- 11 11月, 2016 9 次提交
-
-
由 Daniel P. Berrange 提交于
Use a dark banner whose color matches the dark green used in the logo. Introduce a newly rendered version of the header logo derived from new SVG file, instead of old one from (now lost) Adobe Illustrator file. The top banner logo now links to the front page as is common practice for most websites. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Add the SVG files for the libvirt logo, along with corresponding pre-rendered PNG bitmaps at key sizes. Also add a README file describing how to modify the logos and their intended usages. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
The original libvirt logo was built using what appears to be either Overpass font, or one stylistically very similar (the slanted top of letters like 'l', 't', etc). The newly recreated libvirt logo will use Overpass. Use this font for the website text too, to provide a consistent style. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Peter Krempa 提交于
The memory device alias needs to be treated as machine ABI as qemu is using it in the migration stream for section labels. To simplify this generate the alias from the slot number unless an existing broken configuration is detected. With this patch the aliases are predictable and even certain configurations which would not be migratable previously are fixed. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1359135
-
由 Peter Krempa 提交于
As with other devices assign the slot number right away when adding the device. This will make the slot numbers static as we do with other addressing elements and it will ultimately simplify allocation of the alias in a static way which does not break with qemu.
-
由 Peter Krempa 提交于
Detect on reconnect to a running qemu VM whether the alias of a hotpluggable memory device (dimm) does not match the dimm slot number where it's connected to. This is necessary as qemu is actually considering the alias as machine ABI used to connect the backend object to the dimm device. This will require us to keep them consistent so that we can reliably restore them on migration. In some situations it was currently possible to create a mismatched configuration and qemu would refuse to restore the migration stream. To avoid breaking existing VMs we'll need to keep the old algorithm though.
-
由 Peter Krempa 提交于
Simplify handling of the 'dimm' address element by allowing to specify the slot number only. This will allow libvirt to allocate slot numbers before starting qemu.
-
由 Daniel P. Berrange 提交于
Since we no longer support building on RHEL-5, we can drop the non-pkg-config based check for parted. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
We dropped support for RHEL-5 vintage Xen a while ago, but forgot to remove some of the hacks for it. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 10 11月, 2016 7 次提交
-
-
由 John Ferlan 提交于
Commit id '74bbb8c2' seems to have mismerged a bit - adding 240 comments out of place. Just clean that up.
-
由 Michal Privoznik 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1386976 We have everything ready. Actually the only limitation was our check that denied hotplug of vhost-user. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
If there is an error hotpluging a net device (for whatever reason) a rollback operation is performed. However, whilst doing so various helper functions that are called report errors on their own. This results in the original error to be overwritten and thus misleading the user. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Martin Kletzander 提交于
Even though using /dev/shm/asdf as the backend, we still need to make the mapping shared. The original patch forgot to add that parameter. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1392031Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Michal Privoznik 提交于
There's one copy paste error where a comment mentions QEMU instead of LXC driver. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Pavel Hrdina 提交于
../../src/qemu/qemu_capabilities.c:3757: error: declaration of 'basename' shadows a global declaration [-Wshadow] Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Martin Kletzander 提交于
Function qemuDomainAttachShmemDevice() steals the device data if the hotplug was successful, but the condition checked for unsuccessful execution otherwise. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
- 09 11月, 2016 15 次提交
-
-
由 Prasanna Kumar Kalever 提交于
Propagate the selected or default level to qemu if it's supported. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1376009Signed-off-by: NPrasanna Kumar Kalever <prasanna.kalever@redhat.com> Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
-
由 Prasanna Kumar Kalever 提交于
This helps in selecting log level of the gluster gfapi, output to stderr. The option is 'gluster_debug_level', can be tuned by editing '/etc/libvirt/qemu.conf' Debug levels ranges 0-9, with 9 being the most verbose, and 0 representing no debugging output. The default is the same as it was before, which is a level of 4. The current logging levels defined in the gluster gfapi are: 0 - None 1 - Emergency 2 - Alert 3 - Critical 4 - Error 5 - Warning 6 - Notice 7 - Info 8 - Debug 9 - Trace Signed-off-by: NPrasanna Kumar Kalever <prasanna.kalever@redhat.com> Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
-
由 Andrea Bolognani 提交于
Add QMP schema data query for aarch64. The gic capabilities are unfortunately queried after the QMP schema and thus this patch needs to undo the temporary removal of the declared support for query-qmp-schema. Note that as a gicv3 machine was not available the schema data is taken from the gicv2 case. It should be identical since qemu would be built from the same source. Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
-
由 Andrea Bolognani 提交于
Add QMP schema data query for aarch64. The gic capabilities are unfortunately queried after the QMP schema and thus this patch needs to undo the temporary removal of the declared support for query-qmp-schema. Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
-
由 Prasanna Kumar Kalever 提交于
Teach qemu driver to detect whether qemu supports specifying debug level for gluster volumes. Signed-off-by: NPrasanna Kumar Kalever <prasanna.kalever@redhat.com> Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
-
由 Peter Krempa 提交于
Allow detecting capabilities according to the qemu QMP schema. This is necessary as sometimes the availability of certain options depends on the presence of a field in the schema. This patch adds support for loading the QMP schema when detecting qemu capabilities and adds a very simple query language to allow traversing the schema and selecting a certain element from it. The infrastructure in this patch uses a query path to set a specific capability flag according to the availability of the given element in the schema.
