When the last reference to a virConnectPtr is released by
libvirtd, it was possible for a deadlock to occur in the
virDomainEventState functions. The virDomainEventStatePtr
holds a reference on virConnectPtr for each registered
callback. When removing a callback, the virUnrefConnect
function is run. If this causes the last reference on the
virConnectPtr to be released, then virReleaseConnect can
be run, which in turns calls qemudClose. This function has
a call to virDomainEventStateDeregisterConn which is intended
to remove all callbacks associated with the virConnectPtr
instance. This will try to grab a lock on virDomainEventState
but this lock is already held. Deadlock ensues

Thread 1 (Thread 0x7fcbb526a840 (LWP 23185)):

Since each callback associated with a virConnectPtr holds a
reference on virConnectPtr, it is impossible for the qemudClose
method to be invoked while any callbacks are still registered.
Thus the call to virDomainEventStateDeregisterConn must in fact
be a no-op. Thus it is possible to just remove all trace of
virDomainEventStateDeregisterConn and avoid the deadlock.

* src/conf/domain_event.c, src/conf/domain_event.h,
  src/libvirt_private.syms: Delete virDomainEventStateDeregisterConn
* src/libxl/libxl_driver.c, src/lxc/lxc_driver.c,
  src/qemu/qemu_driver.c, src/uml/uml_driver.c: Remove
  calls to virDomainEventStateDeregisterConn

This patch introduces a new event type for the QMP event
SUSPEND:

    VIR_DOMAIN_EVENT_ID_PMSUSPEND

The event doesn't take any data, but considering there might
be reason for wakeup in future, the callback definition is:

typedef void
(*virConnectDomainEventSuspendCallback)(virConnectPtr conn,
                                        virDomainPtr dom,
                                        int reason,
                                        void *opaque);

"reason" is unused currently, always passes "0".

This patch introduces a new event type for the QMP event
WAKEUP:

    VIR_DOMAIN_EVENT_ID_PMWAKEUP

The event doesn't take any data, but considering there might
be reason for wakeup in future, the callback definition is:

typedef void
(*virConnectDomainEventWakeupCallback)(virConnectPtr conn,
                                       virDomainPtr dom,
                                       int reason,
                                       void *opaque);

"reason" is unused currently, always passes "0".

This patch introduces a new event type for the QMP event
DEVICE_TRAY_MOVED, which occurs when the tray of a removable
disk is moved (i.e opened or closed):

    VIR_DOMAIN_EVENT_ID_TRAY_CHANGE

The event's data includes the device alias and the reason
for tray status' changing, which indicates why the tray
status was changed. Thus the callback definition for the event
is:

enum {
    VIR_DOMAIN_EVENT_TRAY_CHANGE_OPEN = 0,
    VIR_DOMAIN_EVENT_TRAY_CHANGE_CLOSE,

\#ifdef VIR_ENUM_SENTINELS
    VIR_DOMAIN_EVENT_TRAY_CHANGE_LAST
\#endif
} virDomainEventTrayChangeReason;

typedef void
(*virConnectDomainEventTrayChangeCallback)(virConnectPtr conn,
                                           virDomainPtr dom,
                                           const char *devAlias,
                                           int reason,
                                           void *opaque);

Commit d09f6ba5 introduced a regression in event
registration.  virDomainEventCallbackListAddID() will only return a positive
integer if the type of event being registered is VIR_DOMAIN_EVENT_ID_LIFECYCLE.
For other event types, 0 is always returned on success.  This has the
unfortunate side effect of not enabling remote event callbacks because
remoteDomainEventRegisterAny() uses the return value from the local call to
determine if an event callback needs to be registered on the remote end.

Make sure virDomainEventCallbackListAddID() returns the callback count for the
eventID being registered.
Signed-off-by: NAdam Litke <agl@us.ibm.com>

The lifetime of the virDomainEventState object is tied to
the lifetime of the driver, which in stateless drivers is
tied to the lifetime of the virConnectPtr.

If we add & remove a timer when allocating/freeing the
virDomainEventState object, we can get a situation where
the timer still triggers once after virDomainEventState
has been freed. The timeout callback can't keep a ref
on the event state though, since that would be a circular
reference.

The trick is to only register the timer when a callback
is registered with the event state & remove the timer
when the callback is unregistered.

