Add a virDBusErrorIsUnknownMethod helper so that callers
don't need todo string comparisons themselves to detect
standard error names.

The virDBusMethodCall method has a DBusError as one of its
parameters. If the caller wants to pass a non-NULL value
for this, it immediately makes the calling code require
DBus at build time. This has led to breakage of non-DBus
builds several times. It is desirable that only the virdbus.c
file should need WITH_DBUS conditionals, so we must ideally
remove the DBusError parameter from the method.

We can't simply raise a libvirt error, since the whole point
of this parameter is to give the callers a way to check if
the error is one they want to ignore, without having the logs
polluted with an error message. So, we add a virErrorPtr
parameter which the caller can then either ignore or raise
using the new virReportErrorObject method.

This new method is distinct from virSetError in that it
ensures the logging hooks are run.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

For distros that want to add versioned machine types, they will add
(downstream) machine types like "virt-foo-1.2.3".  Detect these as
MMIO too.
Signed-off-by: NRichard W.M. Jones <rjones@redhat.com>

Previous patch of this series fixed the issue with adding a new PCI bridge
when all the slots were reserved by devices with user specified addresses.
In case there are still some PCI devices waiting to get a slot reserved
by qemuAssignDevicePCISlots, this means a new bus needs to be
created along with a corresponding bridge controller. By adding an
additional check, this scenario now results in a reasonable error
instead of generating wrong qemu command line.

Commit 93c8ca tried to fix the issue with auto-adding of a PCI bridge
controller, but didn't work properly in all scenarios.

This patch provides a better fix of the issue when all slots on a PCI bus
are reserved by devices with user specified addresses and no additional
bridges need to be created.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1132900

In order to be able to test for fully reserved PCI buses, assignment of
PCI slots for integrated devices needs to be moved to a separate function.
This also might be a good preparation if we decide to add support for
other chipsets as well.

Move qemuDomainAssignPCIAddresses after the definition
of the static function qemuDomainValidateDevicePCISlotsQ35.

This lets us define a new static function using
qemuDomainValidateDevicePCISlots* and use it in
qemuDomainAssignPCIAddresses without a forward declaration.
Signed-off-by: NJán Tomko <jtomko@redhat.com>

The function doesn't allow to modify the array in any way, thus the
argument can be const.

@def is modified in the function indirectly although it's marked as
const.

After refactor to use the virTristateSwitch enum the comment in the
struct was not adjusted.

Previously the function returned either -1 in case of an error or 0 on
success. However, we should also distinguish between a case we
successfully added a controller and a case there wasn't a need to add any
controller

As it turned out, fix of dead code 419a22 changed the affected condition
from "never true" to "always true", so better fix would be to change the
return code of virDomainMaybeAddController from 0 to 1 if
a new bridge has been added, thus distinguishing case when we didn't need to
add any controller and case we successfully added one.

The return code is changed in the next commit

Clang found possible dereference of NULL pointer which is right.
Function 'esxVI_LookupTaskInfoByTask' should find a task info. The issue
is that we could return 0 and leave 'taksInfo' pointer NULL because if
there is no match we simply end the search loop end set 'result' to 0.
Every caller count on the fact that if the return value is 0 than it's
safe to dereference 'taskInfo'. We should return 0 only in case we found
something and the '*taskInfo' is not NULL.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Clang found that we are passing variable with wrong enum type to
'xenapiCrashExitEnum2virDomainLifecycle' function. This is probably
copy-paste typo as the correct variable exists in the code, but it isn't
used.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Per-cpu stats are only shown for present CPUs in the cgroups,
but we were only parsing the largest CPU number from
/sys/devices/system/cpu/present and looking for stats even for
non-present CPUs.
This resulted in:
internal error: cpuacct parse error

The ACL check didn't check the VIR_DOMAIN_XML_SECURE flag and the
appropriate permission for it. Found via code inspection while fixing
permissions for save images.

The ACL check didn't check the VIR_DOMAIN_XML_SECURE flag and the
appropriate permission for it.

https://bugzilla.redhat.com/show_bug.cgi?id=1164627

When using 'virsh attach-device' to hotplug an unsupported console type
into a qemu guest the attachment would succeed as the command line
formatter didn't report error in such case.
Signed-off-by: NLuyao Huang <lhuang@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1130390

The listen address is not mandatory for <interface type='server'>
but when it's not specified, we've been formatting it as:
-netdev socket,listen=(null):5558,id=hostnet0
which failed with:
Device 'socket' could not be initialized

Omit the address completely and only format the port in the listen
attribute.

Also fix the schema to allow specifying a model.

Commit 318df5a0 changed the prototype of virCgroupNewMachine
without adjusting the stub function for platforms without
cgroups.

This adds a new "localOnly" attribute on the domain element of the
network xml.  With this set to "yes", DNS requests under that domain
will only be resolved by libvirt's dnsmasq, never forwarded upstream.

