QEMU is the preferred spelling used on QEMU website.
Signed-off-by: NJán Tomko <jtomko@redhat.com>

This reverts commit 038eb472.

On reflection adding defaults for arbitrary guest XML device config
settings to the qemu.conf is not a sustainable path. Removing the
support for rx/tx queue size so that it doesn't set a bad precedent.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

In 2074ef6c and c56cdf25 (and friends) we've added two
attributes to virtio NICs: rx_queue_size and tx_queue_size.
However, sysadmins might want to set these on per-host basis but
don't necessarily have an access to domain XML (e.g. because they
are generated by some other app). So let's expose them under
qemu.conf (the settings from domain XML still take precedence as
they are more specific ones).
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1458630

Apparantly commit id 'dc4c2f75' wasn't specific enough, so here's
a few more clarifications.

Add a new TLS X.509 certificate type - "vxhs". This will handle the
creation of a TLS certificate capability for properly configured
VxHS network block device clients.

The following describes the behavior of TLS for VxHS block device:

  (1) Two new options have been added in /etc/libvirt/qemu.conf
      to control TLS behavior with VxHS block devices
      "vxhs_tls" and "vxhs_tls_x509_cert_dir".
  (2) Setting "vxhs_tls=1" in /etc/libvirt/qemu.conf will enable
      TLS for VxHS block devices.
  (3) "vxhs_tls_x509_cert_dir" can be set to the full path where the
      TLS CA certificate and the client certificate and keys are saved.
      If this value is missing, the "default_tls_x509_cert_dir" will be
      used instead. If the environment is not configured properly the
      authentication to the VxHS server will fail.
Signed-off-by: NAshish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1458630

Introduce virQEMUDriverConfigTLSDirResetDefaults in order to check
if the defaultTLSx509certdir was changed, then change the default
for any other *TLSx509certdir that was not set to the default default.

Introduce virQEMUDriverConfigValidate to validate the existence of
any of the *_tls_x509_cert_dir values that were uncommented/set,
incuding the default.

Update the qemu.conf description for default to describe the consequences
if the default directory path does not exist.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add a path for UEFI VMs for AArch32 VMs, based on the path Debian is using.
libvirt is the de facto canonical location for defining where distros
should place these firmware images, so let's define this path here to try
and minimize distro fragmentation.

Update the descriptions to match the migrate option.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add a new TLS X.509 certificate type - "migrate". This will handle the
creation of a TLS certificate capability (and possibly repository) to
be used for migrations. Similar to chardev's, credentials will be handled
via a libvirt secrets; however, unlike chardev's enablement and usage
will be via a CLI flag instead of a conf flag and a domain XML attribute.

The migrations using the *x509_verify flag require the client-cert.pem
and client-key.pem files to be present in the TLS directory - so let's
also be sure to note that in the qemu.conf file.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

QEMU should be written all upper or all lower case.

So far, we are allowing /dev/vfio/vfio in the devices cgroup
unconditionally (and creating it in the namespace too). Even if
domain has no hostdev assignment configured. This is potential
security hole. Therefore, when starting the domain (or
hotplugging a hostdev) create & allow /dev/vfio/vfio too (if
needed).
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>

Add new parameter memory_backing_dir where files will be stored when memoryBacking
source is selected as file.

Value is stored inside char* memoryBackingDir

Given how intrusive previous patches are, it might happen that
there's a bug or imperfection. Lets give users a way out: if they
set 'namespaces' to an empty array in qemu.conf the feature is
suppressed.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

After a944bd92 we gained support for setting gluster debug level.
However, due to a space we haven't tested whether augeas file
actually works.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This helps in selecting log level of the gluster gfapi, output to stderr.
The option is 'gluster_debug_level', can be tuned by editing
'/etc/libvirt/qemu.conf'

Debug levels ranges 0-9, with 9 being the most verbose, and 0
representing no debugging output.  The default is the same as it was
before, which is a level of 4.  The current logging levels defined in
the gluster gfapi are:

    0 - None
    1 - Emergency
    2 - Alert
    3 - Critical
    4 - Error
    5 - Warning
    6 - Notice
    7 - Info
    8 - Debug
    9 - Trace
Signed-off-by: NPrasanna Kumar Kalever <prasanna.kalever@redhat.com>
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Add a new qemu.conf variables to store the UUID for the secret that could
be used to present credentials to access the TLS chardev.  Since this will
be a server level and it's possible to use some sort of default, introduce
both the default and chardev logic at the same time making the setting of
the chardev check for it's own value, then if not present checking whether
the default value had been set.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add a new TLS X.509 certificate type - "chardev". This will handle the
creation of a TLS certificate capability (and possibly repository) for
properly configured character device TCP backends.

Unlike the vnc and spice there is no "listen" or "passwd" associated. The
credentials eventually will be handled via a libvirt secret provided to
a specific backend.

Make use of the default verify option as well.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Rather than specify perhaps multiple TLS X.509 certificate directories,
let's create a "default" directory which can then be used if the service
(e.g. for now vnc and spice) does not supply a default directory.

Since the default for vnc and spice may have existed before without being
supplied, the default check will first check if the service specific path
exists and if so, set the cfg entry to that; otherwise, the default will
be set to the (now) new defaultTLSx509certdir.

Additionally add a "default_tls_x509_verify" entry which can also be used
to force the peer verification option (for vnc it's a x509verify option).
Add/alter the macro for the option being found in the config file to accept
the default value.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

We already have the ability to turn off dumping of guest
RAM via the domain XML. This is not particularly useful
though, as it is under control of the management application.
What is needed is a way for the sysadmin to turn off guest
RAM defaults globally, regardless of whether the mgmt app
provides its own way to set this in the domain XML.

So this adds a 'dump_guest_core' option in /etc/libvirt/qemu.conf
which defaults to false. ie guest RAM will never be included in
the QEMU core dumps by default. This default is different from
historical practice, but is considered to be more suitable as
a default because

 a) guest RAM can be huge and so inflicts a DOS on the host
    I/O subsystem when dumping core for QEMU crashes

 b) guest RAM can contain alot of sensitive data belonging
    to the VM owner. This should not generally be copied
    around inside QEMU core dumps submitted to vendors for
    debugging

 c) guest RAM contents are rarely useful in diagnosing
    QEMU crashes
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Currently the QEMU processes inherit their core dump rlimit
from libvirtd, which is really suboptimal. This change allows
their limit to be directly controlled from qemu.conf instead.

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

This moves the socket generation if "vnc_auto_unix_socket" is set.

It also fixes a bug with this config option that we should auto-generate
socket path only if listen type is address and there is no address
specified.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Currently the QEMU stdout/stderr streams are written directly to
a regular file (eg /var/log/libvirt/qemu/$GUEST.log). While those
can be rotated by logrotate (using copytruncate option) this is
not very efficient. It also leaves open a window of opportunity
for a compromised/broken QEMU to DOS the host filesystem by
writing lots of text to stdout/stderr.

This makes it possible to connect the stdout/stderr file handles
to a pipe that is provided by virtlogd. The virtlogd daemon will
read from this pipe and write data to the log file, performing
file rotation whenever a pre-determined size limit is reached.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Well, even though users can pass the list of UEFI:NVRAM pairs at the
configure time, we may maintain the list of widely available UEFI
ourselves too. And as arm64 begin to rises, OVMF was ported there too.
With a slight name change - it's called AAVMF, with AAVMF_CODE.fd
being the UEFI firmware and AAVMF_VARS.fd being the NVRAM store file.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

When enabling the migration_address option, by default it is
set to "127.0.0.1", but it's not a valid address for migration.
so we should add verification and set the default migration_address
to "0.0.0.0".
Signed-off-by: NChen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

This patch adds support for RDMA protocol in migration URIs.