The demo for the bug is to run

  while true ; do date ; ../tools/virsh -q -c test:///default 'shutdown test; undefine test; dominfo test' ; done

prior to this fix, it will frequently hang and / or
crash, or corrupt memory

Currently all drivers using domain events need to provide a callback
for handling a timer to dispatch events in a clean stack. There is
no technical reason for dispatch to go via driver specific code. It
could trivially be dispatched directly from the domain event code,
thus removing tedious boilerplate code from all drivers

Also fix the libxl & xen drivers to pass 'true' when creating the
virDomainEventState, since they run inside the daemon & thus always
expect events to be present.

* src/conf/domain_event.c, src/conf/domain_event.h: Internalize
  dispatch of events from timer callback
* src/libxl/libxl_driver.c, src/lxc/lxc_driver.c,
  src/qemu/qemu_domain.c, src/qemu/qemu_driver.c,
  src/remote/remote_driver.c, src/test/test_driver.c,
  src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
  src/xen/xen_driver.c: Remove all timer dispatch functions

The virDomainEventCallbackList and virDomainEventQueue APIs are
now solely helpers used internally by virDomainEventState APIs.
Remove their decls from domain_event.h since no driver code should
need to use them any more.

* src/conf/domain_event.c: Make virDomainEventCallbackList and
  virDomainEventQueue APIs static & remove some unused APIs
* src/conf/domain_event.h, src/libvirt_private.syms: Remove
  virDomainEventCallbackList and virDomainEventQueue APIs

No caller of the domain events APIs should need to poke at the
struct internals. Thus they should all be removed from the
header file

* src/conf/domain_event.h: Remove struct definitions
* src/conf/domain_event.c: Add struct definitions

While virDomainEventState has APIs for managing removal of callbacks,
while locked, adding callbacks in the first place requires direct
access to the virDomainEventCallbackList structure. This is not
threadsafe since it is bypassing the virDomainEventState locks

* src/conf/domain_event.c, src/conf/domain_event.h,
  src/libvirt_private.syms: Add APIs for managing callbacks
  via virDomainEventState.

When registering a callback for a particular event some callers
need to know how many callbacks already exist for that event.
While it is possible to ask for a count, this is not free from
race conditions when threaded. Thus the API for registering
callbacks should return the count of callbacks. Also rename
virDomainEventStateDeregisterAny to virDomainEventStateDeregisterID

* src/conf/domain_event.c, src/conf/domain_event.h,
  src/libvirt_private.syms: Return count of callbacks when
  registering callbacks
* src/libxl/libxl_driver.c, src/libxl/libxl_driver.c,
  src/qemu/qemu_driver.c, src/remote/remote_driver.c,
  src/remote/remote_driver.c, src/uml/uml_driver.c,
  src/vbox/vbox_tmpl.c, src/xen/xen_driver.c: Update
  for change in APIs

The Xen & VBox drivers deal with callbacks & dispatching of
events directly. All the other drivers use a timer to dispatch
events from a clean stack state, rather than deep inside the
drivers. Convert Xen & VBox over to virDomainEventState so
that they match behaviour of other drivers

* src/conf/domain_event.c: Return count of remaining
  callbacks when unregistering event callback
* src/vbox/vbox_tmpl.c, src/xen/xen_driver.c,
  src/xen/xen_driver.h: Convert to virDomainEventState

https://bugzilla.redhat.com/show_bug.cgi?id=648855 mentioned a
misuse of 'an' where 'a' is proper; that has since been fixed,
but a search found other problems (some were a spelling error for
'and', while most were fixed by 'a').

* daemon/stream.c: Fix grammar.
* src/conf/domain_conf.c: Likewise.
* src/conf/domain_event.c: Likewise.
* src/esx/esx_driver.c: Likewise.
* src/esx/esx_vi.c: Likewise.
* src/rpc/virnetclient.c: Likewise.
* src/rpc/virnetserverprogram.c: Likewise.
* src/storage/storage_backend_fs.c: Likewise.
* src/util/conf.c: Likewise.
* src/util/dnsmasq.c: Likewise.
* src/util/iptables.c: Likewise.
* src/xen/xen_hypervisor.c: Likewise.
* src/xen/xend_internal.c: Likewise.
* src/xen/xs_internal.c: Likewise.
* tools/virsh.c: Likewise.

If a disk source gets dropped because it is not accessible,
mgmt application might want to be informed about this. Therefore
we need to emit an event. The event presented in this patch
is however a bit superset of what written above. The reason is simple:
an intention to be easily expanded, e.g. on 'user ejected disk
in guest' events. Therefore, callback gets source string and disk alias
(which should be unique among a domain) and reason (an integer);

Currently, push & pop from event queue (both server & client side)
rely on lock from higher levels, e.g. on driver lock (qemu),
private_data (remote), ...; This alone is not sufficient as not
every function that interacts with this queue can/does lock,
esp. in client where we have a different approach, "passing
the buck".

