Now, when we support multiple consoles per domain,
the vm->def->console[0] can still remain an alias
for vm->def->serial[0]; However, we need to copy
it's source definition as well otherwise we'll regress
on virDomainOpenConsole.

* src/Makefile.am: Remove libvirt_bridge.syms and libvirt_macvtap.syms
  from EXTRA_DIST. Add libvirt_dbus.syms

Mingw32 complains if you request export of a symbol which does
not in fact exist.

* src/libvirt_bridge.syms, src/libvirt_macvtap.syms: Delete
  obsolete files
* src/libvirt_private.syms: Remove virNetServerGetDBusConn
* src/libvirt_dbus.syms: Add virNetServerGetDBusConn

lvs outputs "[$lvname_vorigin]" for the virtual snapshot lv
(created with "--virtualsize"), and the original device pointed
by "$lvname_vorigin" is just for lvm internal use, one should
never use it.

Per lvm's nameing rules, "[" is not valid as part of the vg/lv name.
(man 8 lvm).

<quote>
VALID NAMES
The following characters are valid for VG and LV names: a-z A-Z 0-9 + _
. -

VG and LV names cannot begin with a hyphen.   There  are  also  various
reserved  names that are used internally by lvm that can not be used as
LV or VG names.  A VG cannot be called anything that exists in /dev/ at
the time of creation, nor can it be called '.' or '..'.  A LV cannot be
called '.' '..' 'snapshot' or 'pvmove'. The LV name may also  not  con‐
tain the strings '_mlog' or '_mimage'
</quote>

So we can skip the set the lv's backingStore by checking if the name
begins with a "[".

This patch adds support for filtering of VLAN (802.1Q) traffic to the
parser and makes us of the ebtables support for VLAN filtering. This code
now enables the filtering of traffic in chains with prefix 'vlan'.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

Xen4.1 initializes some unspecified sexpr config items to an empty
string, unlike previous Xen versions that would leave the item unset.
E.g. the kernel item for an HVM guest (non-direct kernel boot):

Xen4.0 and earlier
  ...
  (image
    (hvm
      (kernel )
  ...

Xen4.1
  ...
  (image
    (hvm
      (kernel '')
  ...

The empty string for kernel causes some grief in subsequent parsing
where existence of specified kernel is checked, e.g.

  if (!def->os.kernel)
  ...

This patch solves the problem in sexpr_node_copy() by not copying
a node containing an empty string.

Since commit 6ec8288a, compilation has failed on RHEL 5:

util/virnetdevmacvlan.c:672: error: conflicting types for 'virNetDevMacVLanCreateWithVPortProfile'

* src/util/virnetdevmacvlan.c
(virNetDevMacVLanCreateWithVPortProfile): Add missing parameter.

This prepares for subsequent patches which introduce dependence
on cgroup cpuset. Enable cgroup cpuset by default so users don't
have to modify configuration file before encountering a cpuset
error.

This patch modifies the NWFilter parameter parser to support multiple
elements with the same name and to internally build a list of items.
An example of the XML looks like this:

        <parameter name='TEST' value='10.1.2.3'/>
        <parameter name='TEST' value='10.2.3.4'/>
        <parameter name='TEST' value='10.1.1.1'/>

The list of values is then stored in the newly introduced data type
virNWFilterVarValue.

The XML formatter is also adapted to print out all items in alphabetical
order sorted by 'name'.

This patch also fixes a bug in the XML schema on the way.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

This patch extends the NWFilter driver for Linux (ebiptables) to create
rules for each member of a previously introduced list. If for example
an attribute value (internally) looks like this:

IP = [10.0.0.1, 10.0.0.2, 10.0.0.3]

then 3 rules will be generated for a rule accessing the variable 'IP',
one for each member of the list. The effect of this is that this now
allows for filtering for multiple values in one field. This can then be
used to support for filtering/allowing of multiple IP addresses per
interface.