USAGE: $ virsh migrate --live --migrateuri rdma://hostname domain qemu+ssh://hostname/system

Since libvirt runs QEMU in a pretty restricted environment, several
files needs to be added to cgroup_device_acl (in qemu.conf) for QEMU to
be able to access the host's infiniband hardware. Full documenation of
the feature can be found on QEMU wiki:
http://wiki.qemu.org/Features/RDMALiveMigrationSigned-off-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

When using split UEFI image, it may come handy if libvirt manages per
domain _VARS file automatically. While the _CODE file is RO and can be
shared among multiple domains, you certainly don't want to do that on
the _VARS file. This latter one needs to be per domain. So at the
domain startup process, if it's determined that domain needs _VARS
file it's copied from this master _VARS file. The location of the
master file is configurable in qemu.conf.

Temporary, on per domain basis the location of master NVRAM file can
be overridden by this @template attribute I'm inventing to the
<nvram/> element. All it does is holding path to the master NVRAM file
from which local copy is created. If that's the case, the map in
qemu.conf is not consulted.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>

There are multiple mount points after commit 725a211f, but one comment
wasn't changed to use plurals.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Use better detection of hugetlbfs mount points. Yes, there can be
multiple mount points each serving different huge page size.

Since we already have ability to override the mount point in the
qemu.conf file, this crazy backward compatibility code is brought in.
Now we allow multiple mount points, so the "hugetlbfs_mount" option
must take an list of strings (mount points). But previously, it was
just a string, so we must accept both types now.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

For now, we set the migration URI via command line '--migrate_uri' or
construct the URI by looking up the dest host's hostname which could be
solved by DNS automatically.

But in cases the dest host have two or more NICs to reach, we may need to
send the migration data over a specific NIC which is different from the
automatically resolved one for some reason like performance, security, etc.
Thus we must explicitly specify the migrateuri in command line everytime,
but it is too troublesome if there are many such hosts (and don't forget
virt-manager).

This patch adds a configuration file option on dest host to save the
default value set which can be specified to a migration hostname or
one of this host's addresses used for transferring data, thus user doesn't
have to specify it in command line everytime.
Signed-off-by: NChen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

QEMU commit 5e2ac51 added a boolean '-msg timestamp=[on|off]'
option, which can enable timestamps on errors:
$ qemu-system-x86_64 -msg timestamp=on zghhdorf
2014-04-09T13:25:46.779484Z qemu-system-x86_64: -msg timestamp=on: could
not open disk image zghhdorf: Could not open 'zghhdorf': No such file or
directory

Enable this timestamp if the QEMU binary supports it.

Add a 'log_timestamp' option to qemu.conf for disabling this behavior.

When I played with virtlockd I was stunned by lacking
documentation. My frustration got bigger when I had to
read the patches to get the correct value to set in
qemu.conf.

Moreover, from pure libvirt-pride  I'm changing commented
value from sanlock to lockd. We want to favor our own
implementation after all.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Noticed a misuse of 'to' while testing my event regression under
polkit ACLs, and decided to review the entire conf files for
other legibility bugs.

* daemon/libvirtd.conf: Use correct grammar.
* src/qemu/qemu.conf: Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Fix some user-visible wording from commits 72aafe9c and 1606d89c.

* src/qemu/qemu.conf (migration_address): Better wording.
* include/libvirt/libvirt.h.in (VIR_MIGRATE_PARAM_LISTEN_ADDRESS):
Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1019053

QEMU has support for SASL auth for SPICE guests, but libvirt
has no way to enable it. Following the example from VNC where
it is globally enabled via qemu.conf
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The regular save image code has the support to compress images using a
specified algorithm. This was not implemented for external checkpoints
although it shares most of the backend code.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1017227

The regular save image code has the support to compress images using a
specified algorithm. This was not implemented for managed save although
it shares most of the backend code.