Without this fix, ./configure --with-libpcap will cause --with-libpcap=yes
to be implicitly passed down, which cause yes/bin/pcap-config to be
searched for rather than /usr/bin/pcap-config.

Also output pcap: no when pcap is not found or disabled.

Currently, all of domain "save/dump/managed save/migration"
use the same function "qemudDomainWaitForMigrationComplete"
to wait the job finished, but the error messages are all
about "migration", e.g. when a domain saving job is canceled
by user, "migration was cancled by client" will be throwed as
an error message, which will be confused for user.

As a solution, intoduce two new job types(QEMU_JOB_SAVE,
QEMU_JOB_DUMP), and set "priv->jobActive" to "QEMU_JOB_SAVE"
before saving, to "QEMU_JOB_DUMP" before dumping, so that we
could get the real job type in
"qemudDomainWaitForMigrationComplete", and give more clear
message further.

And as It's not important to figure out what's the exact job
is in the DEBUG and WARN log, also we don't need translated
string in logs, simply repace "migration" with "job" in some
statements.

* src/qemu/qemu_driver.c

The "Default-Stop" field in LSB comment in libvirt-guests is missing and should
be added. I also suggests to add runlevel 2 to the "Default-Start" field.

--
Laurent Léonard

* daemon/libvirtd.c (qemudFreeClient): Avoid a leak.
(qemudDispatchServer): Avoid null dereference.

Current code does not pass VM mac address to a 802.1Qbh direct attach
interface using IFLA_VF_MAC.  This patch adds support in macvtap code to
send IFLA_VF_MAC netlink request during port profile association on a
802.1Qbh interface.

Stefan Cc'ed for comments because this patch changes a condition for
802.1Qbg

802.1Qbh support for IFLA_VF_MAC in enic driver has been posted and is
pending acceptance at http://marc.info/?l=linux-netdev&m=129185244410557&w=2

* src/util/command.h (virCommandAddArgBuffer)
(virCommandAddEnvBuffer): New prototypes.
* src/util/command.c (virCommandAddArgBuffer)
(virCommandAddEnvBuffer): Implement them.
* src/libvirt_private.syms (command.h): Export them.
* src/qemu/qemu_conf.c (qemudBuildCommandLine): Use them, plugging
a memory leak on rbd_hosts in the process.

* src/conf/domain_conf.c (virDomainGraphicsDefParseXML)
(virDomainDeviceVirtioSerialAddressParseXML)
(virDomainDiskDefFree): Free various leaks.

* tests/qemuxml2argvtest.c (testCompareXMLToArgvFiles): Don't
allocate, since we don't use virDomainChrDefFree.

* src/util/util.c (__virExec): Don't use FD_ISSET on out-of-bounds fd.

This is pretty straightforward - even though dnsmasq gets daemonized
and uses a pid file, those things are both handled by the dnsmasq
binary itself. And libvirt doesn't need any of the output of the
dnsmasq command either, so we just setup the args and call
virRun(). Mainly it was just a (mostly) mechanical job of replacing
the APPEND_ARG() macro (and some other *printfs()) with
virCommandAddArg*().

Instead of just reporting that a task failed get the
localized message from the TaskInfo error and include
it in the reported error message.

Implement minimal deserialization support for the
MethodFault type in order to obtain the actual fault
type.

For example, this changes the reported error message
when trying to create a volume with zero size from

  Could not create volume

to

  Could not create volume: InvalidArgument - A specified parameter was not correct.

Not perfect yet, but better than before.

* src/util/command.c (virCommandFree): Free data from
virCommandSetInputBuffer.

* tests/Makefile.am (SUBDIRS): Add commanddata.
* tests/commandtest.c (checkoutput): Delete correct file.
(test4): Delete pid file.
(mymain): Delete unused variable.
* tests/commanddata/Makefile.am: New file.
* configure.ac (AC_OUTPUT): Build new makefile.
Reported by Dominik Klein.

The xml watchdog dump option is converted to qemu watchdog pause arg
but it is not reasonable to convert it back from qemu watchdog pause
arg since there already is a xml watchdog pause option, so a test for
the dump option to convert it from arg to xml is not added.

starting a service during rpm installation is impolite. It is even worse if done
during upgrade, for a service that was explicitly turned off.

Signed-off-by: NJosh Durgin <joshd@hq.newdream.net>

Changes common to all network disks:
-Make source name optional in the domain schema, since NBD doesn't use it
-Add a hostName type to the domain schema, and use it instead of genericName, which doesn't include .
-Don't leak host names or ports
-Set the source protocol in qemuParseCommandline
Signed-off-by: NJosh Durgin <joshd@hq.newdream.net>

This patch adds network disk support to libvirt/QEMU.  The currently
supported protocols are nbd, rbd, and sheepdog.  The XML syntax is like
this:

    <disk type="network" device="disk">
      <driver name="qemu" type="raw" />
      <source protocol='rbd|sheepdog|nbd' name="...some image identifier...">
        <host name="mon1.example.org" port="6000">
        <host name="mon2.example.org" port="6000">
        <host name="mon3.example.org" port="6000">
      </source>
      <target dev="vda" bus="virtio" />
    </disk>
Signed-off-by: NMORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>

The signal's name is wrong...
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>

`dump' watchdog action lets libvirtd to dump the guest when receives a
watchdog event (which probably means a guest crash)

Currently only qemu is supported.