Therefore we need a separate lock just to protect event queue.

For more info see:
https://bugzilla.redhat.com/show_bug.cgi?id=743817

* src/qemu/qemu_driver.c (qemuDomainSaveInternal): Fix typo.
* src/conf/domain_event.c (virDomainEventDispatchMatchCallback):
Likewise.
* daemon/libvirtd.c (daemonRunStateInit): Likewise.
* src/lxc/lxc_container.c (lxcContainerChildMountSort): Likewise.
* src/util/virterror.c (virCopyError, virRaiseErrorFull): Likewise.
* src/xenxs/xen_sxpr.c (xenParseSxprSound): Likewise.

When an operation started by virDomainBlockPull completes (either with
success or with failure), raise an event to indicate the final status.
This API allow users to avoid polling on virDomainGetBlockJobInfo if
they would prefer to use an event mechanism.

* daemon/remote.c: Dispatch events to client
* include/libvirt/libvirt.h.in: Define event ID and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
  src/libvirt_private.syms: Extend API to handle the new event
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
  for block_stream completion and emit a libvirt block pull event
* src/remote/remote_driver.c: Receive and dispatch events to application
* src/remote/remote_protocol.x: Wire protocol definition for the event
* src/remote_protocol-structs: structure definitions for protocol verification
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c: Watch for BLOCK_STREAM_COMPLETED event
  from QEMU monitor

* src/conf/domain_event.c (virDomainEventDispatch): Fix typo.
* src/internal.h (ATTRIBUTE_FMT_PRINTF): Likewise.
* src/libvirt.c (virStreamEventUpdateCallback): Likewise.
* src/remote/remote_driver.c (doRemoteOpen): Likewise.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Likewise.
* src/util/virterror.c (virConnCopyLastError, virCopyLastError):
Likewise.
* src/xen/xend_internal.h (xend_wait_for_devices): Likewise.

This reverts commit 12cd77a0.

Conflicts:

	python/libvirt-override-virConnect.py
	python/libvirt-override.c
	src/remote/remote_protocol.x

Since we virEventRegisterDefaultImpl is now a public API, callers need
a way to invoke the default registered Handle and Timeout functions. We
already have general functions for these internally, so promote
them to the public API.

v2:
    Actually add APIs to libvirt.h

When an operation started by virDomainBlockPullAll completes (either with
success or with failure), raise an event to indicate the final status.  This
allows an API user to avoid polling on virDomainBlockPullInfo if they would
prefer to use the event mechanism.

* daemon/remote.c: Dispatch events to client
* include/libvirt/libvirt.h.in: Define event ID and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
  src/libvirt_private.syms: Extend API to handle the new event
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
  for block_stream completion and emit a libvirt block pull event
* src/remote/remote_driver.c: Receive and dispatch events to application
* src/remote/remote_protocol.x: Wire protocol definition for the event
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c: Watch for BLOCK_STREAM_COMPLETED event
  from QEMU monitor
Signed-off-by: NAdam Litke <agl@us.ibm.com>

Detected by Coverity.  Introduced in commit aaf2b70b, and turned into
a regression in the next few commits through 4e6e6672 (unreleased).

* src/conf/domain_event.c (virDomainEventStateFree): Free object,
per documentation.

This introduces a new domain

  VIR_DOMAIN_EVENT_ID_CONTROL_ERROR

Which uses the existing generic callback

typedef void (*virConnectDomainEventGenericCallback)(virConnectPtr conn,
                                                     virDomainPtr dom,
                                                     void *opaque);

This event is intended to be emitted when there is a failure in
some part of the domain virtualization system. Whether the domain
continues to run/exist after the failure is an implementation
detail specific to the hypervisor.

