1. 15 9月, 2009 1 次提交
  2. 14 9月, 2009 1 次提交
    • D
      Fix win32 platform build · 61a70716
      Daniel P. Berrange 提交于
      * configure.in: Only define WITH_SECRETS if libvirtd is present
      * src/Makefile.am: Only build secrets driver if WITH_SECRETS is
        defined. Always add SECRET_DRIVER_SOURCES to EXTRA_DIST
      61a70716
  3. 11 9月, 2009 2 次提交
    • M
      Local file implementation of secret driver API · 03d33860
      Miloslav Trmač 提交于
      This implementation stores the secrets in an unencrypted text file,
      for simplicity in implementation and debugging.
      
      (Symmetric encryption, e.g. using gpgme, will not be difficult to add.
      Because the TLS private key used by libvirtd is stored unencrypted,
      encrypting the secrets file does not currently provide much additional
      security.)
      
      * include/libvirt/virterror.h, src/virterror.c (VIR_ERR_NO_SECRET): New
        error number.
      * po/POTFILES.in, src/Makefile.am: Add secret_driver.
      * bootstrap: Use gnulib's base64 module.
      * src/secret_driver.c, src.secret_driver.h, src/libvirt_private.syms:
        Add local secret driver.
      * qemud/qemud.c (qemudInitialize): Use the local secret driver.
      03d33860
    • M
      Add an internal <secret> XML handling API · b9a8bef4
      Miloslav Trmač 提交于
      Add a <secret> XML handling API, separate from the local driver, to
      avoid manually generating XML in other parts of libvirt.
      
      * src/secret_conf.c, src/secret_conf.h: New files.
      * po/POTFILES.in, src/Makefile.am: Add secret_conf.
      b9a8bef4
  4. 10 9月, 2009 2 次提交
    • D
      Fix use of dlopen modules · fcd4e269
      Daniel P. Berrange 提交于
      Remove the bogus dependancy between node_device.c & storage_backend.c
      by moving the virWaitForDevices into util.h where it can be shared
      safely
      
      * src/storage_backend_disk.c, src/storage_backend_logical.c,
        src/storage_backend_mpath.c, src/storage_backend_scsi.c: Replace
        virStorageBackendWaitForDevices with virFileWaitForDevices
      * src/storage_backend.c, src/storage_backend.h: Remove
        virStorageBackendWaitForDevices, virWaitForDevices
      * src/util.h, src/util.c: Add virFileWaitForDevices
      * configure.in: Move xmlrpc check further down after pkgconfig
        is detected
      * src/Makefile.am: Add missing XMLRPC_CFLAGS/LIBS to opennebula
      * src/libvirt_private.syms: Add many missing exports
      fcd4e269
    • D
      Add helper module for dealing with USB host devices · 1e060bf2
      Daniel P. Berrange 提交于
      * src/Makefile.am: Add usb.h and usb.h to libvirt_util.la
      * src/libvirt_private.syms: Export symbols
      * src/usb.c, src/usb.h: Helper APIs for USB host devices
      1e060bf2
  5. 08 9月, 2009 1 次提交
    • D
      Multipath storage support module · ee8a06f8
      Dave Allan 提交于
      * configure.in src/Makefile.am src/storage_backend.[ch]
        src/storage_conf.[ch] src/storage_backend_mpath.[ch] po/POTFILES.in:
        add a new module for storage multipath, it requires device-mapper
      ee8a06f8
  6. 04 9月, 2009 1 次提交
    • E
      Switch Power Hypervisor to libssh2 · 191053b5
      Eduardo Otubo 提交于
      * configure.in src/Makefile.am: change detection and flags
      * src/phyp/phyp_driver.c src/phyp/phyp_driver.h: connection now
        need to be done as part of the driver code, cleaned up by DV
      191053b5
  7. 02 9月, 2009 1 次提交
    • M
      Add volume encryption information handling. · 05b9b8fd
      Miloslav Trmač 提交于
      Define an <encryption> tag specifying volume encryption format and
      format-depenedent parameters (e.g. passphrase, cipher name, key
      length, key).
      
      Currently the only defined parameter is a reference to a "secret"
      (passphrase/key) managed using the virSecret* API.
      
      Only the qcow/qcow2 encryption format, and a "default" format used to
      let libvirt choose the format during volume creation, is currently
      supported.
      
      This patch does not add any users; the <encryption> tag is added in
      the following patches to both volumes (to support encrypted volume
      creation) and domains.
      
