If attaching to a qemu process fails after opening the monitor socket
libvirt does not clean up the monitor. As the monitor also holds a
reference to the domain object the qemu attach API basically leaks it.

QEMU also does not interact on a second monitor connection and thus a
further attempt to attach to it would lock up.

Prevent libvirt from leaking the monitor by explicitly closing it.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1378401

Attaching to a existing qemu process allows to get us into a situation
when qemu is new enough to have JSON monitor and new vCPU hotplug but
the json monitor is not used. The vCPU detection code would require it
though. This broke attaching to qemu processes.

Make the condition less strict and just skip the vCPU hotplug detection
if JSON monitor is not available.

Resolves one of the symptoms in:
https://bugzilla.redhat.com/show_bug.cgi?id=1378401

Libvirt, on its own, shouldn't decide whether an expired lease should
stay in the custom leases database or not. It should rather rely on
the 'DEL' event from dnsmasq.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

The NSS module shouldn't rely on custom leases database to not have
entries for leases which have expired.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

We are about to add 6 new values to fetch. This will put us over the
current limit of 16 (we're at 13 now).

Once there are more than 16 parameters, this will affect existing clients
that attempt to fetch blockiotune config values for the domain from the
remote host since the server side has no mechanism to determine whether
the capability for the emulator exists and thus would attempt to return
all known values from the persistentDef. If attempting to fetch the
blockiotune values from a running domain, the code will check the emulator
capabilities and set maxparams (in qemuDomainGetBlockIoTune) appropriately.

On the client side of the remote connection, it uses this constant in
xdr_remote_domain_get_block_io_tune_ret and virTypedParamsDeserialize
calls, so if a remote server returns more than 16 parameters, then the
client will fail with "Unable to decode message payload".
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

The REMOTE_DOMAIN_MEMORY_PARAMETERS_MAX was erroneously used in the
remoteDomainBlockStatsFlags and remoteDomainGetBlockIoTune calls. Change
the constant to be the right one.

Fortunately, all 3 are defined as 16.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

* docs/news.html.in: updated for release
* po/*.po*: regenerated

This breaks vCPU hotplug, because when starting a domain, we
create a copy of domain definition (which becomes live XML) and
during the post parse callbacks we might adjust some tunings so
that vCPU hotplug is possible.

This reverts commit 581b7756.

This breaks vCPU hotplug, because when starting a domain, we
create a copy of domain definition (which becomes live XML) and
during the post parse callbacks we might adjust some tunings so
that vCPU hotplug is possible.

This reverts commit c0f90799.

Certain operations may make the vcpu order information invalid. Since
the order is primarily used to ensure migration compatibility and has
basically no other user benefits, clear the order prior to certain
operations and document that it may be cleared.

All the operations that would clear the order can still be properly
executed by defining a new domain configuration rather than using the
helper APIs.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1370357

virDomainDefSetVcpus was not designed to handle coldplug of vcpus now
that we can set state of vcpus individually.

Introduce qemuDomainSetVcpusConfig that properly handles state changes
of vcpus when coldplugging so that invalid configurations are not
created.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1375939

The current code that validates duplicate vcpu order would not work
properly if the order would exceed def->maxvcpus. Limit the order to the
interval described.

Allocate a one larger bitmap rather than shifting the indexes back to
zero.

The bitmap indexes for the order duplicate check are shifted to 0 since
vcpu order 0 is not allowed. The error message doesn't need such
treating though.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1370360

When support was added for the kvm hidden='on' attribute in commit
d07116, the version requirement was listed as "2.1.0 (QEMU
only)". However, this was added when libvirt was at version 1.2.8 - it
is *QEMU* that must be at version 2.1.0 or later.

