Some modules/libraries within QEMU could make use of the XDG_ vars when
writing their data to the disk. Define the most common XDG variables
and point them to the specific driver's libDir, i.e.

XDG_CACHE_HOME -> /var/lib/libvirt/<driver>/.cache
XDG_DATA_HOME -> /var/lib/libvirt/<driver>/.local/share
XDG_CONFIG_HOME -> /var/lib/libvirt/<driver>/.config
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

The functions do basically exactly the same thing modulo few checks.
In case of virtio disks we check that the device is not multifunction as
that can't be unplugged at once. In case of USB and SCSI disks we
checked that no active block job is running.

The check for running blockjobs should have also been done for virtio
disks. By moving the multifunction check into the common function we fix
this case and also simplify the code.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Use the correct type in switch and populate the missing cases.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

We don't have any cleanup section, we can return the value directly.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Based on recent list questions about the proposed addition of
virDomainCheckpointCreateXML(REDEFINE), it is worth adding some
clarification to the existing snapshot redefine documentation that is
serving as the basis for checkpoints.

Normal snapshot creation requires very few elements from the user XML
(libvirt can pick sane defaults for items that are omitted, and many
fields, including <domain>, are documented as readonly output fields
ignored on input, produced by drivers that track it). But during
REDEFINE, the API wants the complete XML produced by an earlier
virDomainSnapshotGetXMLDesc; as the domain definition has likely
changed since the snapshot was first created, libvirt is unable to
recreate a <domain> sub-element that matches the original output
representing the domain state at the time the snapshot was first
created. In fact, reverting without a <domain> sub-element is risky
enough that we had to add a FORCE flag for virDomainSnapshotRevert().
In short, we only support omitting domain for qemu because of
backwards-compatibility to snapshots created before 0.9.5 started
capturing <domain>; even though there are other drivers like vbox that
do not output <domain> because they have other reliable ways to
revert.

And based on the confusion caused when omitting <domain> from snapshot
XML, the initial design for checkpoints in later patches will make
<domain> a mandatory element during its REDEFINE.

[Side note: the fact that <domain> can appear in <domainsnapshot> is a
reason we cannot add a new API for a bulk listing or redefine of all
snapshots of a single domain in one XML call (for example, a 1M
<domain> XML * 16 snapshots explodes into 16M in a bulk form, which
gets difficult to send over RPC). Perhaps we could add a flag to
request that the <domain> sub-element be omitted on output, but such
output is no longer suitable for sane REDEFINE input.]
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

I had to inspect the code to learn whether a final virObjectUnref()
calls ALL dispose callbacks in child-to-parent order (akin to C++
destructors), or whether I manually had to call a parent-class dispose
when writing a child class dispose method.  The answer is the
former. (Thankfully, since VIR_FREE wipes out pointers for safety,
even if I had guessed wrong, I probably would not have tripped over a
double-free fault when the parent dispose ran for the second time).  I
also had to read the code to learn if a dispose method was even
mandatory (it is not, although getting NULL through VIR_CLASS_NEW
requires a macro).  While at it, the VIR_CLASS_NEW macro requires that
the virObject component at offset 0 be reached through the name
'parent', not 'object'.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1623389

If a device is detached twice from the same domain the following
race condition may happen:

1) The first DetachDevice() call will issue "device_del" on qemu
monitor, but since the DEVICE_DELETED event did not arrive in
time, the API ends claiming "Device detach request sent
successfully".

2) The second DetachDevice() therefore still find the device in
the domain and thus proceeds to detaching it again. It calls
EnterMonitor() and qemuMonitorSend() trying to issue "device_del"
command again. This gets both domain lock and monitor lock
released.

3) At this point, qemu sends us the DEVICE_DELETED event which is
going to be handled by the event loop which ends up calling
qemuDomainSignalDeviceRemoval() to determine who is going to
remove the device from domain definition. Whether it is the
caller that marked the device for removal or whether it is going
to be the event processing thread.

