tools/virsh-domain-monitor.c
   * Introduce new command : domifaddr
     Usage: domifaddr <domain> [interface] [--full] [--source lease|agent]

     Example outputs:
     virsh # domifaddr f20
     Name       MAC address          Protocol     Address
     -------------------------------------------------------------------------------
     lo         00:00:00:00:00:00    ipv4         127.0.0.1/8
     -          -                    ipv6         ::1/128
     vnet0      52:54:00:2e:45:ce    ipv4         10.1.33.188/24
     -          -                    ipv6         2001:db8:0:f101::2/64
     -          -                    ipv6         fe80::5054:ff:fe2e:45ce/64
     vnet1      52:54:00:b1:70:19    ipv4         192.168.105.201/16
     -          -                    ipv4         192.168.201.195/16
     -          -                    ipv6         fe80::5054:ff:feb1:7019/64
     vnet2      52:54:00:36:2a:e5    N/A          N/A
     vnet3      52:54:00:20:70:3d    ipv4         192.168.105.240/16
     -          -                    ipv6         fe80::5054:ff:fe20:703d/64

     virsh # domifaddr f20 eth1 --source lease
     Name       MAC address          Protocol     Address
     -------------------------------------------------------------------------------
     vnet1      52:54:00:b1:70:19    ipv4         192.168.105.201/16
     -          -                    ipv4         192.168.201.195/16
     -          -                    ipv6         fe80::5054:ff:feb1:7019/64

     virsh # domifaddr f20 eth0 --source agent --full
     Name       MAC address          Protocol     Address
     -------------------------------------------------------------------------------
     eth0       52:54:00:2e:45:ce    ipv4         10.1.33.188/24
     eth0       52:54:00:2e:45:ce    ipv6         2001:db8:0:f101::2/64
     eth0       52:54:00:2e:45:ce    ipv6         fe80::5054:ff:fe2e:45ce/64

tools/virsh.pod
   * Document new command
Signed-off-by: NNehal J Wani <nehaljw.kkd1@gmail.com>

By querying the qemu guest agent with the QMP command
"guest-network-get-interfaces" and converting the received JSON
output to structured objects.

Although "ifconfig" is deprecated, IP aliases created by "ifconfig"
are supported by this API. The legacy syntax of an IP alias is:
"<ifname>:<alias-name>". Since we want all aliases to be clubbed
under parent interface, simply stripping ":<alias-name>" suffices.
Note that IP aliases formed by "ip" aren't visible to "ifconfig",
and aliases created by "ip" do not have any specific name. But
we are lucky, as qemu guest agent detects aliases created by both.

src/qemu/qemu_agent.h:
  * Define qemuAgentGetInterfaces

src/qemu/qemu_agent.c:
  * Implement qemuAgentGetInterface

src/qemu/qemu_driver.c:
  * New function qemuGetDHCPInterfaces
  * New function qemuDomainInterfaceAddresses

src/remote_protocol-sructs:
  * Define new structs

tests/qemuagenttest.c:
  * Add new test: testQemuAgentGetInterfaces
    Test cases for IP aliases, 0 or multiple ipv4/ipv6 address(es)
Signed-off-by: NNehal J Wani <nehaljw.kkd1@gmail.com>

daemon/remote.c
   * Define remoteSerializeDomainInterface, remoteDispatchDomainInterfaceAddresses

src/remote/remote_driver.c
   * Define remoteDomainInterfaceAddresses

src/remote/remote_protocol.x
   * New RPC procedure: REMOTE_PROC_DOMAIN_INTERFACE_ADDRESSES
   * Define structs remote_domain_ip_addr, remote_domain_interface,
     remote_domain_interfaces_addresse_args, remote_domain_interface_addresses_ret
   * Introduce upper bounds (to handle DoS attacks):
     REMOTE_DOMAIN_INTERFACE_MAX = 2048
     REMOTE_DOMAIN_IP_ADDR_MAX = 2048
     Restrictions on the maximum number of aliases per interface were
     removed after kernel v2.0, and theoretically, at present, there
     are no upper limits on number of interfaces per virtual machine
     and on the number of IP addresses per interface.

src/remote_protocol-structs
   * New structs added
Signed-off-by: NNehal J Wani <nehaljw.kkd1@gmail.com>

Define helper function virDomainInterfaceFree, which allows
the upper layer application to free the domain interface object
conveniently.