This went unnoticed for a very long time (over 2 years). Then a week
or two ago a new Windows convert in the #virt channel on OFTC was told
he needed to use this feature (to prevent nvidia drivers in a guest
from refusing to work due to being run in a virtual machine). There
was some problem with it being recognized and "someone" (it may have
been me, or may have been someone else, I don't remember) pointed out
that the documentation at

  http://www.libvirt.org/formatdomain.html

says that it requires libvirt 2.1.0. The next several days were filled
with agony as a new convert to Linux first tried to upgrade a Linux
Mint host running their "LTS" version to something newer, then tried
to install a libvirt build built for Ubuntu onto this, and later back
to the old LTS Linux Mint. After this he tried building his own
libvirt from source (with all the expected problems), and finally
switched to Fedora. In the end it was hours and hours of everybody's
lives that they will never get back. To now learn that he didn't need
to do this (his original libvirt version was 1.3.3, so whatever his
problem was, it was elsewhere) makes the pain all that much worse.

To prevent this from happening again, this simple patch changes the
version requirement for the kvm hidden attribute from "2.1.0 (QEMU
only)" to "1.2.8 (QEMU 2.1.0)".

https://bugzilla.redhat.com/show_bug.cgi?id=1292984

Hold on to your hats, because this is gonna be wild.

In bd3e16a3 I've tried to expose sanlock io_timeout. What I had
not realized (because there is like no documentation for sanlock
at all) was very unusual way their APIs work. Basically, what we
do currently is:

    sanlock_add_lockspace_timeout(&ls, io_timeout);

which adds a lockspace to sanlock daemon. One would expect that
io_timeout sets the io_timeout for it. Nah! That's where you are
completely off the tracks. It sets timeout for next lockspace you
will probably add later. Therefore:

   sanlock_add_lockspace_timeout(&ls, io_timeout = 10);
   /* adds new lockspace with default io_timeout */

   sanlock_add_lockspace_timeout(&ls, io_timeout = 20);
   /* adds new lockspace with io_timeout = 10 */

   sanlock_add_lockspace_timeout(&ls, io_timeout = 40);
   /* adds new lockspace with io_timeout = 20 */

And so on. You get the picture.
Fortunately, we don't allow setting io_timeout per domain or per
domain disk. So we just need to set the default used in the very
first step and hope for the best (as all the io_timeout-s used
later will have the same value).
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Currently, we are checking for sanlock_add_lockspace_timeout
which is good for now. But in a subsequent patch we are going to
use sanlock_write_lockspace (which sets an initial value for io
timeout for sanlock). Now, there is no reason to check for both
functions in sanlock library as the sanlock_write_lockspace was
introduced in 2.7 release and the one we are currently checking
for in the 2.5 release. Therefore it is safe to assume presence
of sanlock_add_lockspace_timeout when sanlock_write_lockspace
is detected.

Moreover, the macro for conditional compilation is renamed to
HAVE_SANLOCK_IO_TIMEOUT (as it now encapsulates two functions).
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Global variables are bad, we should avoid using them.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

If this reminds you of a commit message from around a year ago, it's
41c2aa72 and yes, we're dealing with
"the same thing" again.  Or f309db1f and
it's similar.

There is a logic in place that if there is no real need for
memory-backend-file, qemuBuildMemoryBackendStr() returns 0.  However
that wasn't the case with hugepage backing.  The reason for that was
that we abused the 'pagesize' variable for storing that information, but
we should rather have a separate one that specifies whether we really
need the new object for hugepage backing.  And that variable should be
set only if this particular NUMA cell needs special treatment WRT
hugepages.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1372153Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1379895

Introduced by commit id '834c5720'.

During the code motion and creation of vsh.c, the function 'vshDeinit()'
in the (new) vsh.c was altered from whence it came in virsh.c such that
calling 'vshReadlineDeinit(ctl)' was conditional on "ctl->imode".

This causes a problem for the interactive running if the "quit" and "exit"
commands are used because 'cmdQuit' will clear ctl->imode, thus when the
interactive loop in main() of virsh.c exits because ctl->mode is clear and
virshDeinit is called which calls vshDeinit, the history file is now not
written. Conversely, if one had exited the interactive loop via pressing
<ctrl>D the file would be created because loop control is broken on EOF
and ctl->imode is not set to false.