This was how it worked before commit f69a6b98, and I found that
functionality useful.  For example, I have my host's NetworkManager
dnsmasq configured to forward that domain to libvirt's dnsmasq, so I can
easily resolve guest names from outside.  But if libvirt's dnsmasq
doesn't know a name and forwards it to the host, I'd get an endless
forwarding loop.  Now I can set localOnly="yes" to prevent the loop.
Signed-off-by: NJosh Stone <jistone@redhat.com>

Using the same driver multiple times is pointless and
it can result in confusing errors:

$ virsh start test
error: Failed to start domain test
error: internal error: security label already defined for VM

https://bugzilla.redhat.com/show_bug.cgi?id=1153891

Depending on the context, either error out if the domain
has disappeared in the meantime, or just ignore the value
to allow marking the function as ATTRIBUTE_RETURN_CHECK.

https://bugzilla.redhat.com/show_bug.cgi?id=1161024

If the domain crashed while we were in monitor,
we cannot rely on the REALLOC done on live definition,
since vm->def now points to the persistent definition.
Skip adding the attached devices to domain definition
if the domain crashed.

In AttachChrDevice, the chardev was already added to the
live definition and freed by qemuProcessStop in the case
of a crash. Skip the device removal in that case.

Also skip audit if the domain crashed in the meantime.

https://bugzilla.redhat.com/show_bug.cgi?id=1161024

In the device type-specific functions, exit early
if the domain has disappeared, because the cleanup
should have been done by qemuProcessStop.

Check the return value in processDeviceDeletedEvent
and qemuProcessUpdateDevices.

Skip audit and removing the device from live def because
it has already been cleaned up.

Commit adff345e added support for features to MODE_HOSTPASSTHROUGH
as well. Since we support all modes now, the condition can be
eliminated.

The path to the pty of a Xen PV console is set only in
virDomainOpenConsole. But this is done too late. A call to
virDomainGetXMLDesc done before OpenConsole will not have the path to
the pty, but a call after OpenConsole will.

e.g. of the current issue.
Starting a domain with '<console type="pty"/>'
Then:
virDomainGetXMLDesc():
  <devices>
    <console type='pty'>
      <target type='xen' port='0'/>
    </console>
  </devices>
virDomainOpenConsole()
virDomainGetXMLDesc():
  <devices>
    <console type='pty' tty='/dev/pts/30'>
      <source path='/dev/pts/30'/>
      <target type='xen' port='0'/>
    </console>
  </devices>

The patch intend to have the TTY path on the first call of GetXMLDesc.
This is done by setting up the path at domain start up instead of in
OpenConsole.

https://bugzilla.redhat.com/show_bug.cgi?id=1170743Signed-off-by: NAnthony PERARD <anthony.perard@citrix.com>

Many GCC versions don't understand -Wno-suggest-attribute=format
so the pragma must only be used when supported

It's possible to create a container with existing
disk image as root filesystem. You need to remove
existing disks from PCS VM config and then add a new
one, pointing to your image. And then call PrlVm_RegEx
with PRNVM_PRESERVE_DISK flag.

With this patch you can create such container with
something like this for new domain XML config:

    <filesystem type='file' accessmode='passthrough'>
      <driver type='ploop' format='ploop'/>
      <source file='/path-to-image'/>
      <target dir='/'/>
    </filesystem>
Signed-off-by: NDmitry Guryanov <dguryanov@parallels.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Handle information about filesystems in domain config
and add corresponding devices to container via
parallels sdk.
Signed-off-by: NDmitry Guryanov <dguryanov@parallels.com>

PCS removes disk image from filesystem, if you remove it
from config. There is a special flag PVCF_DETACH_HDD_BUNDLE
which allow to remove disk only from VM/CT config.

If you call virDomainDefine and remove some disk from
config it should be preserved, so call PrlVm_CommitEx
always with flag PVCF_DETACH_HDD_BUNDLE.
Signed-off-by: NDmitry Guryanov <dguryanov@parallels.com>

Obtain information about container's filesystems and
store it in virDomainDef structure.
Signed-off-by: NDmitry Guryanov <dguryanov@parallels.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Ploop is a pseudo device which makeit possible to access
to an image in a file as a block device. Like loop devices,
but with additional features, like snapshots, write tracker
and without double-caching.

It used in PCS for containers and in OpenVZ. You can manage
ploop devices and images with ploop utility
(http://git.openvz.org/?p=ploop).
Signed-off-by: NDmitry Guryanov <dguryanov@parallels.com>

This is used as a boolean parameter for the '-cpu' option.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1178853Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Just a new feature that can be turned on/off.

https://bugzilla.redhat.com/show_bug.cgi?id=1178853Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Commit id 'ca481a6f' added virNetworkRouteDefFree which may be called
in an error path from lxcAddNetworkRouteDefinition with 'route = NULL'.
So just add the (!def) at the top to resolve.

We tested for positive return value from virDomainMaybeAddController,
but it returns 0 or -1 only resulting in a dead code.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

In case we find out, there are more PCI devices to be connected
than there are available slots on the default PCI bus, we automatically add a
new bus and a related PCI bridge controller as well. As there are no free slots
left on the default PCI bus, PCI bridge controller gets a free slot on a
newly created PCI bus which causes qemu to refuse to start the guest.
This fix introduces a new function qemuDomainPCIBusFullyReserved which
is checked right before we possibly try to reserve a slot for PCI bridge
controller.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1132900

Commit id 'aa2cc721' added calls to virSocketAddrFormat but did not
check for a NULL (error) return which could lead to bad output
in the XML file.  Need to check for NULL return and cause failure.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>