The API is going to provide multiple methods by flags, e.g.
  * Query guest agent
  * Parse DHCP lease file

include/libvirt/libvirt-domain.h
  * Define virDomainInterfaceAddresses, virDomainInterfaceFree
  * Define structs virDomainInterface, virDomainIPAddress

src/driver-hypervisor.h:
  * Define domainInterfaceAddresses

src/libvirt-domain.c:
  * Implement virDomainInterfaceAddresses
  * Implement virDomainInterfaceFree

src/libvirt_public.syms:
  * Export the new symbols
Signed-off-by: NNehal J Wani <nehaljw.kkd1@gmail.com>

Failures of parallelsStorageOpen occured because we incorrectly treated
path to VM' configuration file as a directory. Now initialization of
parallels VM domains home directory is fixed.
Signed-off-by: NMaxim Nestratov <mnestratov@parallels.com>

Signed-off-by: NMaxim Nestratov <mnestratov@parallels.com>

Otherwise exporting existing domain config and defining a new one like this:
virsh -c parallels:///system dumpxml instance01 > my.xml
virsh -c parallels:///system define my.xml
leads to an error because PCS default x64 mode turns to x32.
Thus, we need to set correct cpuMode in prlsdkDoApplyConfig() explicitly.
Signed-off-by: NMikhail Feoktistov <mfeoktistov@parallels.com>
Signed-off-by: NMaxim Nestratov <mnestratov@parallels.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

We're parsing memballoon status period as unsigned int, but when we're
trying to set it, both we and qemu use signed int.  That means large
values will get wrapped around to negative one resulting in error.
Basically the same problem as commit e3a7b874 was dealing with when
updating live domain.

QEMU changed the accepted value to int64 in commit 1f9296b5, but even
values as INT_MAX don't make sense since the value passed means seconds.
Hence adding capability flag for this change isn't worth it.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1140958Signed-off-by: NLuyao Huang <lhuang@redhat.com>
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

In order not to leave old error messages set, this patch refactors the
code so the error is reported only when acted upon.  The only such place
already rewrites any error, so cleaning up all the error reporting in
qemuMonitorSetMemoryStatsPeriod() is enough.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

All the devices we have format their address as its last sub-element, so
let's change memballoon to follow suit.  Also adjust RNG to allow any
order of them so 'virsh edit' doesn't shout at us.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Change it so it really *always* eats the @toadd buffer.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Add $(top_builddir) paths to INCLUDES to fix VPATH build.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Wireshark supports pkg-config since 1.11.3.  Right now we build
wireshark-dissectior tool as default trough rpm build only on
fedora >= 21 and there is new wireshark that supports pkg-config.
If someone wants to build libvirt with wireshark-dissector against old
wireshark, they should specify the location by hand.

This patch is mainly to fix wrong dependency on wireshark binary as it
doesn't make sense to require that binary file to just get version info
of that package in makefile.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Commit 4ab8cd77 added a check requiring input devices to have
a bus type of VIR_DOMAIN_INPUT_BUS_USB, failing to start the
domain otherwise.  But virDomainDefParseXML adds implicit mouse
and keyboard if a graphics device is configured.  See calls to
virDomainDefMaybeAddInput.

The regression is fixed by removing the check requiring USB input
devices, and skipping non-USB input devices when populating USB
'usbdevice' in libxl_domain_build_info struct.

Patch 51f9f03a introduces a regression
where if a blockCommit operation fails the disk is still marked as being
part of a block job but can't be unmarked later.