      * docs/*.html: Re-generate
      * docs/formatstorageencryption.html.in, docs/sitemap.html.in:
        Add page describing storage encryption data format
      * docs/schemas/Makefile.am, docs/schemas/storageencryption.rng:
        Add RNG schema for storage encryption format
      * po/POTFILES.in: Add src/storage_encryption_conf.c
      * src/libvirt_private.syms: Export virStorageEncryption* functions
      * src/storage_encryption_conf.h, src/storage_encryption_conf.c: Internal
        helper APIs for dealing with storage encryption format
      * libvirt.spec.in, mingw32-libvirt.spec.in: Add storageencryption.rng
        RNG schema
      05b9b8fd
  8. 25 7月, 2009 1 次提交
    • P
      Add support for VBox 3 and event callbacks on vbox · 41e097e9
      Pritesh Kothari 提交于
      * src/vbox/vbox_driver.c: remove some old 2.5 switches and plug the
        3.0 driver
      * src/vbox/vbox_V3_0.c src/vbox/vbox_CAPI_v3_0.h: the driver for
        VirtualBox 3.0
      * src/vbox/vbox_tmpl.c: handle the new driver and add event support
      * src/Makefile.am: plug in the new module
      41e097e9
  9. 24 7月, 2009 3 次提交
    • E
      First version of the Power Hypervisor driver · a7a82f98
      Eduardo Otubo 提交于
      Features supported:
      - Connects to HMC/VIOS or IVM systems.
      - Life cycle commands (resume and shutdown).
      - dumpxml
      - 'list' and 'list --all'
      
      What is being implemented:
      - better and centralized control for UUID
      - definexml
      - CPU management commands
      