An iterator is introduced that extracts each member of a list and
puts it into a hash table which then is passed to the function creating
a rule. For the above example the iterator would cause 3 loops.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

NWFilters can be provided name-value pairs using the following
XML notation:

      <filterref filter='xyz'>
        <parameter name='PORT' value='80'/>
        <parameter name='VAL' value='abc'/>
      </filterref>

The internal representation currently is so that a name is stored as a
string and the value as well. This patch now addresses the value part of it
and introduces a data structure for storing a value either as a simple
value or as an array for later support of lists.

This patch adjusts all code that was handling the values in hash tables
and makes it use the new data type.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

The previous patch extends the priority of filtering rules into negative
numbers. We now use this possibility to interleave the jumping into
chains with filtering rules to for example create the 'root' table of
an interface with the following sequence of rules:

Bridge chain: libvirt-I-vnet0, entries: 6, policy: ACCEPT
-p IPv4 -j I-vnet0-ipv4
-p ARP -j I-vnet0-arp
-p ARP -j ACCEPT 
-p 0x8035 -j I-vnet0-rarp
-p 0x835 -j ACCEPT 
-j DROP 

The '-p ARP -j ACCEPT' rule now appears between the jumps.
Since the 'arp' chain has been assigned priority -700 and the 'rarp'
chain -600, the above ordering can now be achieved with the following
rule:

  <rule action='accept' direction='out' priority='-650'>
    <mac protocolid='arp'/>
  </rule>

This patch now sorts the commands generating the above shown jumps into
chains and interleaves their execution with those for generating rules.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

So far rules' priorities have only been valid in the range [0,1000].
Now I am extending their priority into the range [-1000, 1000] for subsequently
being able to sort rules and the access of (jumps into) chains following
priorities.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

This patch enables chains that have a known prefix in their name.
Known prefixes are: 'ipv4', 'ipv6', 'arp', 'rarp'. All prefixes
are also protocols that can be evaluated on the ebtables level.

Following the prefix they will be automatically connected to an interface's
'root' chain and jumped into following the protocol they evaluate, i.e.,
a table 'arp-xyz' will be accessed from the root table using

ebtables -t nat -A <iface root table> -p arp -j I-<ifname>-arp-xyz

thus generating a 'root' chain like this one here:

Bridge chain: libvirt-O-vnet0, entries: 5, policy: ACCEPT
-p IPv4 -j O-vnet0-ipv4
-p ARP -j O-vnet0-arp
-p 0x8035 -j O-vnet0-rarp
-p ARP -j O-vnet0-arp-xyz
-j DROP 

where the chain 'arp-xyz' is accessed for filtering of ARP packets.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

This patch extends the filter XML to support priorities of chains
in the XML. An example would be:

<filter name='allow-arpxyz' chain='arp-xyz' priority='200'>
[...]
</filter>

The permitted values for priorities are [-1000, 1000].
By setting the priority of a chain the order in which it is accessed
from the interface root chain can be influenced.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

Use the name of the chain rather than its type index (enum).
This pushes the later enablement of chains with user-given names
into the XML parser. For now we still only allow those names that
are well known ('root', 'arp', 'rarp', 'ipv4' and 'ipv6').
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

Use scripts for the renaming and cleaning up of chains. This allows us to get
rid of some of the code that is only capable of renaming and removing chains
whose names are hardcoded.

A shell function 'collect_chains' is introduced that is given the name
of an ebtables chain and then recursively determines the names of all
chains that are accessed from this chain and its sub-chains using 'jumps'.

The resulting list of chain names is then used to delete all the found
chains by first flushing and then deleting them.

The same function is also used for renaming temporary filters to their final
names.

I tested this with the bash and dash as script interpreters.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

Use the previously introduced chain priorities to sort the chains for access
from an interface's 'root' table and have them created in the proper order.
This gets rid of a lot of code that was previously creating the chains in a 
more hardcoded way.

