It is better not to assume that newly created network should be
connected to a bridge with same name, but specify it explicitly
by PRL_USE_VNET_NAME_FOR_BRIDGE_NAME flag.
Signed-off-by: NMaxim Nestratov <mnestratov@virtuozzo.com>

We support only one IPv4 and one IPv6 default gateway.
If static IPs are not present in instance config,
then we switch on DHCP for this adapter.
PrlVmDevNet_SetAutoApply to makes necessary settings within guest OS
In linux case it creates network startup scripts
/etc/sysconfig/network-scripts/ifcfg-ethN and fills it with necessary
parameters.

Current version of SDK event dispatcing is incorrect. For most VM events (add,
delete etc) issuer type is PIE_DISPATCHER. Actually analyzing issuer type
doesn't have any benifints so this patch get rid of it. All dispatching is done
only on event type.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Function prlsdkGetStatsParam was missing a prototype or the static
keyword. I went with static since it built successfully.

Pushed as a build breaker fix.

Implemented counters:
 VIR_DOMAIN_MEMORY_STAT_SWAP_IN
 VIR_DOMAIN_MEMORY_STAT_SWAP_OUT
 VIR_DOMAIN_MEMORY_STAT_MINOR_FAULT
 VIR_DOMAIN_MEMORY_STAT_MAJOR_FAULT
 VIR_DOMAIN_MEMORY_STAT_AVAILABLE
 VIR_DOMAIN_MEMORY_STAT_ACTUAL_BALLOON
 VIR_DOMAIN_MEMORY_STAT_UNUSED

Comments.

1. Use vzDomObjFromDomainRef/virDomainObjEndAPI pair to get domain
object as we use prlsdkGetStatsParam. See previous statistics
comments.

2. Balloon statistics is not applicable to containers. Fault
statistics for containers not provided in PCS6 yet.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Comments.

Replace vzDomObjFromDomain/virObjectUnlock pair
to vzDomObjFromDomainRef/virDomainObjEndAPI as we
use prlsdkGetStatsParam. See previous statistics
comments.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Make net device lookup by mac return sdk handle
instead of quite ephemeral enumeration index. After
this change there is no need anymore in special
function of removing device by enumeration index.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Populate counters SDK currenly supports:
 rx_bytes
 rx_packets
 tx_bytes
 tx_packets

Comments.

Use vzDomObjFromDomainRef/virDomainObjEndAPI pair to get domain
object as we use prlsdkGetStatsParam that can release domain
object lock and thus we need a reference in case domain
is deleated meanwhile.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Honour our formatting style. Adjust indentation so it matches the
rest of our code.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

In the e6d180f0 commit the parallels driver was renamed to vz.
However, there was a commit merged later, which was sent to the list
before the rename. The other commit is 6de12b02. Fix all the
missing renames.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Remove braces around single-statement blocks in vz_sdk.c

In this patch we add VIR_DOMAIN_DEVICE_NET handlers implementation
for domainAttachDevice and domainDetachDevice callbacks.

As soon as we don't support this operation for hypervisor type domains,
we implement this functionality for containers only.

In detach procedure we find network device by MAC address.
Because PrlVmDevNet_GetMacAddress() returns MAC as a UTF-8 encoded
null-terminated string, we use memcmp() to compare it.
Also we remove corresponding virtual network by prlsdkDelNetAdapter call.

There was many errors in libvirt.log caused by prlsdkDelNet function because
job variable was always initialized as PRL_INVALID_HANDLE
In this patch job variable gets return value of PrlSrv_DeleteVirtualNetwork function()

We need to initialize buflen every time when we get network adapter's
friendly name because we call PrlVmDev_GetFriendlyName in a loop

This patch moves all src/parallels/parallels* files to vz/vz*
and fixes build accordingly.
No functional changes.
Signed-off-by: NMaxim Nestratov <mnestratov@parallels.com>

Here we stop referencing vz driver by different names
in error messages. 'parallels driver', 'Parallels Cloud
Server', 'Parallels driver' all become just 'vz driver'.
No functional changes. Only renaming and a bit of rewording.
Signed-off-by: NMaxim Nestratov <mnestratov@parallels.com>

This patch changes all parallels/vz driver structure and
function prefixes from parallels to vz.
No functional changes.
Signed-off-by: NMaxim Nestratov <mnestratov@parallels.com>

This patch fixes several formatting errors, which I
missed before pushing previous patches. Mostly because
of missing cppi package.

We are going to add block devices as disks for containers
not as filesystems.
Signed-off-by: NMaxim Nestratov <mnestratov@parallels.com>

As we can add disks based on block devices to containers and bus type
doesn't have any meaning here, let us report always SATA for them.
Signed-off-by: NMaxim Nestratov <mnestratov@parallels.com>

Since we are going to add block devices as root disks we have
to specify root mount point for boot block devices. But we
shouldn't do this if a filesystem disk with such
target mount point already exists.
Signed-off-by: NMaxim Nestratov <mnestratov@parallels.com>

Signed-off-by: NMaxim Nestratov <mnestratov@parallels.com>

Statistics provided through PCS SDK. As we have only async interface in SDK we
need to be subscribed to statistics in order to get it. Trivial solution on
every stat request to subscribe, wait event and then unsubscribe will lead to
significant delays in case of a number of successive requests, as the event
will be delivered on next PCS server notify cycle. On the other hand we don't
want to keep unnesessary subscribtion. So we take an hibrid solution to
subcsribe on first request and then keep a subscription while requests are
active. We populate cache of statistics on subscribtion events and use this
cache to serve libvirts requests.