      * src/domain_conf.c src/domain_conf.h: first version of the driver
      * configure.in src/Makefile.am include/libvirt/virterror.h
        src/domain_conf.[ch] src/libvirt.c src/virterror.c: glue the driver
        in the general framework
      a7a82f98
    • M
      First version of the driver for VMWare ESX · e2aeee68
      Matthias Bolte 提交于
      * src/esx/esx_*.[ch]: the driver, uses a remote minimal SOAP client
        to talk to the VI services on ESX nodes.
      * configure.in include/libvirt/virterror.h src/Makefile.am src/driver.h
        src/libvirt.c src/virterror.c: glue in the new driver
      e2aeee68
    • D
      Make QEMU cgroups use configurable · f4c3acdf
      Daniel P. Berrange 提交于
       * qemud/libvirtd_qemu.aug, qemud/test_libvirtd_qemu.aug,
         src/qemu.conf: Add 'cgroups_controllers' and 'cgroups_device_acl'
         parameters
       * src/qemu_conf.h, src/qemu_conf.c: Load & parse configuration params
         for cgroups
       * src/qemu_driver.c: Only use cgroups controllers that are activated,
         and use configured device whitelist instead of default, if set.
      f4c3acdf
  10. 21 7月, 2009 1 次提交
    • L
      Netcf based interface driver implementation · da4f146f
      Laine Stump 提交于
      * src/interface_driver.c src/interface_driver.h: the new driver
      * src/Makefile.am qemud/Makefile.am qemud/qemud.c: hook the new driver
        in the build system and get ti activated by the daemon
      * src/libvirt_private.syms: export needed symbols internally
      da4f146f
  11. 17 7月, 2009 1 次提交
    • D
      Run QEMU guests as an unprivileged user · 0714b2ba
      Daniel P. Berrange 提交于
      * configure.in: Add --with-qemu-user and --with-qemu-group args
      * libvirt.spec.in: use 'qemu' for user/group for Fedora >= 12
      * qemud/libvirtd_qemu.arg, qemud/test_libvirtd_qemu.aug,
        src/qemu.conf: Add 'user' and 'group' args for configuration
      * src/Makefile.am: Create %localstatedir/cache/libvirt/qemu
      * src/qemu_conf.c, src/qemu_conf.h: Load user/group from config
      * src/qemu_driver.c: Change user ID/group ID when launching QEMU
        guests. Change user/group ownership on disks/usb/pci devs.
        Put memory dumps in %localstatedir/cache/libvirt/qemu
      * src/util.c, src/util.h: Add convenient APIs for converting
        username/groupname to user ID / group ID
      0714b2ba
  12. 16 7月, 2009 1 次提交
    • D
      add support for netcf XML import and export · 2f5fb5e0
      Daniel Veillard 提交于
      * src/interface_conf.c src/interface_conf.h: the import and export
        routines and the internal APIs
      * src/Makefile.am: hook the new file in the makefiles
      * src/libvirt_private.syms: export a few private symbols internally
      * po/POTFILES.in: the new file contains translatable strings
      2f5fb5e0
  13. 30 6月, 2009 1 次提交
  14. 26 6月, 2009 1 次提交
    • D
      big cleanup of the debug configuration option · 173c230e
      Daniel Veillard 提交于
      * src/Makefile.am src/libvirt.c src/libvirt_private.syms src/logging.c
        src/logging.h src/util.c src/libvirt_debug.syms: big cleanup of
        the debug configuration option and code by Amy Griffis
      daniel
      173c230e
  15. 25 6月, 2009 1 次提交
    • D
      Finish the integration of OpenNebula driver · b5472015
      Daniel Veillard 提交于
      * configure.in libvirt.spec.in src/Makefile.am
        src/opennebula/one_client.[ch] src/opennebula/one_conf.h
        src/opennebula/one_driver.[ch] : Finish the integration of OpenNebula,
        avoid dependancy on OpenNebula libraries, require xmlrpc-c-devel
        and build it by default, based on patch by Javier Fontan and DanB
        suggestions
      Daniel
      b5472015
  16. 15 6月, 2009 1 次提交
  17. 02 6月, 2009 1 次提交
    • D
      NPIV implementation for node device create and destroy · 81d0ffbc
      Daniel Veillard 提交于
      * src/Makefile.am src/node_device.[ch] src/node_device_conf.[ch]
        src/node_device_hal.[ch] src/node_device_hal_linux.c
        src/qemu_driver.c src/remote_internal.c src/storage_backend.c
        src/virsh.c src/xen_unified.c tests/nodedevxml2xmltest.c
        po/POTFILES.in: implementation for node device create and destroy
        in NPIV support, patch by David Allan
      Daniel
      81d0ffbc
  18. 25 5月, 2009 1 次提交
    • D
      Include the OpenNebula driver · b811851b
      Daniel Veillard 提交于
      * src/opennebula/one_conf.[ch] src/opennebula/one_driver.[ch]:
        the OpenNebula driver
      * configure.in include/libvirt/virterror.h qemud/Makefile.am
        qemud/qemud.c src/Makefile.am src/domain_conf.[ch] src/driver.h
        src/libvirt.c src/virterror.c: integration of the OpenNebula
        driver in the libvirt infrastructure
      * AUTHORS: add Abel Miguez Rodriguez
      daniel
      b811851b
  19. 20 5月, 2009 1 次提交
    • D
      Add the Interface config APIs · 73bc0114
      Daniel Veillard 提交于
      * configure.in include/libvirt/libvirt.h[.in]
        include/libvirt/virterror.h qemud/remote.c
        qemud/remote_dispatch_args.h qemud/remote_dispatch_prototypes.h
        qemud/remote_dispatch_ret.h qemud/remote_dispatch_table.h
        qemud/remote_protocol.[chx] src/Makefile.am src/datatypes.c
        src/datatypes.h src/driver.h src/libvirt.c src/remote_internal.c
        src/virterror.c src/libvirt_private.syms src/libvirt_public.syms:
        Add the Interface config APIs and remote stubs for those, patch
        by Laine Stump
      * AUTHORS: add Laine
      daniel
      73bc0114
  20. 19 5月, 2009 1 次提交
  21. 20 4月, 2009 1 次提交
  22. 19 4月, 2009 1 次提交
  23. 18 4月, 2009 1 次提交
    • D
      integration of the VirtualBox support · 10d16508
      Daniel Veillard 提交于
      * configure.in include/libvirt/virterror.h src/Makefile.am
        src/domain_conf.[ch] src/driver.h src/virterror.c src/vbox/README
        src/vbox/vbox_CAPI_v2_2.h src/vbox/vbox_V2_2.c
        src/vbox/vbox_XPCOMCGlue.[ch] src/vbox/vbox_driver.[ch]
        src/vbox/vbox_tmpl.c: integration of the VirtualBox support
        patches by Pritesh Kothari
      Daniel
      10d16508
  24. 03 4月, 2009 1 次提交
  25. 02 4月, 2009 1 次提交
  26. 03 3月, 2009 3 次提交
  27. 17 2月, 2009 1 次提交
  28. 21 1月, 2009 1 次提交
  29. 16 1月, 2009 1 次提交
  30. 06 1月, 2009 2 次提交
  31. 05 1月, 2009 3 次提交
    • J
      migrate linux-specific symbol names into their own sym file · b0119de8
      Jim Meyering 提交于
      * configure.in (WITH_LINUX): New automake conditional.
      * src/Makefile.am (PRIVSYMFILES) [WITH_LINUX]: Append libvirt_linux.syms.
      * src/libvirt_private.syms: Move two symbol names into...
      * src/libvirt_linux.syms: ...this new file.
      Author: John Levon
      b0119de8
    • J
      Move bridge symbols into a separate syms file · 83dfc25c
      Jim Meyering 提交于
      * configure.in: Provide a new --with-bridge option.
      * src/Makefile.am (PRIVSYMFILES) [WITH_BRIDGE]: Append libvirt_bridge.syms.
      * src/bridge.c: Test WITH_BRIDGE rather than particular drivers.
      * src/libvirt_private.syms: Move bridge-related symbols into...
      * src/libvirt_bridge.syms: ...this new file.
      Author: John Levon
      83dfc25c
    • J
      Move --with-driver-modules symbols into a separate sym file · ea5775bf
      Jim Meyering 提交于
      * src/Makefile.am (PRIVSYMFILES): Append libvirt_driver_modules.syms.
      * src/libvirt_private.syms: Move virDriverLoadModule into...
      * src/libvirt_driver_modules.syms: ... this new file.
      Author: John Levon
      ea5775bf