To determine what protocol a filter is used for evaluation do prefix-
matching, i.e., the filter 'arp' is used to filter for the 'arp' protocol,
'ipv4' for the 'ipv4' protocol and 'arp-xyz' will also be used to filter
for the 'arp' protocol following the prefix 'arp' in its name.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

For better handling of the sorting of chains introduce an internally used
priority. Use a lookup table to store the priorities. For now their actual
values do not matter just that the values cause the chains to be properly
sorted through changes in the following patches. However, the values are
chosen as negative so that once they are sorted along with filtering rules
(whose priority may only be positive for now) they will always be instantiated
before them (lower values cause instantiation before higher values). This
is done to maintain backwards compatibility.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

Add a function to the virHashTable for getting an array of the hash table's
key-value pairs and have the keys (optionally) sorted.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

Support creation of macvlan devices for LXC containers. Do not
allow setting of bandwidth controls or vport profiles due to the
complication that there is no host side visible device to work
with.

* src/lxc/lxc_driver.c: Support type=direct interfaces

Update virNetDevMacVLanCreateWithVPortProfile to allow creation
of plain macvlan devices, as well as macvtap devices. The former
is useful for LXC containers

* src/qemu/qemu_command.c: Explicitly request a macvtap device
* src/util/virnetdevmacvlan.c, src/util/virnetdevmacvlan.h: Add
  new flag to allow switching between macvlan and macvtap
  creation

The current lxcSetupInterfaces() method directly performs setup
of the bridge devices. Since it will shortly need to also create
macvlan devices, move the bridge related code into a separate
method

* src/lxc/lxc_driver.c: Split lxcSetupInterfaces() to create a
  new lxcSetupInterfaceBridge()

The virDomainNetGetActualBridgeName and virDomainNetGetActualDirectDev
methods both return strings that point to data in the virDomainDefPtr
struct, and should therefore not be freed. The return values should
thus be 'const char *' not 'char *'.

* src/conf/domain_conf.c, src/conf/domain_conf.h: Mark const
* src/network/bridge_driver.c: Update to use a const char *

Fix ordering of symbols after re-arranging network device
management API source files

* src/libvirt_private.syms: Fix ordering

Move the ifaceMacvtapLinkDump and ifaceGetNthParent functions
into virnetdevvportprofile.c since they are specific to that
code. This avoids polluting the headers with the Linux specific
netlink data types

* src/util/interface.c, src/util/interface.h: Move
  ifaceMacvtapLinkDump and ifaceGetNthParent functions and delete
  remaining file
* src/util/virnetdevvportprofile.c: Add ifaceMacvtapLinkDump
  and ifaceGetNthParent functions
* src/network/bridge_driver.c, src/nwfilter/nwfilter_gentech_driver.c,
  src/nwfilter/nwfilter_learnipaddr.c, src/util/virnetdevmacvlan.c:
  Remove include of interface.h

Move virNetDevIsVirtualFunction, virNetDevGetVirtualFunctionIndex
and virNetDevGetPhysicalFunction to virnetdev.c

* src/util/interface.c, src/util/interface.h, src/util/virnetdev.c,
  src/util/virnetdev.h: Move APIs

Rename ifaceIsVirtualFunction to virNetDevIsVirtualFunction,
ifaceGetVirtualFunctionIndex to virNetDevGetVirtualFunctionIndex
and ifaceGetPhysicalFunction to virNetDevGetPhysicalFunction

* src/util/interface.c, src/util/interface.h: Rename APIs
* src/util/virnetdevvportprofile.c: Update for API rename

* src/util/interface.c, src/util/interface.h: Remove virNetDevValidateConfig
* src/util/virnetdev.c, src/util/virnetdev.h: Add virNetDevValidateConfig

Rename the ifaceCheck method to virNetDevValidateConfig and change
so that it always raises an error and returns -1 on error.

