- 16 7月, 2009 6 次提交
-
-
由 Daniel P. Berrange 提交于
after a libvirtd daemon restart with active guests * src/qemu_driver: Read and dicard pending monitor data before issuing new monitor commands.
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
* src/remote_internal.c: Disable libvirtd autostart if the LIBVIRT_AUTOSTART=0 env variable is set * src/libvirt.c: Document environment variables can impact the virConnectOpen API
-
由 Daniel Veillard 提交于
* tests/interfaceschematest: test all XML data against the interface schemas * tests/interfacexml2xmltest.c: parse and reserialize all XML data and check the output is identical * tests/Makefile.am: hook up the tests * tests/.gitignore: add ignore test
-
由 Daniel Veillard 提交于
* docs/schemas/interface.rng: schemas for the interface XML files directly imported from netcf-0.1.0 * tests/interfaceschemadata/*.xml: set of test files from netcf-0.1.0 changed to use single quote instead of double quote
-
由 Daniel Veillard 提交于
* src/interface_conf.c src/interface_conf.h: the import and export routines and the internal APIs * src/Makefile.am: hook the new file in the makefiles * src/libvirt_private.syms: export a few private symbols internally * po/POTFILES.in: the new file contains translatable strings
-
- 15 7月, 2009 3 次提交
-
-
test:///由 Daniel P. Berrange 提交于
* src/remote_internal.c: Ensure that all test:/// URIs are dealt with by the auto-started, per-user unprivileged libvirtd instances
-
由 Daniel P. Berrange 提交于
* qemud/remote.c: Send back the actual libvirt connection error rather than formatting a generic error for security driver methods * src/libvirt.c: Fix virDomainGetSecurityLabel, and virNodeGetSecurityModel to correctly set the error on the virConnectPtr object, and raise a full error rather than warning when not supported
-
由 Garry Dolley 提交于
-
- 13 7月, 2009 1 次提交
-
-
由 Garry Dolley 提交于
* docs/bugs.html[.in]: general tickets are under the 'Virtualization Tools' product category and Fedora specific tickets are under the 'Fedora' product category.
-
- 11 7月, 2009 2 次提交
-
-
由 Cole Robinson 提交于
The 'pipe' character type wasn't documented. TCP uses a <protocol> element, not <wire> We weren't doing strict validation for protocol and source mode values.
-
由 Cole Robinson 提交于
If the qemu_driver was not initialized (possibly due to an error on driver startup), we can segfault if attempting to connect to the URI.
-
- 10 7月, 2009 9 次提交
-
-
由 Jim Meyering 提交于
When "git pull" (or any other operation) brings in a new version of the gnulib git submodule, you must rerun the autogen.sh script. With this change, "make" now fails and tells you to run ./autogen.sh, when needed. * autogen.sh: Maintain a new file, .git-module-status, containing the current submodule status. If it doesn't exist or its content is different from what "git submodule status" prints, then run ./bootstrap * .gitignore: Add .git-module-status * cfg.mk: Diagnose out of date submodule and fail. * README-hacking: Update not to mention bootstrap. * Makefile.am (MAINTAINERCLEANFILES): Add .git-module-status, so that "make maintainerclean" will remove it.
-
由 Jim Meyering 提交于
* autogen.sh: Use "autoreconf -if" instead of open-coding it with manual and unconditional invocation of each separate tool.
