- 05 3月, 2020 2 次提交
-
-
由 Gaurav Agrawal 提交于
Signed-off-by: NGaurav Agrawal <agrawalgaurav@gnome.org> [removed dead assignment] Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Ján Tomko 提交于
We recognize three return values from tests: * OK -> 0 * SKIP -> EXIT_AM_SKIP * ERROR -> anything else Also check for EXIT_AM_SKIP when building a bitmap of failed tests, otherwise the skipped tests would be printed in the suggested range of tests that shoud be re-run. Reported-by: NPeter Krempa <pkrempa@redhat.com> Signed-off-by: NJán Tomko <jtomko@redhat.com> Fixes: cebb468eReviewed-by: NPeter Krempa <pkrempa@redhat.com>
-
- 04 3月, 2020 29 次提交
-
-
由 Peter Krempa 提交于
Use the 'flat' flag for 'query-named-block-nodes' if qemu supports QEMU_CAPS_QMP_QUERY_NAMED_BLOCK_NODES_FLAT in qemuBlockGetNamedNodeData. We don't need the data so plumb in whether qemu supports the 'flat' output. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Peter Krempa 提交于
Modern qemu allows to skip the nested redundant data in the output of query-named-block-nodes. Plumb in the support for the argument that enables it. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Peter Krempa 提交于
Replace qemuMonitorBlockGetNamedNodeData by qemuBlockGetNamedNodeData. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Peter Krempa 提交于
Use g_autoptr to get rid of the cleanup section. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Peter Krempa 提交于
Detect the presence of the flag and make it available internally as QEMU_CAPS_QMP_QUERY_NAMED_BLOCK_NODES_FLAT. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Peter Krempa 提交于
The monitor password callback was removed long time ago but the callback type and variable were left around. Finish the cleanup. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Peter Krempa 提交于
Update to v4.2.0-1858-gdb736e0437 which contains my commit for 'flat' output of 'query-named-block-nodes'. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Ján Tomko 提交于
Other buses are not supported. Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
-
由 Ján Tomko 提交于
Other buses are not supported. Signed-off-by: NJán Tomko <jtomko@redhat.com> https://bugzilla.redhat.com/show_bug.cgi?id=1724928Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
-
由 Ján Tomko 提交于
Format the 'vhost-user-fs' device on the QEMU command line. This device provides shared file system access using the FUSE protocol carried over virtio. The actual file server is implemented in an external vhost-user-fs device backend process. https://bugzilla.redhat.com/show_bug.cgi?id=1694166Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com> Reviewed-by: NPeter Krempa <pkrempa@redhat.com> Tested-by: NAndrea Bolognani <abologna@redhat.com>
-
由 Ján Tomko 提交于
Look into /usr/share/qemu/vhost-user to see whether we can find a suitable virtiofsd binary, in case the user did not provide one in the domain XML. Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com> Reviewed-by: NPeter Krempa <pkrempa@redhat.com> Tested-by: NAndrea Bolognani <abologna@redhat.com>
-
由 Ján Tomko 提交于
Wire up the code to put virtiofsd in the emulator cgroup on domain startup. Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NPeter Krempa <pkrempa@redhat.com> Tested-by: NAndrea Bolognani <abologna@redhat.com>
-
由 Ján Tomko 提交于
Start virtiofsd for each <filesystem> device using it. Pre-create the socket for communication with QEMU and pass it to virtiofsd. Note that virtiofsd needs to run as root. https://bugzilla.redhat.com/show_bug.cgi?id=1694166 Introduced by QEMU commit a43efa34c7d7b628cbf1ec0fe60043e5c91043ea Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NPeter Krempa <pkrempa@redhat.com> Tested-by: NAndrea Bolognani <abologna@redhat.com>
-
由 Ján Tomko 提交于
This is not yet supported. Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com> Reviewed-by: NPeter Krempa <pkrempa@redhat.com> Tested-by: NAndrea Bolognani <abologna@redhat.com>
-
由 Ján Tomko 提交于
Reject unsupported configurations. Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NPeter Krempa <pkrempa@redhat.com> Tested-by: NAndrea Bolognani <abologna@redhat.com> Reviewed-by: NMasayoshi Mizuma <m.mizuma@jp.fujitsu.com>
-
由 Ján Tomko 提交于
Add a 'virtiofsd_debug' option for tuning whether to run virtiofsd in debug mode. Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com> Reviewed-by: NPeter Krempa <pkrempa@redhat.com> Tested-by: NAndrea Bolognani <abologna@redhat.com>
-
由 Ján Tomko 提交于
Add more elements for tuning the virtiofsd daemon and the vhost-user-fs device: <driver type='virtiofs' queue='1024' xattr='on'> <binary path='/usr/libexec/virtiofsd'> <cache mode='always'/> <lock posix='off' flock='off'/> </binary> </driver> Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com> Reviewed-by: NMasayoshi Mizuma <m.mizuma@jp.fujitsu.com> Reviewed-by: NPeter Krempa <pkrempa@redhat.com> Tested-by: NAndrea Bolognani <abologna@redhat.com>
-
由 Ján Tomko 提交于
Introduce a new 'virtiofs' driver type for filesystem. <filesystem type='mount' accessmode='passthrough'> <driver type='virtiofs'/> <source dir='/path'/> <target dir='mount_tag'> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </filesystem> Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com> Reviewed-by: NPeter Krempa <pkrempa@redhat.com> Tested-by: NAndrea Bolognani <abologna@redhat.com>
