel reloads. For now the goal is to only parse and format the XML. Both will be required to be provided in order to uniquely identify the desired SCSI host. The new XML is expected to be as follows: <adapter type='scsi_host'> <parentaddr unique_id='3'> <address domain='0x0000' bus='0x00' slot='0x1f' func='0x2'/> </parentaddr> </adapter> where "parentaddr" is the parent device of the SCSI host using the PCI address on which the device resides and the value from the unique_id file for the device. Both the PCI address and unique_id values will be used to traverse the /sys/class/scsi_host/ directories looking at each link to match the PCI address reformatted to the directory link format where "domain:bus:slot:function" is found. Then for each matching directory the unique_id file for the scsi_host will be used to match the unique_id value in the xml. For a PCI address listed above, this will be formatted to "0000:00:1f.2" and the links in /sys/class/scsi_host will be used to find the host# to be used for the 'scsi_host' device. Each entry is a link to the /sys/bus/pci/devices directories, e.g.: % ls -al /sys/class/scsi_host/host2 lrwxrwxrwx. 1 root root 0 Jun 1 00:22 /sys/class/scsi_host/host2 -> ../../devices/pci0000:00/0000:00:1f.2/ata3/host2/scsi_host/host2 % cat /sys/class/scsi_host/host2/unique_id 3 The "parentaddr" and "name" attributes are mutually exclusive to identify the SCSI host number. Use of the "parentaddr" element will be the preferred mechanism. This patch only supports to parse and format the XMLs. Later patches will add code to find out the scsi host number.
-
由 Osier Yang 提交于
Preparation for future patches by creating a scsi_host union. For now, just the 'name' will be present.
-
由 John Ferlan 提交于
Rather than assume that NOT FC_HOST is SCSI_HOST, let's call them out specifically. Makes it easier to find SCSI_HOST code/structs and ensures something isn't missed in the future
-
由 Peter Krempa 提交于
Gluster volumes don't start with a leading slash. Our schema for netfs gluster pools enforces it though. Luckily mount.glusterfs skips it. Allow a slashless volume name for glusterfs netfs mounts in the schema. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1101999
-
- 21 7月, 2014 7 次提交
-
-
由 Peter Krempa 提交于
Be more clear that the "<channel mode=" attribute overrides the default set by "defaultMode". Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1033704
-
由 Peter Krempa 提交于
Commit 5df81317 forgot to adjust a few callers of virStrToLong_ui to ignore the returned value in some ancient parts of the code.
-
由 Peter Krempa 提交于
We do so in the vast majority of places, so there's no problem of adding the attribute to enforce it by the complier and fix a few leftover places. This was originally pointed out by Coverity as a recent change triggered it's warning that our code checked the vast majority of returns from virStrToLong_ui.
-
由 Peter Krempa 提交于
Use the virTypedParamsFree unconditionally as it handles NULL well and has the benefit of freeing a typed parameter array even if it wasn't yet assigned, but only allocated.
-
由 Peter Krempa 提交于
max_id could be used uninitialized in the cleanup section after the domain wasn't found. Discovered by Coverity.
-
由 Peter Krempa 提交于
Report errors on some states snapshots done by qemu should never reach
-
由 Peter Krempa 提交于
Convert the target snapshot state selector to a switch statement enumerating all possible values. This points out a few mistakes in the original selector. The logic of the code is preserved until later patches.
-
- 19 7月, 2014 2 次提交
-
-
由 Roman Bogorodskiy 提交于
Try to reconnect to the running domains after libvirtd restart. To achieve that, do: * Save domain state - Modify virBhyveProcessStart() to save domain state to the state dir - Modify virBhyveProcessStop() to cleanup the pidfile and the state * Detect if the state information loaded from the driver's state dir matches the actual state. Consider domain active if: - PID it points to exist - Process title of this PID matches the expected one with the domain name Otherwise, mark the domain as shut off. Note: earlier development bhyve versions before FreeBSD 10.0-RELEASE didn't set proctitle we expect, so the current code will not detect it. I don't plan adding support for this unless somebody requests this.
-
由 Hu Tao 提交于
libvirt supports pci domain already, so update the documentation. Otherwise users who lookup the documentation for how to use hostdev may miss the domain and encounter error when pass-through a pci device in a domain other than 0. Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
-
- 18 7月, 2014 8 次提交
-
-
由 Peter Krempa 提交于
As with the local SCSI passthrough devicesm qemu can't support snapshots on those as the block ops are handled by the device. This is also true for iSCSI backing of the disk. Remove the check for the local block device and just forbid snapshot when the disk is of type 'lun'. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1073368
-
由 Peter Krempa 提交于
Disk type 'lun' enables SCSI command passthrough for a disk. We stated that it works only with "block" disks. Qemu supports it also when using the iSCSI protocol.
-
由 Michal Privoznik 提交于
There's this question on the list that is asked over and over again. How do I get {cpu, memory, ...} usage in percentage? Or its modified version: How do I plot nice graphs like virt-manager does? It would be nice if we have an example to inspire people. And that's what domtop should do. Yes, it could be written in different ways, but I've chosen this one as I think it show explicitly what users need to implement in order to imitate virt-manager's graphing. Note: The usage is displayed from host perspective. That is, how much host CPUs the domain is using. But it should be fairly simple to switch do just guest CPU usage if needed. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
There's no need to use it since we have this shiny functions that even checks for conversion and overflow errors. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Cédric Bosdonnat 提交于
-
由 Cédric Bosdonnat 提交于
LXC network devices can now be assigned a custom NIC device name on the container side. For example, this is configured with: <interface type='network'> <source network='default'/> <guest dev="eth1"/> </interface> In this example the network card will appear as eth1 in the guest.
-
由 Jiri Denemark 提交于
Decisions whether qemu driver and libvirt-daemon-{qemu,kvm} packages should be built on various OS/arch combinations were scattered around the spec file. Let's make it easier to see where qemu driver is going to be built.
-
由 John Ferlan 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1091866 Add a new boolean 'sparse'. This will be used by the logical backend storage driver to determine whether the target volume is sparse or not (also known by a snapshot or thin logical volume). Although setting sparse to true at creation could be seen as duplicitous to setting during virStorageBackendLogicalMakeVol() in case there are ever other code paths between Create and FindLVs that need to know about the volume be sparse. Use the 'sparse' in a new virStorageBackendLogicalVolWipe() to decide whether to attempt to wipe the logical volume or not. For now, I have found no means to wipe the volume without writing to it. Writing to the sparse volume causes it to be filled. A sparse logical volume is not completely writeable as there exists metadata which if overwritten will cause the sparse lv to go INACTIVE which means pool-refresh will not find it. Access to whatever lvm uses to manage data blocks is not provided by any API I could find.
-