-
由 Mark McLoughlin 提交于
* src/domain_conf.c: replace open coded chr type parsing with virDomainChrTypeFromString(), retaining the existing semantics where unknown types are silently mapped to the "null" type and "pty" is used if none is specified
-
由 Mark McLoughlin 提交于
We keep support for the pty based monitor so that we can re-connect to VMs started by older versions of libvirtd. * src/domain_conf.c: handle formatting and parsing unix monitors * src/qemu_driver.c: add qemudOpenMonitorUnix(), remove the monitor pty path searching from qemudFindCharDevicePTYs(), switch qemudStartVMDaemon() and qemuDomainXMLToNative() to using a unix monitor * tests/qemuxml2argvtest.c: switch to using a unix monitor * tests/qemuxml2argvdata/qemuxml2argv-*.args: update test data
-
由 Mark McLoughlin 提交于
There are no functional changes in this patch apart from adding the monitor type to the state XML. The patch mostly consists of switching to use virDomainChrDef every where to describe the monitor. * src/domain_conf.h: replace monitorpath with monitor_chr * src/domain_conf.c: handle parsing the monitor type and initializing monitor chr * src/qemu_conf.[ch]: make qemudBuildCommandLine take a virDomainChrDefPtr and use that to build the -monitor parameter * src/qemu_driver.c: split pty specific and common code from qemudOpenMonitor, have qemudStartVMDaemon() initialize monitor_chr * tests/qemuxml2argvtest.c: update for qemudBuildCommandLine() change
-
由 Mark McLoughlin 提交于
* src/qemu_driver.c: use a consistent coding style for function definitions
-
由 Mark McLoughlin 提交于
* src/qemu_driver.c: vm->monitorpath is already initialized in the case of re-connect, so move the initialization for the normal startup case out of the common code
-
由 Jim Meyering 提交于
* gnulib: Update submodule to latest. This fixes the make syntax-check failure whereby sc_po_check would complain about cfg.mk.
-
由 Jim Meyering 提交于
* .x-sc_avoid_if_before_free: Ignore *all* ChangeLog files, now, including ChangeLog-old.
-
- 09 7月, 2009 3 次提交
-
-
由 Daniel P. Berrange 提交于
* Makefile.am: List -I m4 first, in ACLOCAL_AMFLAGS * .gitignore: ignore gnulib/, ChangeLog, *rej, *orig, *#*# (emacs temporary files)
-
由 Jim Meyering 提交于
* README-hacking: New file. * bootstrap: Remove obsolete comments.
-
由 Jim Meyering 提交于
* Makefile.am (ACLOCAL_AMFLAGS): Search gnulib/m4/ before m4/.
-
- 08 7月, 2009 15 次提交
-
-
由 Jim Meyering 提交于
No longer maintain a version-controlled ChangeLog file, but do continue to include a ChangeLog file in distribution tarball. * Makefile.am (gen-ChangeLog): New rule. (dist-hook): Depend on it. (EXTRA_DIST): Add ChangeLog-old. * bootstrap (modules): Add gitlog-to-changelog. * ChangeLog: Remove file. Renamed to... * ChangeLog-old: ...this. New file. * autogen.sh: Touch ChangeLog, to ensure it exists. For automake.
-
由 Jim Meyering 提交于
* bootstrap (modules): Add gnumakefile and maintainer-makefile. * GNUmakefile: Remove file, now provided by gnulib. * Makefile.maint: Remove. Replaced by maint.mk from gnulib. .gitignore: Add GNUmakefile and maint.mk. * cfg.mk (prev_version_file): Disable this feature. Setting this to /dev/null avoids an otherwise harmless diagnostic.
-
由 Jim Meyering 提交于
-
由 Jim Meyering 提交于
This makes it so we record (via a git submodule) a snapshot of whatever version of gnulib we're using, and none of gnulib sources are in the libvirt repository. The result is that we have as much reproducibility as when we version-controlled imported copies of the gnulib sources, but without the hassle of the manual process we used when syncing with upstream. Note that when you clone libvirt, you get only the libvirt repository, but when you first run ./bootstrap, it clones gnulib (at the SHA1 recorded via the submodule), creating the .gnulib/ hierarchy. Then, the bootstrap script runs gnulib-tool to populate gnulib/ with the files that make up the selected modules. Put the following in your ~/.gitconfig file. [alias] syncsub = submodule foreach git pull origin master The update procedure is simple: git syncsub ...build & test... git commit -m 'gnulib: sync submodule to latest' .gnulib * .gitmodules: New file. * .gnulib: Initialize. * bootstrap: Set up to use the new submodule. Stop using --no-vc-files. Don't remove .gitignore files. Don't use or create .cvsignore. Diagnose an invalid --gnulib-srcdir=DIR argument. * build-aux/vc-list-files: Delete file, now pulled from gnulib. * build-aux/useless-if-before-free: Likewise. * po/POTFILES.in: Remove gnulib/lib/gai_strerror.c, since it no longer contains translatable strings. * gnulib/*: Remove gnulib/ hierarchy.
