Move the code to separate functions to avoid complicating the existing
ones with changes.

Since virBitmapSubtract is unused modify it to perform bitmap
intersection.

Commit id 'dd9b29da' added this new variable, but didn't free it in
one instance where status was returned to the caller.

Found by Coverity

Commit id '0fe4aa14' added @origErr, but since it's assigned outside
the if condition, the free should be outside as well.

Found by Coverity

A new function virNetDevOpenvswitchUpdateVlan has been created to instruct
OVS of the changes. qemuDomainChangeNet has been modified to handle the
update of the VLAN configuration for a running guest and rely on
virNetDevOpenvswitchUpdateVlan to do the actual update if needed.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This piece of code is going to be reused. So move it out to a
separate function.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Security impls of this function already raise errors, don't
overwrite them.

Preparation for switching to virFileCache where there are two callbacks,
one to get a new data and second one to load a cached data.

This also removes virQEMUCapsReset which is no longer required.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

It's not required and following patches will change the code.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

Cleanups the code a little bit and reduces amount of arguments passed
throughout the functions.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

While searching for an element using a function it may be
desirable to know the element key for future operation.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

Actually we use virConnectNodeDeviceEventGenericCallback.
Signed-off-by: NChen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: NErik Skultety <eskultet@redhat.com>

At present shared disks can be migrated with either readonly or cache=none. But
cache=directsync should be safe for migration, because both cache=directsync and cache=none
don't use the host page cache, and cache=direct write through qemu block layer cache.
Signed-off-by: NPeng Hao <peng.hao2@zte.com.cn>
Reviewed-by: NWang Yechao <wang.yechao255@zte.com.cn>

Use virStorageSource accessors to check the file and call
virStorageFileAccess before even attempting to stat the target. This
will be helpful once we try to add network destinations for block copy,
since there will be no need to stat them.

Move the code into a separate function so that the flow of creating the
copy is more obvious and split into logical pieces.

Rather than using the local-file only implementation 'qemuOpenFile'
switch to the imagelabel aware storage driver implementation.

When copying to a block device, the block device will already exist. To
allow users using a block device without any preparation, they need to
use the block copy without VIR_DOMAIN_BLOCK_COPY_REUSE_EXT.

This means that if the target is an existing block device we don't need
to prepare it, but we can't reject it as being existing.

To avoid breaking this feature, explicitly assume that existing block
devices will be reused even without that flag explicitly specified,
while skipping attempts to create it.

qemuMonitorDriveMirror still needs to honor the flag as specified by the
user, since qemu overwrites the metadata otherwise.

Extract the presence of the flag into a boolean to simplify conditions
and allow further manipulation of the state of the flag.

   For attaching hosdev, we should set dev->data.hostdev
   rather than dev->data.disk
Signed-off-by: NChen Hanxiao <chenhanxiao@gmail.com>

Where it can be supported in Fedora, the driver is built and made
available as a subpackage.
Signed-off-by: NNeal Gompa <ngompa13@gmail.com>

Test that we are able to create a JSON object and nest it into a string
property of a JSON object and then correctly extract and parse it back.

Make sure that JSON strings can contain characters which need to be
escaped (double quotes, backslashes, tabs, etc.).

@remote_file, allocated by virAsprintf, was not freed and leaked.
Signed-off-by: NZhipeng Lu <lu.zhipeng@zte.com.cn>

@map_device, allocated by virAsprintf in virStorageBackendCreateVols,
was not freed and leaked.
Signed-off-by: NZhipeng Lu <lu.zhipeng@zte.com.cn>

Format the parsed string back and compare it to the original (or
modified) string for back and forth comparison.

The example is rather long and upcomming patch will check whether the
string can be formatted back. As the formatted string lacks spaces and
adding the 'expect' string with spaces would be rather long, just drop
spaces from this test case.

There are other test cases which do contain spaces.

To allow better testing in case where the string was parsed, modify the
logic so that the regular code path is not included in a conditional
block.

Introduced by commit 0832c58c, with the intention to link with
the stack protector library.

Another instance introduced by commit 4cbc15d0 which separated
commandhelper_LDADD from LDADDS.

Not needed because per commit 71b54636, automake should pass
all the CFLAGS to the linker.

Should be followed with qemuDomainObjExitMonitor only if
qemuDomainObjEnterMonitorAsync returns 0.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The refactor to split up storage driver into modules broke the apparmor
helper program, since that did not initialize the storage driver
properly and thus detection of the backing chain could not work.

Register the storage driver backends explicitly. Unfortunately it's now
necessary to link with the full storage driver to satisfy dependencies
of the loadable modules.
Reviewed-by: NChristian Ehrhardt <christian.ehrhardt@canonical.com>
Reported-by: NChristian Ehrhardt <christian.ehrhardt@canonical.com>
Tested-by: NChristian Ehrhardt <christian.ehrhardt@canonical.com>

The purpose of this function is to tell if the current position
in given FD is in data section or a hole and how much bytes there
is remaining until the end of the section. This is achieved by
couple of lseeks(). The most important part is that we reposition
the FD back, so that the position is unchanged from the caller
POV. And until now the final lseek() back to the original
position was done with no check for errors. And I was convinced
that that's okay since nothing can go wrong. However, review
feedback from a related series persuaded me, that it's better to
be safe than sorry. Therefore, lets check if the final lseek()
succeeded and if it doesn't report an error.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

/domain/devices/disk/driver/@name is not a required or mandatory
attribute according to formatdomain, and indeed it was agreed on
IRC that the attribute is "optional for input, recommended (but
not required) for output". Currently the schema requires the
attribute, causing virt-xml-validate to fail on disk config where
the driver name is not explicitly specified. E.g.

# cat test.xml | grep -A 5 cdrom
    <disk type='file' device='cdrom'>
      <driver type='raw'/>
      <target dev='hdb' bus='ide'/>
      <readonly/>
      <address type='drive' controller='0' bus='0' target='0' unit='1'/>
    </disk>

# virt-xml-validate test.xml
Relax-NG validity error : Extra element devices in interleave
test.xml:21: element devices: Relax-NG validity error : Element domain failed to validate content
test.xml fails to validate

Relaxing the name attribute to be optional fixes the validation

# virt-xml-validate test.xml
test.xml validates

In Wireshark commit of 7cd6906056922e4b8 (contained in v2.4.0)
the tvb_new_subset() function was renamed to
tvb_new_subset_length_caplen(). However, we can take the extra
step and rename to tvb_new_subset_remaining() directly (see
Wireshark commit 0ecfc7280cf3d7). The reasoning is that there is
no other protocol in the packet than libvirt. Therefore, from the
point that libvirt dissector takes over till the end of the
packet it's all libvirt packet.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMartin Kletzander <mkletzan@redhat.com>

Adjust qemu 2.9 s390 capabilites xml and enable qemu capabilities test.
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>

Commit id '9c5d98fd' missed changing this call to use driver->devs
rather than @driver->devs.

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NLaine Stump <laine@laine.org>

All the pieces are now in place, so we can finally start
using isolation groups to achieve our initial goal, which is
separating hostdevs from emulated PCI devices while keeping
hostdevs that belong to the same host IOMMU group together.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1280542Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NLaine Stump <laine@laine.org>

These rules will make it possible for libvirt to
automatically assign PCI addresses in a way that
respects any isolation constraints devices might
have.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NLaine Stump <laine@laine.org>