The idea is that with some types of failure, hypervisors may
prefer to leave the domain running in a "degraded" mode of
operation. For example, if something goes wrong with the QEMU
monitor, it is possible to leave the guest OS running quite
happily. The mgmt app will simply loose the ability todo various
tasks. The mgmt app can then choose how/when to deal with the
failure that occured.
* daemon/remote.c: Dispatch of new event
* examples/domain-events/events-c/event-test.c: Demo catch
  of event
* include/libvirt/libvirt.h.in: Define event ID and callback
* src/conf/domain_event.c, src/conf/domain_event.h: Internal
  event handling
* src/remote/remote_driver.c: Receipt of new event from daemon
* src/remote/remote_protocol.x: Wire protocol for new event
* src/remote_protocol-structs: add new event for checks

The same code for queueing, flushing, and deregistering events exists
in multiple drivers, which will soon use these common functions.

v2:
    Adjust libvirt_private.syms
    isDispatching bool fixes
    NONNULL tagging

v3:
    Add requireTimer parameter to virDomainEventStateNew

This structure will be used to unify lots of duplicated event handling code
across the state drivers.

v2:
    Check for state == NULL in StateFree
    Add NONNULL tagging
    Use bool for isDispatching
Signed-off-by: NCole Robinson <crobinso@redhat.com>

This will be used in the ESX driver event handling.

And from all related macros and functions.

The extra data isn't being free()'d for IO error events that have a reason.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

If the IO error event does not include a reason, then there
is a possible crash dispatching the event

* src/conf/domain_event.c: Missing check for a NULL reason before
  strduping allows for a crash

This introduces a new event type

   VIR_DOMAIN_EVENT_ID_IO_ERROR_REASON

This event is the same as the previous VIR_DOMAIN_ID_IO_ERROR
event, but also includes a string describing the cause of
the event.

Thus there is a new callback definition for this event type

typedef void (*virConnectDomainEventIOErrorReasonCallback)(virConnectPtr conn,
                                                           virDomainPtr dom,
                                                           const char *srcPath,
                                                           const char *devAlias,
                                                           int action,
                                                           const char *reason,
                                                           void *opaque);

This is currently wired up to the QEMU block IO error events

* daemon/remote.c: Dispatch IO error events to client
* examples/domain-events/events-c/event-test.c: Watch for
  IO error events
* include/libvirt/libvirt.h.in: Define new IO error event ID
  and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
  src/libvirt_private.syms: Extend API to handle IO error events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
  for block IO errors and emit a libvirt IO error event
* src/remote/remote_driver.c: Receive and dispatch IO error
  events to application
* src/remote/remote_protocol.x: Wire protocol definition for
  IO error events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c: Watch for BLOCK_IO_ERROR event
  from QEMU monitor

In a couple of cases typos meant we were firing the wrong type
of event. In the python code my previous commit accidentally
missed some chunks of the code.

* python/libvirt-override-virConnect.py: Add missing python glue
  accidentally left out of previous commit
* src/conf/domain_event.c, src/qemu/qemu_monitor_json.c: Fix typos
  in event name / method name to invoke

* src/conf/domain_event.c (virDomainEventGraphicsNewFromDom):
Return NULL when handling out-of-memory error, rather than
falling through with ev=NULL and then assigning to ev->member.
(virDomainEventGraphicsNewFromObj): Likewise.

This introduces a new event type

   VIR_DOMAIN_EVENT_ID_GRAPHICS

The same event can be emitted in 3 scenarios

  typedef enum {
      VIR_DOMAIN_EVENT_GRAPHICS_CONNECT = 0,
      VIR_DOMAIN_EVENT_GRAPHICS_INITIALIZE,
      VIR_DOMAIN_EVENT_GRAPHICS_DISCONNECT,
  } virDomainEventGraphicsPhase;

Connect/disconnect are triggered at socket accept/close.
The initialize phase is immediately after the protocol
setup and authentication has completed. ie when the
client is authorized and about to start interacting with
the graphical desktop

This event comes with *a lot* of potential information

 - IP address, port & address family of client
 - IP address, port & address family of server
 - Authentication scheme (arbitrary string)
 - Authenticated subject identity. A subject may have
   multiple identities with some authentication schemes.
   For example, vencrypt+sasl results in a x509dname
   and saslUsername identities.