Commit 4f25146b (v1.2.8) managed to silence Coverity, but at the
cost of a memory leak detected by valgrind:
==24129== 40 bytes in 5 blocks are definitely lost in loss record 355 of 637
==24129==    at 0x4A08B1C: realloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==24129==    by 0x5084B8E: virReallocN (viralloc.c:245)
==24129==    by 0x514D5AA: virDomainObjListExport (domain_conf.c:22200)
==24129==    by 0x201227DB: qemuConnectListAllDomains (qemu_driver.c:18042)
==24129==    by 0x51CC1B6: virConnectListAllDomains (libvirt-domain.c:6797)
==24129==    by 0x14173D: remoteDispatchConnectListAllDomains (remote.c:1580)
==24129==    by 0x121BE1: remoteDispatchConnectListAllDomainsHelper (remote_dispatch.h:1072)

In short, every time a client calls a ListAll variant and asks
for the resulting list, but there are 0 elements to return, we
end up leaking the 1-entry array that holds the NULL terminator.

What's worse, a read-only client can access these functions in a
tight loop to cause libvirtd to eventually run out of memory; and
this can be considered a denial of service attack against more
privileged clients.  Thankfully, the leak is so small (8 bytes per
call) that you would already have some other denial of service with
any guest calling the API that frequently, so an out-of-memory
crash is unlikely enough that this did not warrant a CVE.

* daemon/remote.c (remoteDispatchConnectListAllDomains)
(remoteDispatchDomainListAllSnapshots)
(remoteDispatchDomainSnapshotListAllChildren)
(remoteDispatchConnectListAllStoragePools)
(remoteDispatchStoragePoolListAllVolumes)
(remoteDispatchConnectListAllNetworks)
(remoteDispatchConnectListAllInterfaces)
(remoteDispatchConnectListAllNodeDevices)
(remoteDispatchConnectListAllNWFilters)
(remoteDispatchConnectListAllSecrets)
(remoteDispatchNetworkGetDHCPLeases): Plug leak.
Signed-off-by: NEric Blake <eblake@redhat.com>

This one is no longer necessary since the Vcpu and IOThreads API's share

Since both Vcpu and IOThreads code use the same API's, alter the naming
of the API's to remove the "Vcpu" specific reference

This one is no longer necessary since the Vcpu and IOThreads API's share

Since both Vcpu and IOThreads code use the same API's, alter the naming
of the API's to remove the "Vcpu" specific reference

Since both Vcpu and IOThreads code use the same API's, alter the naming
of the API's to remove the "Vcpu" specific reference

Since both Vcpu and IOThreads code use the same API's, alter the naming
of the API's to remove the "Vcpu" specific reference

Since both Vcpu and IOThreads code use the same API's, alter the naming
of the API's to remove the "Vcpu" specific reference

Since both Vcpu and IOThreads code use the same API's, alter the naming
of the API's to remove the "Vcpu" specific reference

Since both Vcpu and IOThreads code use the same API's, alter the naming
of the API's to remove the "Vcpu" specific reference

Since we're not specifically a vcpu related structure anymore...

As pointed out by jtomko in his review of the IOThreads pinning code:

http://www.redhat.com/archives/libvir-list/2015-March/msg00495.html

there are some comments sprinkled in indicating IOThreads were using
the same structure as the VcpuPin code...

This is the first patch of a few that will change the virDomainVcpuPin*
structures and code to just virDomainPin* - starting with the data
structure naming...

During his review of the iothreads pin setting code, Pavel noted that
there was a potential memory leak with respect to how the newVcpuPin
is handled and the goto endjob's in failure paths which would not free
the memory.  For reference, See:

http://www.redhat.com/archives/libvir-list/2015-March/msg00415.html

Now that the size of guest's memory can be inferred from the NUMA
configuration (if present) make it optional to specify <memory>
explicitly.

To make sure that memory is specified add a check that some form of
memory size was specified. One side effect of this change is that it is
no longer possible to specify 0KiB as memory size for the VM, but I
don't think it would be any useful to do so. (I can imagine embedded
systems without memory, just registers, but that's far from what libvirt
is usually doing).

Forbidding 0 memory for guests also fixes a few corner cases where 0 was
not interpreted correctly and caused failures. (Arguments for numad when
using automatic placement, size of the balloon). This fixes problems
described in https://bugzilla.redhat.com/show_bug.cgi?id=1161461

Test case changes are added to verify that the schema change and code
behave correctly.

Use the NUMA total instead of the configured size both in XML and for
uses in the code once NUMA is enabled for a domain.