-
由 Peter Krempa 提交于
Remove the command from the supported commands list temporarily so that QMP introspection code can be added without breaking tests and having to tweak the test data in the same commit. This will be later reverted and test data will be added. The aarch64 code is special as it calls additional commands and thus the test data can't be added upfront.
-
由 Andrea Bolognani 提交于
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
-
由 Pavel Hrdina 提交于
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
-
由 Pavel Hrdina 提交于
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
-
由 Pavel Hrdina 提交于
Add output of 'query-qmp-schema' to the capabilities test. Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
-
由 Andrea Bolognani 提交于
Sync up to the released version of qemu. Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
-
由 Andrea Bolognani 提交于
Sync up to the released version of qemu. Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
-
由 Peter Krempa 提交于
Call 'query-qmp-schema' and store the returned types in a hash table keyed by the 'name' field so that the capabilities code can traverse it.
-
由 Peter Krempa 提交于
Simplifies cases where JSON array members need to be transferred to a different structure.
-
- 08 11月, 2016 9 次提交
-
-
由 Michal Privoznik 提交于
Some operations like reboot, save, coreDump, blockStats, ifaceStats make sense iff domain is running. While it is technically possible for our test driver to return success regardless of domain state, we should copy constraints from other drivers and thus deny these operations over inactive domains. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 John Ferlan 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1379196 Add check in qemuCheckDiskConfig for an invalid combination of using the 'scsi' bus for a block 'lun' device and any disk source format other than 'raw'.
-
由 Daniel P. Berrange 提交于
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Dawid Zamirski 提交于
-
由 Dawid Zamirski 提交于
extracted from VirutalBox SDK and reindented with cppi.
-
由 Félix Bouliane 提交于
Fixes the behavior when destroying a domain more than once. VIR_ERR_OPERATION_INVALID should be raised when destroying an already destroyed domain. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Guido Günther 提交于
Release tarballs ship the include/libvirt/libvirt-common.h. when srcdir != builddir we end up including libvirt-common.h twice: from $top_srcdir/include/libvirt-common.h and from $builddir/include/libvirt-common.h leading to function virTypedParamsGetUInt from /tmp/buildd/libvirt-2.4.0/debian/build/docs/../include/libvirt/libvirt-common.h redeclared in /tmp/buildd/libvirt-2.4.0/docs/../include/libvirt/libvirt-common.h function virTypedParamsAddBoolean from /tmp/buildd/libvirt-2.4.0/debian/build/docs/../include/libvirt/libvirt-common.h redeclared in /tmp/buildd/libvirt-2.4.0/docs/../include/libvirt/libvirt-common.h … Only add the builddir to the search list if there is no pregenerated libvirt-common.h. Reuse the existing check that predates the libvirt.h → libvirt-common.h split and that probably was meant for exactly that. References: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=842452
-
由 Andrea Bolognani 提交于
Commit e8861f69 changed our spec file to compile and run tests in parallel. That's a very good step forward, but why stop there? Let's run *all* make jobs in parallel and really put those expensive cores to use! On my laptop, this shaves ~10s off 'make rpm'.
-