4) Because the device was marked for removal,
qemuDomainSignalDeviceRemoval() returns true, which means the
event is to be processed by the thread that has marked the device
for removal (and is currently still trying to issue "device_del"
command)

5) The thread finally issues the "device_del" command, which
fails (obviously) and therefore it calls
qemuDomainResetDeviceRemoval() to reset the device marking and
quits immediately after, NOT removing any device from the domain
definition.

At this point, the device is still present in the domain
definition but doesn't exist in qemu anymore. Worse, there is no
way to remove it from the domain definition.

Solution is to note down that we've seen the event and if the
second "device_del" fails, not take it as a failure but carry on
with the usual execution.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
ACKed-by: NPeter Krempa <pkrempa@redhat.com>

A caller might be interested in differentiating the cause for
error, especially if DeviceNotFound error occurred.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
ACKed-by: NPeter Krempa <pkrempa@redhat.com>

The aim of this function will be to fix return value of
qemuMonitorDelDevice() in one specific case. But that is yet to
come. Right now this is nothing but a plain substitution.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
ACKed-by: NPeter Krempa <pkrempa@redhat.com>

We're using virFileFindResourceFull() to locate resources
nowadays, which makes exporting these information in the
environment unnecessary: see

  virDriverLoadModule() for LIBVIRT_DRIVER_DIR
  virLockManagerPluginNew() for LIBVIRT_LOCK_MANAGER_PLUGIN_DIR
  virLockManagerLockDaemonConnectionNew() for VIRTLOCKD_PATH
  doRemoteOpen() for LIBVIRTD_PATH

As further proof that we don't need to expose the information
this way anymore, we're not even exporting VIRTLOGD_PATH, which
would be necessary if virLogManagerConnect() didn't already
take care of that for us.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Any job which is able to provide statistics that can be queried via
virDomainGetJob{Stats,Info} has to set an appropriate statsType.

Without a proper statsType qemuDomainJobInfoToParams and
qemuDomainJobInfoToInfo have no idea what statistics should be sent to
the API caller.

https://bugzilla.redhat.com/show_bug.cgi?id=1688774Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Fill in a default volume type for every pool type, as reported
by the VolGetInfo API. Now that we cover the whole enum, report
an error for invalid values.
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Reviewed-by: NMartin Kletzander <mkletzan@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

We provide a custom configure option --enable-test-coverage and
'make cov' target to generate code coverage reports. However gnulib
already provides a 'make coverage' which 'just works' and doesn't
require a special configure option.

This drops our custom implementation in favor of 'make coverage'.
Reports are now output to cov/index.html
Reviewed-by: NMartin Kletzander <mkletzan@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

There is no way that qemu driver can work without being able to
format/parse JSON.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The basic idea of our configure script is to probe for things
rather than have them enabled by default. This is even more
visible in the next commit where configure fails if qemu driver
is enabled but no yajl is found.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

The code tries to detect installed version of qemu to learn if it
uses HMP or QMP and enable YAJL based on that. Well, we support
only QMP and also minimal required version of qemu is 1.5.0 so
the check would have enabled yajl anyway.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

A new API flag is news-worthy.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMartin Kletzander <mkletzan@redhat.com>

Introduce a simple validation helper to perform the cputune period and
quota checks so that we can get rid of those repetitive chunks. Since
this is a validation helper, this patch also moves the checks from the
'parse' phase into the 'validation' phase.
Signed-off-by: NSuyang Chen <dawson0xff@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Apparently this was necessary in the past because old versions
of autoconf/automake didn't make them available, but these
days all of the platforms we target include recent enough
autotools - as evidenced by the fact that, for example, we
already use abs_top_srcdir in tools/ despite the fact that
tools/Makefile.am is missing the same boilerplate.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NMartin Kletzander <mkletzan@redhat.com>

We already have code that defines all abs_* variables at the
top of tests/Makefile.am, so there is no point in redefining
them a second time (using a slightly different shell
incantation to boot).
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NMartin Kletzander <mkletzan@redhat.com>

According to the official documentation for autoconf[1], the
correct names for these variables are abs_top_{src,build}dir
rather than abs_top{src,build}dir; in fact, we're already
using the correct names in various places, so let's just make
everything nice and consistent.