This results in a very complicated callback :-(

   typedef enum {
      VIR_DOMAIN_EVENT_GRAPHICS_ADDRESS_IPV4,
      VIR_DOMAIN_EVENT_GRAPHICS_ADDRESS_IPV6,
   } virDomainEventGraphicsAddressType;

   struct _virDomainEventGraphicsAddress {
       int family;
       const char *node;
       const char *service;
   };
   typedef struct _virDomainEventGraphicsAddress virDomainEventGraphicsAddress;
   typedef virDomainEventGraphicsAddress *virDomainEventGraphicsAddressPtr;

   struct _virDomainEventGraphicsSubject {
      int nidentity;
      struct {
          const char *type;
          const char *name;
      } *identities;
   };
   typedef struct _virDomainEventGraphicsSubject virDomainEventGraphicsSubject;
   typedef virDomainEventGraphicsSubject *virDomainEventGraphicsSubjectPtr;

   typedef void (*virConnectDomainEventGraphicsCallback)(virConnectPtr conn,
                                                         virDomainPtr dom,
                                                         int phase,
                                                         virDomainEventGraphicsAddressPtr local,
                                                         virDomainEventGraphicsAddressPtr remote,
                                                         const char *authScheme,
                                                         virDomainEventGraphicsSubjectPtr subject,
                                                         void *opaque);

The wire protocol is similarly complex

   struct remote_domain_event_graphics_address {
     int family;
     remote_nonnull_string node;
     remote_nonnull_string service;
   };

   const REMOTE_DOMAIN_EVENT_GRAPHICS_IDENTITY_MAX = 20;

   struct remote_domain_event_graphics_identity {
     remote_nonnull_string type;
     remote_nonnull_string name;
   };

   struct remote_domain_event_graphics_msg {
     remote_nonnull_domain dom;
     int phase;
     remote_domain_event_graphics_address local;
     remote_domain_event_graphics_address remote;
     remote_nonnull_string authScheme;
     remote_domain_event_graphics_identity subject<REMOTE_DOMAIN_EVENT_GRAPHICS_IDENTITY_MAX>;
   };

This is currently implemented in QEMU for the VNC graphics
protocol, but designed to be usable with SPICE graphics in
the future too.

* daemon/remote.c: Dispatch graphics events to client
* examples/domain-events/events-c/event-test.c: Watch for
  graphics events
* include/libvirt/libvirt.h.in: Define new graphics event ID
  and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
  src/libvirt_private.syms: Extend API to handle graphics events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
  for VNC events and emit a libvirt graphics event
* src/remote/remote_driver.c: Receive and dispatch graphics
  events to application
* src/remote/remote_protocol.x: Wire protocol definition for
  graphics events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c: Watch for VNC_CONNECTED,
  VNC_INITIALIZED & VNC_DISCONNETED events from QEMU monitor

This introduces a new event type

   VIR_DOMAIN_EVENT_ID_IO_ERROR

This event includes the action that is about to be taken
as a result of the watchdog triggering

  typedef enum {
     VIR_DOMAIN_EVENT_IO_ERROR_NONE = 0,
     VIR_DOMAIN_EVENT_IO_ERROR_PAUSE,
     VIR_DOMAIN_EVENT_IO_ERROR_REPORT,
  } virDomainEventIOErrorAction;

In addition it has the source path of the disk that had the
error and its unique device alias. It does not include the
target device name (/dev/sda), since this would preclude
triggering IO errors from other file backed devices (eg
serial ports connected to a file)

Thus there is a new callback definition for this event type

typedef void (*virConnectDomainEventIOErrorCallback)(virConnectPtr conn,
                                                     virDomainPtr dom,
                                                     const char *srcPath,
                                                     const char *devAlias,
                                                     int action,
                                                     void *opaque);

This is currently wired up to the QEMU block IO error events

* daemon/remote.c: Dispatch IO error events to client
* examples/domain-events/events-c/event-test.c: Watch for
  IO error events
* include/libvirt/libvirt.h.in: Define new IO error event ID
  and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
  src/libvirt_private.syms: Extend API to handle IO error events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
  for block IO errors and emit a libvirt IO error event
* src/remote/remote_driver.c: Receive and dispatch IO error
  events to application
* src/remote/remote_protocol.x: Wire protocol definition for
  IO error events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c: Watch for BLOCK_IO_ERROR event
  from QEMU monitor

This introduces a new event type

   VIR_DOMAIN_EVENT_ID_WATCHDOG

This event includes the action that is about to be taken
as a result of the watchdog triggering

 typedef enum {
     VIR_DOMAIN_EVENT_WATCHDOG_NONE = 0,
     VIR_DOMAIN_EVENT_WATCHDOG_PAUSE,
     VIR_DOMAIN_EVENT_WATCHDOG_RESET,
     VIR_DOMAIN_EVENT_WATCHDOG_POWEROFF,
     VIR_DOMAIN_EVENT_WATCHDOG_SHUTDOWN,
     VIR_DOMAIN_EVENT_WATCHDOG_DEBUG,
 } virDomainEventWatchdogAction;