This patch will remove the conditional call to vshReadlineDeinit and
restore the former behaviour.

In commit 7f127ded cpuCompareXML was renamed to virCPUCompareXML,
so change the bhyve driver to use the new function and thus
fix the build.

Commit 6c504d6a added a note to the virsh man page about the
deprecation of 'cap' and 'weight' settings for the credit
scheduler. To this day, the default scheduler in Xen is credit
and it supports setting 'cap' and 'weight'. Remove the deprecation
notice from the note on the Xen credit scheduler.
Reported-by: NVolo M. <vm@vovs.net>

Due to a copy and paste error, the scheduler 'cap' parameter
was over-writing the 'weight' parameter when preparing the
return parameters in libxlDomainGetSchedulerParametersFlags.
As a result, the scheduler weight was never shown when getting
schedinfo and setting the weight failed as well

virsh  schedinfo testvm
Scheduler      : credit
cap            : 0

virsh  schedinfo testvm --cap 50 --weight 500
Scheduler      : credit
error: invalid scheduler option: weight

The obvious fix is to assign the 'caps' parameter to the correct
item in the parameter list.
Reported-by: NVolo M. <vm@vovs.net>

Signed-off-by: NJoao Martins <joao.m.martins@oracle.com>
Acked-by: NJim Fehlig <jfehlig@suse.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Add support for formating/parsing libxl channels.

Syntax on xen libxl goes as following:
channel=["connection=pty|socket,path=/path/to/socket,name=XXX",...]
Signed-off-by: NJoao Martins <joao.m.martins@oracle.com>
Acked-by: NJim Fehlig <jfehlig@suse.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

And allow libxl to handle channel element which creates a Xen
console visible to the guest as a low-bandwitdh communication
channel. If type is PTY we also fetch the tty after boot using
libxl_channel_getinfo to fetch the tty path. On socket case,
we autogenerate a path if not specified in the XML. Path autogenerated
is slightly different from qemu driver: qemu stores also on
"channels/target" but it creates then a directory per domain with
each channel target name. libxl doesn't appear to have a clear
definition of private files associated with each domain, so for
simplicity we do it slightly different. On qemu each autogenerated
channel goes like:

channels/target/<domain-name>/<target name>

Whereas for libxl:

channels/target/<domain-name>-<target name>

Should note that if path is not specified it won't persist,
existing only on live XML, unless user had initially specified it.
Since support for libxl channels only came on Xen >= 4.5 we therefore
need to conditionally compile it with LIBXL_HAVE_DEVICE_CHANNEL.

After this patch and having a qemu guest agent:
 $ cat domain.xml | grep -a1 channel | head -n 5 | tail -n 4
 <channel type='unix'>
   <source mode='bind' path='/tmp/channel'/>
   <target type='xen' name='org.qemu.guest_agent.0'/>
 </channel>

 $ virsh create domain.xml
 $ echo '{"execute":"guest-network-get-interfaces"}' | socat
 stdio,ignoreeof  unix-connect:/tmp/channel

 {"execute":"guest-network-get-interfaces"}
 {"return": [{"name": "lo", "ip-addresses": [{"ip-address-type": "ipv4",
 "ip-address": "127.0.0.1", "prefix": 8}, {"ip-address-type": "ipv6",
 "ip-address": "::1", "prefix": 128}], "hardware-address":
 "00:00:00:00:00:00"}, {"name": "eth0", "ip-addresses":
 [{"ip-address-type": "ipv4", "ip-address": "10.100.0.6", "prefix": 24},
 {"ip-address-type": "ipv6", "ip-address": "fe80::216:3eff:fe40:88eb",
 "prefix": 64}], "hardware-address": "00:16:3e:40:88:eb"}, {"name":
 "sit0"}]}
Signed-off-by: NJoao Martins <joao.m.martins@oracle.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