[1] https://www.gnu.org/software/autoconf/manual/autoconf-2.69/html_node/Preset-Output-Variables.htmlSigned-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NMartin Kletzander <mkletzan@redhat.com>

This code snippet has clearly been cargo-culted, and all its
instances can be safely dropped seeing as 1) a much better
way to handle the scenario in C programs would be to pass the
value via the preprocessor, and 2) the value is actually not
used anywhere after being defined.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NMartin Kletzander <mkletzan@redhat.com>

It's no longer used anywhere.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NMartin Kletzander <mkletzan@redhat.com>

TEST_DRIVER_DIR is defined as "$(top_builddir)/src/.libs"; however,
as of commit bc6e2063, virDriverLoadModule() will search (the
absolute version of) that directory automatically, which means
passing it through the environment is no longer necessary.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NMartin Kletzander <mkletzan@redhat.com>

LIBVIRT_DRIVER_DIR is defined as (what is for all intents and
purposes equivalent to) "$(abs_top_builddir)/src/.libs"; however,
as of commit bc6e2063, virDriverLoadModule() will search that
directory automatically, which means passing it through the
environment is no longer necessary.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NMartin Kletzander <mkletzan@redhat.com>

It's no longer used as of commit a9694a8e.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NMartin Kletzander <mkletzan@redhat.com>

Use VIR_AUTOFREE and saner formatting. No semantic change.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

An upcoming patch wants to reuse XML parsing of both unix and tcp
network host descriptions in the context of setting up a backup
NBD server. Make that easier by refactoring the existing parser.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

We copy-and-paste a lot of our docs, as evidenced by the number of
*GetXMLDesc() functions which had the same unusual indentation and
missing capital in the second sentence of the returns paragraph.
Signed-off-by: NEric Blake <eblake@redhat.com>

Commit 09eb1ae0 added a new enum type for xenbus, and adjusted
affected switch statements in the qemu driver, but failed to notice
that the vbox driver had a similar switch statement.
Signed-off-by: NEric Blake <eblake@redhat.com>

Add support in the domXML<->native config converter for
max_grant_frames. Include a test for the conversion.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Add support for setting max_grant_frames in libxl domain config
object and include a test to check that it is properly converted
from XML to libxl domain config.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

All Xen domains have a xenbus device. Implicitly add one if not
already explicitly specified in the domain config.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

xenbus is virtual controller (akin to virtio controllers) for Xen
paravirtual devices. Although all Xen VMs have a xenbus, it has
never been modeled in libvirt, or in Xen native VM config format
for that matter.

Recently there have been requests to support Xen's max_grant_frames
setting in libvirt. max_grant_frames is best modeled as an attribute
of xenbus. It describes the maximum IO buffer space (or DMA space)
available in xenbus for use by connected paravirtual devices. This
patch introduces a new xenbus controller type that includes a
maxGrantFrames attribute.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Commit a3ab6d42 changed the libvirtd profile to a named profile,
breaking the apparmor driver's ability to detect if the profile is
active. When the apparmor driver loads it checks the status of the
libvirtd profile using the full binary path, which fails since the
profile is now referenced by name. If the apparmor driver is
explicitly requested in /etc/libvirt/qemu.conf, then libvirtd fails
to load too.

Instead of only checking the profile status by full binary path,
also check by profile name. The full path check is retained in case
users have a customized libvirtd profile with full path.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>
Acked-by: NJamie Strandboge <jamie@canonical.com>

This helper performs a conversion from a "yes|no" string to a
corresponding boolean. This allows us to drop several repetitive
if-then-else string->bool conversion blocks.
Signed-off-by: NShotaro Gotanda <g.sho1500@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

This is mostly to avoid a memleak that is not a true memleak
anyway - prefixes will be freed by kernel upon test exit.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMartin Kletzander <mkletzan@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

This enables us to simplify the code a bit.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>