Commit 693eac38 was incomplete here.

When no <seclabel> is present in the XML, the virDomainSeclabelDef
struct is left as all zeros. Unfortunately, this means it gets setup
as type=dynamic, with relabel=no, which is an illegal combination.

Change the 'bool relabel' attribute in virDomainSeclabelDef to
the inverse 'bool norelabel' so that the default initialization
is sensible

* src/conf/domain_conf.c, src/conf/domain_conf.h,
  src/security/security_apparmor.c, src/security/security_selinux.c:
  Replace 'relabel' with 'norelabel'

Some callers expected virFileMakePath to set errno, some expected
it to return an errno value. Unify this to return 0 on success and
-1 on error. Set errno to report detailed error information.

Also optimize virFileMakePath if stat fails with an errno different
from ENOENT.

This patch adds #if HAVE_SASL where needed in libvirtd.h

add a new API pciDeviceReAttachInit() in pci.c to initialize state values for nodedev reattach

Initialize three state value of device driver to 1. This is just for a new call to
qemudNodeDeviceReAttach()

domain.rng, network.rng, and interface.rng already use a few of the
same types (or in some cases *should* but don't), and an upcoming code
change will have them sharing even more. To prepare for that, this
patch takes those common data type definitions and moves them into
basictypes.rng.

This may break some rule about the need to RNG files to be autonomous
or something, but I saw that storageencryption.rng is used in this
way, so I figured it must not be completely against the law...

Although most functions with flags check to verify no application is
passing in flag bits that are currently undefined, for some reason
this function wasn't.

* Change all flags args from int to unsigned int

* Allow passing flags in virDomainObjParseFile (and propogate those
  flags all the way down the call chain). Previously the flags were
  hardcoded (to VIR_DOMAIN_XML_INTERNAL_STATUS) several layers down
  the chain. Pass that value in at the one place that is currently
  calling virDomainObjParseFile.

Reported by Ruben Kerkhof.

virFileMakePath returns an errno value on error, that will never
be negative. An virFileMakePath error would have been ignored here,
instead of being reported correctly.

The struct A {} A; construct triggers a linker error on OSX about
duplicate symbols. This also differs from the common struct style.

Switch to common style to fix this.

Reported by Justin Clift.

The domain XML documentation is missing information about the
<seclabel> element used by security drivers

* formatdomain.html.in: Document <seclabel>

Add a new attribute to the <seclabel> XML to allow resource
relabelling to be enabled with static label usage.

  <seclabel model='selinux' type='static' relabel='yes'>
    <label>system_u:system_r:svirt_t:s0:c392,c662</label>
  </seclabel>

* docs/schemas/domain.rng: Add relabel attribute
* src/conf/domain_conf.c, src/conf/domain_conf.h: Parse
  the 'relabel' attribute
* src/qemu/qemu_process.c: Unconditionally clear out the
  'imagelabel' attribute
* src/security/security_apparmor.c: Skip based on 'relabel'
  attribute instead of label type
* src/security/security_selinux.c: Skip based on 'relabel'
  attribute instead of label type and fill in <imagelabel>
  attribute if relabel is enabled.

Normally the dynamic labelling mode will always use a base
label of 'svirt_t' for VMs. Introduce a <baselabel> field
in the <seclabel> XML to allow this base label to be changed

eg

   <seclabel type='dynamic' model='selinux'>
     <baselabel>system_u:object_r:virt_t:s0</baselabel>
   </seclabel>

* docs/schemas/domain.rng: Add <baselabel>
* src/conf/domain_conf.c, src/conf/domain_conf.h: Parsing
  of base label
* src/qemu/qemu_process.c: Don't reset 'model' attribute if
  a base label is specified
* src/security/security_apparmor.c: Refuse to support base label
* src/security/security_selinux.c: Use 'baselabel' when generating
  label, if available

virStorageBackendCreateRaw: createRawFile already reported the
exact error.

Before the fix:

error: Failed to create vol vol-create.img
error: cannot create path '/var/lib/libvirt/images/vol-create.img': Unknown error 18446744073709551597

After the fix:

error: Failed to create vol vol-create.img
error: cannot fill file '/var/lib/libvirt/images/vol-create.img': No space left on device

* configure.ac docs/news.html.in libvirt.spec.in: update for the
  new release
* po/*.po*: updated and regenerated localizations

cmd is not initialized to NULL, but we try to freed it if we
meet some error.

Coverity detected that we could crash on bogus input.  Meanwhile,
strtok_r is rather heavy compared to strchr.

* src/storage/storage_backend_iscsi.c (virStorageBackendIQNFound):
  Check for parse failure, and use lighter-weight functions.

* src/vmware/vmware_driver.c (vmwareDomainReboot): Check error
  before dereferencing memory.

Detected by Coverity.  qemuDomainEventQueue requires a non-NULL
pointer; most callers silently drop the event if we encountered
and OOM situation trying to create the event.

* src/qemu/qemu_migration.c (qemuMigrationFinish): Check for OOM.

Coverity noted that most clients reacted to failure to hash; but in
a best-effort kill loop, we can ignore failure.

* src/util/cgroup.c (virCgroupKillInternal): Ignore hash failure.