So far only guestfwd and virtio were supported. Add an additional
for Xen as libxl channels create a Xen console visible to the guest.
Signed-off-by: NJoao Martins <joao.m.martins@oracle.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

The qemucapsprobe helper calls virQEMUCapsNewForBinaryInternal with
caps == NULL, causing the following crash:

    Program received signal SIGSEGV, Segmentation fault.
    #0  0x00007ffff788775f in virQEMUCapsInitHostCPUModel
        (qemuCaps=qemuCaps@entry=0x649680, host=host@entry=0x10) at
        src/qemu/qemu_capabilities.c:2969
    #1  0x00007ffff7889dbf in virQEMUCapsNewForBinaryInternal
        (caps=caps@entry=0x0, binary=<optimized out>,
        libDir=libDir@entry=0x4033f6 "/tmp", cacheDir=cacheDir@entry=0x0,
        runUid=runUid@entry=4294967295, runGid=runGid@entry=4294967295,
        qmpOnly=true) at src/qemu/qemu_capabilities.c:4039
    #2  0x0000000000401702 in main (argc=2, argv=0x7fffffffd968) at
        tests/qemucapsprobe.c:73

Caused by v2.2.0-182-g68c70118.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1368417

So far, when it comes to 'virsh update-device --config' of disks
we are limiting ourselves for just the disk source update and
just for CDROMs and floppies. This makes no sense. Especially if
you look around and see that we already allow full update to
graphics and net devices. So let's just take whatever XML user
wants to have there and replace our internal definition with it.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

libxl events are delivered to libvirt via the libxlDomainEventHandler
callback registered with libxl. Documenation in
$xensrc/tools/libxl/libxl_event.h states that the callback "may occur
on any thread in which the application calls libxl". This can result
in deadlock since many of the libvirt callees of libxl hold a lock on
the virDomainObj they are working on. When the callback is invoked, it
attempts to find a virDomainObj corresponding to the domain ID provided
by libxl. Searching the domain obj list results in locking each obj
before checking if it is active, and its ID equals the requested ID.
Deadlock is possible when attempting to lock an obj that is already
locked further up the call stack. Indeed, Max Ustermann reported an
instance of this deadlock

https://www.redhat.com/archives/libvir-list/2015-November/msg00130.html

Guido Rossmueller also recently stumbled across it

https://www.redhat.com/archives/libvir-list/2016-September/msg00287.html

Fix the deadlock by moving the lookup of virDomainObj to the
libxlDomainShutdownThread. After this patch, libxl events are
enqueued on the libvirt side and processed by dedicated thread,
avoiding the described deadlock.
Reported-by: NMax Ustermann <ustermann78@web.de>
Reported-by: NGuido Rossmueller <Guido.Rossmueller@gdata.de>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

enum types are unsigned and the qemuGetCompressionProgram
function can return -1 on error. It is therefore inappropriate
to return an enum type. This fixes a build error where the
internal 'ret' variable was used in a comparison with -1

../../src/qemu/qemu_driver.c: In function 'qemuGetCompressionProgram':
../../src/qemu/qemu_driver.c:3280:5: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits]
../../src/qemu/qemu_driver.c:3289:5: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits]
cc1: all warnings being treated as errors
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>

When creating a copy of virDomainDef we save ourselves the
trouble of writing deep-copy functions and just format and parse
back domain/device XML. However, the XML we are parsing was
already fully formatted - there is no reason to run post parse
callbacks (which fill in blanks - there are none!).
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This is an internal flag that prevents our two entry points to
XML parsing (virDomainDefParse and virDomainDeviceDefParse) from
running post parse callbacks. This is expected to be used in
cases when we already have full domain/device XML and we are just
parsing it back (i.e. virDomainDefCopy or virDomainDeviceDefCopy)
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Just like we did two commits ago, don't try to fetch capabilities
for non-existing binary. Re-use the ones we have for running
domain.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Just like we did two commits ago, don't try to fetch capabilities
for non-existing binary. Re-use the ones we have for running
domain.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>