-
由 Ján Tomko 提交于
Add a document describing the usage of virtiofs. Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NPeter Krempa <pkrempa@redhat.com> Tested-by: NAndrea Bolognani <abologna@redhat.com>
-
由 Ján Tomko 提交于
Introduced by QEMU commit 98fc1ada4cf70af0f1df1a2d7183cf786fc7da05 virtio: add vhost-user-fs base device Released in QEMU v4.2.0. Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NPeter Krempa <pkrempa@redhat.com> Acked-by: NStefan Hajnoczi <stefanha@redhat.com> Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com> Tested-by: NAndrea Bolognani <abologna@redhat.com>
-
由 Ján Tomko 提交于
Some validation check might reject unprivileged drivers in the future. Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NPeter Krempa <pkrempa@redhat.com> Tested-by: NAndrea Bolognani <abologna@redhat.com>
-
由 Ján Tomko 提交于
Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NPeter Krempa <pkrempa@redhat.com> Tested-by: NAndrea Bolognani <abologna@redhat.com>
-
由 Ján Tomko 提交于
Pass logManager to qemuExtDevicesStart for future usage. Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com> Tested-by: NAndrea Bolognani <abologna@redhat.com>
-
由 Ján Tomko 提交于
Allow adding new groups without changing indentation. Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NPeter Krempa <pkrempa@redhat.com> Acked-by: NStefan Hajnoczi <stefanha@redhat.com> Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com> Tested-by: NAndrea Bolognani <abologna@redhat.com>
-
由 Andrea Bolognani 提交于
A few new companies have contributed to libvirt since the last time the gitdm configuration was updated. Signed-off-by: NAndrea Bolognani <abologna@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Andrea Bolognani 提交于
Fixes: 3a3a85c5Signed-off-by: NAndrea Bolognani <abologna@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Andrea Bolognani 提交于
We already have one instance of it being used in our git history, and more are probably bound to show up eventually. Signed-off-by: NAndrea Bolognani <abologna@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Andrea Bolognani 提交于
As of libvirt-jenkins-ci commit e41e341f0d8f, we no longer bake this environment variable into our container images. Signed-off-by: NAndrea Bolognani <abologna@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Michal Privoznik 提交于
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 03 3月, 2020 1 次提交
-
-
由 Daniel Veillard 提交于
* docs/news.xml: updated for the release Signed-off-by: NDaniel Veillard <veillard@redhat.com>
-
- 29 2月, 2020 1 次提交
-
-
由 Andrea Bolognani 提交于
Signed-off-by: NAndrea Bolognani <abologna@redhat.com> Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
- 27 2月, 2020 5 次提交
-
-
由 Peter Krempa 提交于
Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Peter Krempa 提交于
We document steps how to fix images if they are rejected for missing the 'backing file format' field. Document also how to securely probe the image format if it's unknown. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Pavel Hrdina 提交于
The default memlock limit is 64k which is not enough to start a single VM. The requirements for one VM are 12k, 8k for eBPF map and 4k for eBPF program, however, it fails to create eBPF map and program with 64k limit. By testing I figured out that the minimal limit is 80k to start a single VM with functional eBPF and if I add 12k I can start another one. This leads into following calculation: 80k as memlock limit worked to start a VM with eBPF which means there is 68k of lock memory that I was not able to figure out what was using it. So to get a number for 4096 VMs: 68 + 12 * 4096 = 49220 If we round it up we will get 64M of memory lock limit to support 4096 VMs with default map size which can hold 64 entries for devices. This should be good enough as a sane default and users can change it if the need to. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1807090Signed-off-by: NPavel Hrdina <phrdina@redhat.com> Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Laine Stump 提交于
Signed-off-by: NLaine Stump <laine@redhat.com> Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Daniel P. Berrangé 提交于
We now support setting bandwidth on networks with type bridge. Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>
-
- 26 2月, 2020 2 次提交
-
-
由 Jiri Denemark 提交于
Whenever there is a guest CPU configured in domain XML, we will call some CPU driver APIs to validate the CPU definition and check its compatibility with the hypervisor. Thus domains with guest CPU specification can only be started if the guest architecture is supported by the CPU driver. But we would add a default CPU to any domain as long as QEMU reports it causing failures to start any domain on affected architectures. https://bugzilla.redhat.com/show_bug.cgi?id=1805755Signed-off-by: NJiri Denemark <jdenemar@redhat.com> Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
-
由 Peter Krempa 提交于
Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
-