Coverity noted that 4 out of 5 calls to virNetClientStreamRaiseError
checked the return value.  This case expects a particular value, so
warn if our expectations went wrong due to some bug elsewhere.

* src/rpc/virnetclient.c (virNetClientCallDispatchStream): Warn on
  unexpected scenario.

Coverity warns if the majority of callers check a function for
errors, but a few don't; but in qemu_audit and qemu_domain, the
choice to not check for failures was safe.  In qemu_command, the
failure to generate a uuid can only occur on a bad pointer.

* src/qemu/qemu_audit.c (qemuAuditCgroup): Ignore failure to get
  cgroup controller.
* src/qemu/qemu_domain.c (qemuDomainObjEnterMonitor)
  (qemuDomainObjEnterMonitorWithDriver): Ignore failure to get
  timestamp.
* src/qemu/qemu_command.c (qemuParseCommandLine): Check for error.

Detected by Coverity.  The leak is on an error path, but I'm not
sure whether that path is likely to be triggered in practice.

* src/rpc/virnetserverservice.c (virNetServerServiceAccept): Plug leak.

Spotted by Coverity.  If we don't update tmp each time through
the loop, then if the filter being removed was not the head of
the list, we accidentally lose all filters prior to the one we
wanted to remove.

* src/rpc/virnetserverclient.c (virNetServerClientRemoveFilter):
    Don't lose unrelated filters.

Detected by Coverity.  Some, but not all, error paths were clean;
but they were repetitive so I refactored them.

* src/util/pci.c (pciGetDevice): Plug leak.

Detected by Coverity.  Unlikely to hit unless the file contents
were corrupted.

* src/util/interface.c (ifaceRestoreMacAddress): Plug leak.

Detected by Coverity; only strikes on OOM so not serious.

* daemon/libvirtd.c (daemonPidFilePath): Plug leak.

* tests/utiltest.c (DO_TEST): Fix indentation for cppi.

Move non-esx specific tests from esxutilstest there and add a
test for virParseVersionString.

To avoid regressions, we let callers specify whether to require a
minor and micro version.  Callers that were parsing uname() output
benefit from defaulting to 0, whereas callers that were parsing
version strings from other sources should not change in behavior.

* src/util/util.c (virParseVersionString): Allow caller to choose
whether to fail if minor or micro is missing.
* src/util/util.h (virParseVersionString): Update signature.
* src/esx/esx_driver.c (esxGetVersion): Update callers.
* src/lxc/lxc_driver.c (lxcVersion): Likewise.
* src/openvz/openvz_conf.c (openvzExtractVersionInfo): Likewise.
* src/uml/uml_driver.c (umlGetVersion): Likewise.
* src/vbox/vbox_MSCOMGlue.c (vboxLookupVersionInRegistry):
Likewise.
* src/vbox/vbox_tmpl.c (vboxExtractVersion): Likewise.
* src/vmware/vmware_conf.c (vmwareExtractVersion): Likewise.
* src/xenapi/xenapi_driver.c (xenapiGetVersion): Likewise.
Reported by Matthias Bolte.

According to the automake manual, CPPFLAGS (aka INCLUDES, as spelled
in automake 1.9.6) should only include -I, -D, and -U directives; more
generic directives like -Wall belong in CFLAGS since they affect more
phases of the build process.  Therefore, we should be sticking CFLAGS
additions into a CFLAGS container, not a CPPFLAGS container.

* src/Makefile.am (libvirt_driver_vmware_la_CFLAGS): Use AM_CFLAGS.
(INCLUDES): Move CFLAGS items...
(AM_CFLAGS): ...to their proper location.
* python/Makefile.am (INCLUDES, AM_CFLAGS): Likewise.
* tests/Makefile.am (INCLUDES, AM_CFLAGS): Likewise.
(commandtest_CFLAGS, commandhelper_CFLAGS)
(virnetmessagetest_CFLAGS, virnetsockettest_CFLAGS): Use AM_CFLAGS.

This fixes the problem of not finding python in /usr/bin
which broke build on FreeBSD

linux 3.0 has no micro version number, and that is causing problems
for virParseVersionString.  The patch below should allow for:
  major
  major.minor
  major.minor.micro

If major or minor are not present they just default to zero.
We found this in Ubuntu (https://bugs.launchpad.net/bugs/802977)

Detected by Coverity.  No real harm in leaving these, but fixing
them cuts down on the noise for future analysis.

* src/rpc/virnetserver.c (virNetServerAddService): Delete unused
entry.
* src/util/sysinfo.c (virSysinfoRead): Delete dead assignment to
base.

* tests/Makefile.am: Remove jsondata.h

EXTRA_DIST files should unconditionally be part of the tarball,
rather than depending on the presence of sanlock-devel.

Meanwhile, parallel builds could fail if we don't use mkdir -p.

* src/Makefile.am (EXTRA_DIST): Always ship sanlock .aug and
template .conf files.
(%-sanlock.conf): Use MKDIR_P.

For good or for bad, I did a fresh checkout, ./autogen.sh, then
'configure', then 'make syntax-check', and was surprised that it
failed.  Running 'make' before 'make syntax-check' cleaned up the
issue, but this patch makes it work up front.

* cfg.mk (sc_po_check): Add prerequisites.