One test case change is necessary as the rounding of the individual cell
sizes was not matching the rounding of the total size.

The memory sizes in qemu are aligned up to 1 MiB boundaries. There are
two places where this was done once for the total size and then for
individual NUMA cell sizes.

Add a function that will align the sizes in one place so that it's clear
where the sizes are aligned.

As there are two possible approaches to define a domain's memory size -
one used with legacy, non-NUMA VMs configured in the <memory> element
and per-node based approach on NUMA machines - the user needs to make
sure that both are specified correctly in the NUMA case.

To avoid this burden on the user I'd like to replace the NUMA case with
automatic totaling of the memory size. To achieve this I need to replace
direct access to the virDomainMemtune's 'max_balloon' field with
two separate getters depending on the desired size.

The two sizes are needed as:
1) Startup memory size doesn't include memory modules in some
hypervisors.
2) After startup these count as the usable memory size.

Note that the comments for the functions are future aware and document
state that will be present after a few later patches.

While qemu may be prepared to do this libvirt is not. Forbid the block
ops until we fix our code.

Surprisingly we did not grab a VM job when a block job finished and we'd
happily rewrite the backing chain data. This made it possible to crash
libvirt when queueing two backing chains tightly and other badness.

To fix it, add yet another handler to the helper thread that handles
monitor events that require a job.

We interpret port values as signed int (convert them from char *),
so if a negative value is provided in network disk's configuration,
we accept it as valid, however there's an 'unknown cause' error raised later.
This error is only accidental because we return the port value in the return code.
This patch adds just a minor tweak to the already existing check so we
reject negative values the same way as we reject non-numerical strings.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1163553

Valgrind detected a leak:

==17820== 102 (56 direct, 46 indirect) bytes in 1 blocks are definitely lost in loss record 479 of 646
==17820==    at 0x4A08946: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==17820==    by 0x508521A: virAllocVar (viralloc.c:560)
==17820==    by 0x50D9FCA: virObjectNew (virobject.c:193)
==17820==    by 0x50A4FD9: dnsmasqCapsNewEmpty (virdnsmasq.c:784)
==17820==    by 0x50A514E: dnsmasqCapsNewFromBinary (virdnsmasq.c:830)
==17820==    by 0x1B508287: networkStateInitialize (bridge_driver.c:666)

It looks like commit 172acef4 introduced the problem, because
networkGetDnsmasqCaps() increments the reference count but an
early exit never does a matching decrement.

* src/network/bridge_driver.c (networkStateCleanup): Plug leak.
Signed-off-by: NEric Blake <eblake@redhat.com>

Valgrind complained:

==3770== Syscall param ioctl(SIOCETHTOOL) points to uninitialised byte(s)
==3770==    at 0x919D407: ioctl (syscall-template.S:81)
==3770==    by 0x530FE7E: rpl_ioctl (ioctl.c:42)
==3770==    by 0x50CB433: virNetDevFeatureAvailable (virnetdev.c:2764)
==3770==    by 0x50CB6A7: virNetDevGetFeatures (virnetdev.c:2830)
==3770==    by 0x1F0E5347: udevProcessNetworkInterface (node_device_udev.c:722)
==3770==    by 0x1F0E689F: udevGetDeviceDetails (node_device_udev.c:1300)
==3770==    by 0x1F0E6E06: udevAddOneDevice (node_device_udev.c:1422)
==3770==    by 0x1F0E6FB8: udevProcessDeviceListEntry (node_device_udev.c:1464)
==3770==    by 0x1F0E70CF: udevEnumerateDevices (node_device_udev.c:1494)
==3770==    by 0x1F0E7BB4: nodeStateInitialize (node_device_udev.c:1806)
==3770==    by 0x51B4303: virStateInitialize (libvirt.c:777)
==3770==    by 0x11DEE7: daemonRunStateInit (libvirtd.c:906)
==3770==  Address 0x228e38d4 is on thread 12's stack
==3770==  in frame #2, created by virNetDevFeatureAvailable (virnetdev.c:2750)

* src/util/virnetdev.c (virNetDevFeatureAvailable): Initialize all
bytes of ifr.
Signed-off-by: NEric Blake <eblake@redhat.com>