This patch prepares for the next patch.

* src/util/threadpool.c, src/util/threadpool.h: Thread pool
  implementation
* src/Makefile.am: Build thread pool
* src/libvirt_private.syms: Export public functions

* src/util/command.c (virCommandRun): Fix yesterday's regression
on logging, and avoid leaking log-only output captures.
Reported by Hu Tao.

When we get an EOF event on monitor connection, it may be a result of
either crash or graceful shutdown. QEMU which supports async events
(i.e., we are talking to it using JSON monitor) emits SHUTDOWN event on
graceful shutdown. In case we don't get this event by the time monitor
connection is closed, we assume the associated domain crashed.

Currently libvirt doesn't confirm whether the guest has responded to the
disk removal request.  In some cases this can leave the guest with
continued access to the device while the mgmt layer believes that it has
been removed.  With a recent qemu monitor command[1] we can
deterministically revoke a guests access to the disk (on the QEMU side)
to ensure no futher access is permitted.

This patch adds support for the drive_del() command and introduces it
in the disk removal paths.  If the guest is running in a QEMU without this
command we currently explicitly check for unknown command/CommandNotFound
and log the issue.

If QEMU supports the command we issue the drive_del command after we attempt
to remove the device.  The guest may respond and remove the block device
before we get to attempt to call drive_del.  In that case, we explicitly check
for 'Device not found' from the monitor indicating that the target drive
was auto-deleted upon guest responds to the device removal notification.

1. http://thread.gmane.org/gmane.comp.emulators.qemu/84745Signed-off-by: NRyan Harper <ryanh@us.ibm.com>

Currently libvirt doesn't confirm whether the guest has responded to the
disk removal request.  In some cases this can leave the guest with
continued access to the device while the mgmt layer believes that it has
been removed.  With a recent qemu monitor command[1] we can
deterministically revoke a guests access to the disk (on the QEMU side)
to ensure no futher access is permitted.

This patch adds support for the drive_unplug() command and introduces it
in the disk removal paths.  There is some discussion to be had about how
to handle the case where the guest is running in a QEMU without this
command (and the fact that we currently don't have a way of detecting
what monitor commands are available).

Changes since v2:
 - use VIR_ERROR to report when unplug command not found
Changes since v1:
 - return > 0 when command isn't present, < 0 on command failure
 - detect when drive_unplug command isn't present and log error
   instead of failing entire command
Signed-off-by: NRyan Harper <ryanh@us.ibm.com>

The extra data isn't being free()'d for IO error events that have a reason.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

- qemudDomainAttachPciControllerDevice: Don't build "devstr"
  if "-device" of qemu is not available, as "devstr" will only
  be used by "qemuMonitorAddDevice", which depends on "-device"
  argument of qemu is supported.

- "qemudDomainSaveImageOpen": Fix indent problem.

* src/qemu/qemu_driver.c

Commit febc5916 introduced -vga none in
case no video card is included in domain XML. However, old qemu
versions do not support this and such domain cannot be successfully
started.

The new version lists every virsh command, its description, and
the version of libvirt where it became available.

This fixes a misleading error message saying the libnl package
needs to be installed, when it's really the libnl-devel package
needing to be installed.

* .gnulib: Update to latest, for at least a stdint.h fix
* src/storage/storage_driver.c (storageVolumeZeroSparseFile)
(storageWipeExtent): Use better type, although it still triggers
spurious -Wformat warning on MacOS's gcc.

* src/openvz/openvz_conf.c (openvzLoadDomains): Replace unsafe
sscanf with safe direct parsing.
(openvzGetVEID): Avoid lost integer overflow detection.
(openvzAssignUUIDs): Likewise, and detect readdir failure.

popen must be matched with pclose (not fclose), or it will leak
resources.  Furthermore, it is a lousy interface when it comes to
signal handling.  We're much better off using our decent command
wrapper.  Note that virCommand guarantees that VIR_FREE(outbuf) is
both required and safe to call, whether virCommandRun succeeded or
failed.

* src/openvz/openvz_conf.c (openvzLoadDomains, openvzGetVEID):
Replace popen with virCommand usage.

Guarantee that outbuf/errbuf are allocated on success, even if to the
empty string.  Caller always has to free the result, and empty output
check requires checking if *outbuf=='\0'.  Makes the API easier to use
safely.  Failure is best effort allocation (some paths, like
out-of-memory, cannot allocate a buffer, but most do), so caller must
free buffer on failure.

* docs/internals/command.html.in: Update documentation.
* src/util/command.c (virCommandSetOutputBuffer)
(virCommandSetErrorBuffer, virCommandProcessIO) Guarantee empty
string on no output.
* tests/commandtest.c (test17): New test.