Thus there is a new callback definition for this event type

 typedef void (*virConnectDomainEventWatchdogCallback)(virConnectPtr conn,
                                                       virDomainPtr dom,
                                                       int action,
                                                       void *opaque);

* daemon/remote.c: Dispatch watchdog events to client
* examples/domain-events/events-c/event-test.c: Watch for
  watchdog events
* include/libvirt/libvirt.h.in: Define new watchdg event ID
  and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
  src/libvirt_private.syms: Extend API to handle watchdog events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
  for watchdogs and emit a libvirt watchdog event
* src/remote/remote_driver.c: Receive and dispatch watchdog
  events to application
* src/remote/remote_protocol.x: Wire protocol definition for
  watchdog events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c: Watch for WATCHDOG event
  from QEMU monitor

This introduces a new event type

   VIR_DOMAIN_EVENT_ID_RTC_CHANGE

This event includes the new UTC offset measured in seconds.
Thus there is a new callback definition for this event type

 typedef void (*virConnectDomainEventRTCChangeCallback)(virConnectPtr conn,
                                                        virDomainPtr dom,
                                                        long long utcoffset,
                                                        void *opaque);

If the guest XML configuration for the <clock> is set to
offset='variable', then the XML will automatically be
updated with the new UTC offset value. This ensures that
during migration/save/restore the new offset is preserved.

* daemon/remote.c: Dispatch RTC change events to client
* examples/domain-events/events-c/event-test.c: Watch for
  RTC change events
* include/libvirt/libvirt.h.in: Define new RTC change event ID
  and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
  src/libvirt_private.syms: Extend API to handle RTC change events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
  for RTC changes and emit a libvirt RTC change event
* src/remote/remote_driver.c: Receive and dispatch RTC change
  events to application
* src/remote/remote_protocol.x: Wire protocol definition for
  RTC change events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c: Watch for RTC_CHANGE event
  from QEMU monitor

The reboot event is not a normal lifecycle event, since the
virtual machine on the host does not change state. Rather the
guest OS is resetting the virtual CPUs. ie, the QEMU process
does not restart. Thus, this does not belong in the current
lifecycle events callback.

This introduces a new event type

    VIR_DOMAIN_EVENT_ID_REBOOT

It takes no parameters, besides the virDomainPtr, so it can
use the generic callback signature.

* daemon/remote.c: Dispatch reboot events to client
* examples/domain-events/events-c/event-test.c: Watch for
  reboot events
* include/libvirt/libvirt.h.in: Define new reboot event ID
* src/conf/domain_event.c, src/conf/domain_event.h,
  src/libvirt_private.syms: Extend API to handle reboot events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
  for reboots and emit a libvirt reboot event
* src/remote/remote_driver.c: Receive and dispatch reboot
  events to application
* src/remote/remote_protocol.x: Wire protocol definition for
  reboot events

The current internal domain events API tracks callbacks based on
the function pointer, and only supports lifecycle events. This
adds new internal APIs for registering callbacks for other event
types. These new APIs are postfixed with the word 'ID' to indicate
that they operated based on event ID, instead of hardcoded to
lifecycle events

* src/conf/domain_event.c, src/conf/domain_event.h,
  src/libvirt_private.syms: Add new APIs for handling callbacks
  for non-lifecycle events

The internal domain events APIs are designed to handle the lifecycle
events. This needs to be refactored to allow arbitrary new event
types to be handled.

 * The signature of virDomainEventDispatchFunc changes to use
   virConnectDomainEventGenericCallback instead of the lifecycle
   event specific virConnectDomainEventCallback
 * Every registered callback gains a unique ID to allow its
   removal based on ID, instead of function pointer
 * Every registered callback gains an 'eventID' to allow callbacks
   for different types of events to be distinguished
 * virDomainEventDispatch is adapted to filter out callbacks
   whose eventID does not match the eventID of the event being
   dispatched
 * virDomainEventDispatch is adapted to filter based on the
   domain name and uuid, if this filter is set for a callback.
 * virDomainEvent type/detail fields are moved into a union to
   allow different data fields for other types of events to be
   added later

* src/conf/domain_event.h, src/conf/domain_event.c: Refactor
  to allow handling of different types of events
* src/lxc/lxc_driver.c, src/qemu/qemu_driver.c,
  src/remote/remote_driver.c, src/test/test_driver.c,
  src/xen/xen_driver.c: Change dispatch function signature
  to use virConnectDomainEventGenericCallback