* src/util/interface.c, src/util/interface.h: Rename ifaceCheck
  to virNetDevValidateConfig
* src/nwfilter/nwfilter_gentech_driver.c,
  src/nwfilter/nwfilter_learnipaddr.c: Update for API rename

Move the virNetDevGetIPv4Address function to virnetdev.c

* util/interface.c, util/interface.h: Remove virNetDevGetIPv4Address
* util/virnetdev.c, util/virnetdev.h: Add virNetDevGetIPv4Address

To match up with the existing virNetDevSetIPv4Address, rename
ifaceGetIPAddress to virNetDevGetIPv4Address

* util/interface.h, util/interface.c: Rename API
* network/bridge_driver.c: Update for API rename

Move virNetDevGetIndex & virNetDevGetVLanID to virnetdev.c to
suit their functional purpose

* util/interface.c, util/interface.h: Remove virNetDevGetIndex &
  virNetDevGetVLanID
* util/virnetdev.c, util/virnetdev.h: Add virNetDevGetIndex &
  virNetDevGetVLanID

Rename the ifaceGetIndex method to virNetDevGetIndex and
ifaceGetVlanID to virNetDevGetVLanID. Also change the error
reporting behaviour to always raise errors and return -1 on
failure

* util/interface.c, util/interface.h: Rename ifaceGetIndex
  and ifaceGetVLAN
* nwfilter/nwfilter_gentech_driver.c, nwfilter/nwfilter_learnipaddr.c,
  nwfilter/nwfilter_learnipaddr.c, util/virnetdevvportprofile.c: Update
  for API renames and error handling changes

Move virNetDevReplaceMacAddress and virNetDevRestoreMacAddress
to the virnetdev.c file where they naturally belong

* util/interface.c, util/interface.h: Remove
  virNetDevReplaceMacAddress and virNetDevRestoreMacAddress
* util/virnetdev.c, util/virnetdev.h: Add
  virNetDevReplaceMacAddress and virNetDevRestoreMacAddress

Rename ifaceReplaceMacAddress to virNetDevReplaceMacAddress
and ifaceRestoreMacAddress to virNetDevRestoreMacAddress.

* util/interface.c, util/interface.h, util/virnetdevmacvlan.c:
  Rename APIs

Move the low level macvlan creation APIs into the
virnetdevmacvlan.c file where they more naturally
belong

* util/interface.c, util/interface.h: Remove virNetDevMacVLanCreate
  and virNetDevMacVLanDelete
* util/virnetdevmacvlan.c, util/virnetdevmacvlan.h: Add
  virNetDevMacVLanCreate and virNetDevMacVLanDelete

Rename ifaceMacvtapLinkAdd to virNetDevMacVLanCreate and
ifaceLinkDel to virNetDevMacVLanDelete. Strictly speaking
the latter isn't restricted to macvlan devices, but that's
the only use libvirt has for it.

* util/interface.c, util/interface.h,
  util/virnetdevmacvlan.c: Rename APIs

Rename virNetDevMacVLanCreate to virNetDevMacVLanCreateWithVPortProfile
and virNetDevMacVLanDelete to virNetDevMacVLanDeleteWithVPortProfile

To make way for renaming the other macvlan creation APIs in
interface.c

* util/virnetdevmacvlan.c, util/virnetdevmacvlan.h,
  qemu/qemu_command.c, qemu/qemu_hotplug.c, qemu/qemu_process.c:
  Rename APIs

Rename the macvtap.c file to virnetdevmacvlan.c to reflect its
functionality. Move the port profile association code out into
virnetdevvportprofile.c. Make the APIs available unconditionally
to callers

* src/util/macvtap.h: rename to src/util/virnetdevmacvlan.h,
* src/util/macvtap.c: rename to src/util/virnetdevmacvlan.c
* src/util/virnetdevvportprofile.c, src/util/virnetdevvportprofile.h:
  Pull in vport association code
* src/Makefile.am, src/conf/domain_conf.h, src/qemu/qemu_conf.c,
  src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update include
  paths & remove conditional compilation