-
由 Jim Meyering 提交于
* cfg.mk (local-checks-to-skip): Add these: sc_error_message_uppercase, sc_program_name, sc_require_test_exit_idiom, sc_makefile_check.
-
由 Jim Meyering 提交于
Since Makefile.maint will soon come from gnulib's maint.mk, sync Makefile.maint to have the same contents (modulo minor things). In syncing it, we have to remove some libvirt-specific rules. Since we want to keep them (of course), put those in cfg.mk. * Makefile.maint: Merge from gnulib's maint.mk. * cfg.mk (sc_avoid_write): New rule. From Makefile.cfg. (sc_prohibit_strcmp_and_strncmp): Likewise, and rename. (sc_prohibit_asprintf, sc_prohibit_VIR_ERR_NO_MEMORY): Likewise. (sc_prohibit_nonreentrant): Likewise. (sc_prohibit_ctype_h): Likewise. (sc_TAB_in_indentation, sc_avoid_ctype_macros): Likewise. (sc_prohibit_virBufferAdd_with_string_literal): Likewise. (sc_prohibit_gethostby): Likewise. (sc_libvirt_unmarked_diagnostics): Likewise. Also, rename the rule, inserting "_libvirt", since this rule is a specialization of the one in gnulib. * GNUmakefile: Include cfg.mk, not Makefile.cfg * .x-sc_prohibit_strcmp_and_strncmp: New file. * Makefile.am (EXTRA_DIST): Add .x-sc_prohibit_strcmp_and_strncmp
-
由 Jim Meyering 提交于
* cfg.mk: ...this. New file.
-
由 Jim Meyering 提交于
Don't use mylibtool, (subsumed by automake's silent rules) Its use was causing a non-srcdir build to fail. * Makefile.am (EXTRA_DIST): Remove mylibtool. * configure.in: Don't use mylibtool. * configure.in: Use AM_SILENT_RULES([yes]), but only if that m4 macro is defined. Thus, it works even on systems that lack automake-1.11. Daniel Berrange suggested adding the conditional, so that we don't have a hard requirement on 1.11, e.g., for RHEL5.
-
由 Jim Meyering 提交于
It failed in a non-srcdir build because those 5 sample output files were not included in the distribution tarball. Include them. * tests/Makefile.am (qemuhelpdata, EXTRA_DIST): Include these: kvm-74, kvm-86, qemu-0.10.5, qemu-0.9.1, qemu-kvm-0.10.5.
-
由 Jim Meyering 提交于
* docs/Makefile.am (xml): Distribute testpool.xml and testvol.xml, which are referenced from testnode.xml.
-
由 Daniel P. Berrange 提交于
* tests/testutils.c: Don't discard stderr when running external programs during tests
-
由 Daniel P. Berrange 提交于
* src/qemu_conf.c, src/qemu_conf.h: Use -vga or -std-vga when starting guests if video card is present * tests/qemuhelptest.c: Change to use constants instead of hardcoded hex numbers, and add VGA support * tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl-fullscreen.xml, tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl.args, tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl.xml, tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.args, tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.xml, tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-tls.xml, tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc.xml, tests/qemuxml2argvdata/qemuxml2argv-input-xen.xml: Add <video> element for testing graphics adapter * tests/qemuxml2argvtest.c: Add QEMUD_CMD_FLAG_VGA flag * tests/qemuxml2xmltest.c: Add missing graphics-vnc-sasl/tls tests
-
由 Daniel P. Berrange 提交于
* docs/schemas/domain.rng: Define <video> element schema * src/domain_conf.c, src/domain_conf.h, src/libvirt_private.syms: Add parsing and formatting for <video> element
-
由 Daniel Veillard 提交于
* src/network_driver.c src/node_device.c src/storage_driver.c: many places in the code reported 'No xxx with matching name" after a Lookup error without reporting the name used by the failed lookup
-
由 Harshavardhana 提交于
* src/storage_conf.c src/storage_conf.h: adds glusterfs to the list of network storage * libvirt.spec.in: adds the dependency on glusterfs-client
-
- 07 7月, 2009 1 次提交
-
-
由 Paolo Bonzini 提交于
* src/qemu_conf.c: when connecting an interface if it reference an undefined network, then we used to raise an internal error.
-