 * Cache details.
Cache is just handle to last arrived event, we call this cache
as if this handle is valid it is used to serve synchronous
statistics requests. We use number of successive events count
to detect that user lost interest to statistics. We reset this
count to 0 on every request. If more than PARALLELS_STATISTICS_DROP_COUNT
successive events arrive we unsubscribe. Special value of -1
of this counter is used to differentiate between subscribed/unsubscribed state
to protect from delayed events.

Values of PARALLELS_STATISTICS_DROP_COUNT and PARALLELS_STATISTICS_TIMEOUT are
just drop-ins, choosen without special consideration.

 * Thread safety issues
Use parallelsDomObjFromDomainRef in parallelsDomainBlockStats as
we could wait on domain lock down on stack in prlsdkGetStatsParam
and if we won't keep reference we could get dangling pointer
on return from wait.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@parallels.com>

2 reasons to to this.
1. PCS SDK really don't care of handler return value.
2. It hard to imagine how notifier can handle
subscriber failures. Even if there are some situations
we probably will use some special error codes and
not just throw error codes we get from SDK itself.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@parallels.com>

Use issuer type instead of event type to group
vm related events. This saves us from
explicit enumeration of all vm event types in
prlsdkHandleVmEvent.

We remember driver name in a new field 'drivername' within
private parallels connection structure. When a new domain
is defined we use this name to set corresponding virtType.
We set VIR_DOMAIN_VIRT_VZ for 'vz' driver and
VIR_DOMAIN_VIRT_PARALLELS for 'Parallels'.
Signed-off-by: NMaxim Nestratov <mnestratov@parallels.com>

It is necessary to have unpolluted screen when connecting to
parallels driver via virsh.
Otherwise a lot of unexpected output one will get on the console.
Signed-off-by: NMaxim Nestratov <mnestratov@parallels.com>

Cleanup code in prlsdkLoadDomain doesn't take into account the fact
if private domain structure along with freeing function is assigned
or not. In case it is, we shouldn't call it manually because
virDomainObjListRemove calls it and frees pdom.
Also, allocated def structure should be freed only if it's not
assigned to domain. Otherwise it will be called twice: one time by
virDomainObjListRemove and the second by prlsdkLoadDomain itself.
Signed-off-by: NMaxim Nestratov <mnestratov@parallels.com>

It is better to get all necessary parameters and check them on newly
created configuration before actually creating a domain with them or
applying them to an existing domain.
Signed-off-by: NMaxim Nestratov <mnestratov@parallels.com>

So far, we are not reporting if numatune was even defined. The
value of zero is blindly returned (which maps onto
VIR_DOMAIN_NUMATUNE_MEM_STRICT). Unfortunately, we are making
decisions based on this value. Instead, we should not only return
the correct value, but report to the caller if the value is valid
at all.

For better viewing of this patch use '-w'.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

We have a lot of passing arguments code just to pass connection
object cause it holds jobTimeout. Taking into account that
right now this value is defined at compile time let's just
get rid of it and make arguments list more clear in many
places.

In case we later need some runtime configurable timeout
value we can provide this value through arguments
function already operate such as a parallels domain
object etc as this timeouts are operation( and thus
object) specific in practice.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@parallels.com>

New functions utilize previosly added prlsdkDelDisk and prlsdkGetDiskIndex
Signed-off-by: NMaxim Nestratov <mnestratov@parallels.com>

Signed-off-by: NMaxim Nestratov <mnestratov@parallels.com>

Since net->model is not defined for containers we shouldn't touch it.
In case network adapter model is defined, a warning about ignoring
it is shown.
Signed-off-by: NMaxim Nestratov <mnestratov@parallels.com>

Instead of each API copying the same lines of code, lets use the
generic function designed just for that purpose.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

In Parallels we do not support device name hints
aka <target dev=../> option and full-fledged device
disk device addressing through
<address type=.. controller=.. bus=.. target=.. unit=../>
and have only one index instead.
In this situation to be consistent we can only take
one-to-one mapping from some reasonable subset
of full address. Values outside this subset are
invalid to create Parallels VMs.

Reasonable mapping is default one defined in virDomainDiskDefAssignAddress.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@parallels.com>

Parallels Cloud Server supports block devices and virtual NIC
live attachment. I implemented that function for block devices so
OpenStack volume attachment is now works.
Signed-off-by: NAlexander Burluka <aburluka@parallels.com>

OpenStack needs disk serial number setup because
nova boot --block-device-mapping command generates that param in
libvirt xml. I took QEMU libvirt driver behavior as a base.
QEMU driver skips inability to set serial and continues work.
So Parallels driver will ignore this param too and let domain
boot.