Incoming migration may require quite a few parameters (URI, fd, path) to
be considered while starting QEMU and we will soon add another one.
Let's group all of them in a single struct.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Make callers of qemuBuildCommandLine responsible for providing the URI
which should be passed as a parameter for -incoming.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Move the code from qemuBuildCommandLine into dedicated functions.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Move the code from qemuMigrationFinish into a dedicated function.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Introduce a new helper function "virDiskNameParse" which extends
virDiskNameToIndex but handling both disk index and partition index.
Also rework virDiskNameToIndex to be based on virDiskNameParse.
A test is also added for this function testing both valid and
invalid disk names.
Signed-off-by: NJoao Martins <joao.m.martins@oracle.com>

Introduce support for domainMemoryStats API call, which
consequently enables the use of `virsh dommemstat` command to
query for memory statistics of a domain. We support
the following statistics: balloon info, available and currently
in use. swap-in, swap-out, major-faults, minor-faults require
cooperation of the guest and thus currently not supported.

We build on the data returned from libxl_domain_info and deliver
it in the virDomainMemoryStat format.
Signed-off-by: NJoao Martins <joao.m.martins@oracle.com>

The LXC driver uses virSetUIDGID() to become UID/GID 0.
It passes an empty groups list to virSetUIDGID()
to get rid of all supplementary groups from the host side.
But virSetUIDGID() calls setgroups() only if the supplied list
is larger than 0.
This leads to a container root with unrelated supplementary groups.
In most cases this issue is unoticed as libvirtd runs as UID/GID 0
without any supplementary groups.
Signed-off-by: NRichard Weinberger <richard@nod.at>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Instead of creating symlinks, bind mount the devices to
/dev/pts/XY.
Using bind mounts it is no longer needed to add pts devices
to files like /etc/securetty.
Signed-off-by: NRichard Weinberger <richard@nod.at>

Userspace does not expect that the initial console
is a controlling TTY. systemd can deal with that, others not.
On sysv init distros getty will fail to spawn a controlling on
/dev/console or /dev/tty1. Which will cause to whole container
to reboot upon ctrl-c.

This patch changes the behavior of libvirt to match the kernel
behavior where the initial TTY is also not controlling.

The only user visible change should be that a container with
bash as PID 1 would complain. But this matches exactly the kernel
be behavior with init=/bin/bash.
To get a controlling TTY for bash just run "setsid /bin/bash".
Signed-off-by: NRichard Weinberger <richard@nod.at>

https://bugzilla.redhat.com/show_bug.cgi?id=1251190

So, if domain loses access to storage, sanlock tries to kill it
after some timeout. So far, the default is 80 seconds. But for
some scenarios this might not be enough. We should allow users to
adjust the timeout according to their needs.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

ppc64 guests don't require adding a NUMA node for hotplug memory to
work. Lift the requirement and add test cases.

Prepare the command line generator for the possibility that in some
configurations the target NUMA node info will be missing.

Adjust the config code so that it does not enforce that target memory
node is specified. To avoid breakage, adjust the qemu memory hotplug
config checker to disallow such config for now.

Aggregate the checks of the dimm device into the verification function
rather than having them in the formatter.

Add a function that will aggregate various checks related to memory
hotplug so that they aren't scattered accross various parts of the
code.

Since we already make sure before that the domain configuration is
valid we may execute it always at the cost of doing 0 iterations of the
for loop.

This patch will simplify later refactor as it will avoid whitespace
changes.

Make the function usable so that -1 can be passed to it as cell ID so
that we can later enable memory hotplug on non-NUMA guests for certain
architectures.

Since we can't know at service start how many VMs will be running we
can't calculate an apropriate shutdown timeout. So instead of killing
off the service just let it use it's own internal timeout mechanism.

References:
    http://bugs.debian.org/803714
    https://bugzilla.redhat.com/show_bug.cgi?id=1195544

This patch addresses BZ 1244895.

Adapt the sysfs TPM command cancel path for the TPM driver that
does not use a miscdevice anymore since Linux 4.0. Support old
and new paths and check their availability.

Add a mockup for the test cases to avoid the testing for
availability of the cancel path.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

Introduce support for domainGetCPUStats API call and consequently
allow us to use `virsh cpu-stats`. The latter returns a more brief
output than the one provided by`virsh vcpuinfo`.
Signed-off-by: NJoao Martins <joao.m.martins@oracle.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Current monitor code overrides domain object's privateData, e.g.
in virBhyveProcessStart():

  vm->privateData = bhyveMonitorOpen(vm, driver);

where bhyveMonitorPtr() returns bhyveMonitorPtr.

This is not right thing to do, so make bhyveMonitorPtr
a part of the bhyveDomainObjPrivate struct and change related code
accordingly.

This guards against code such as

 cleanup :

which is happily accepted by the compiler but does not conform
to our style guidelines.

Use toadd->use directly.
Signed-off-by: NChen Hanxiao <chenhanxiao@gmail.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1277781

The virStoragePoolFCRefreshThread had passed a pointer to the pool obj
in the virStoragePoolFCRefreshInfoPtr; however, we cannot assume that
the pool exists still since we don't keep the pool lock throughout
the duration of the thread.

Therefore, instead of passing the pool obj pointer, pass the UUID of
the pool and perform a lookup.  If found, then we can perform the
refresh using the locked pool obj pointer; otherwise, we just exit
the thread since the pool is now gone.

Add a new API to search the currently defined pool list for a pool with
a matching UUID and return the locked pool object pointer.

Change the field name from 'name' to 'fchost_name' to better id it.

Since we treat it like a boolean, let's store it that way. At least one
path had already treated as true/false anyway.

Based on Alex's explanation [1] in the recent discussion let's update
the comment explaining the memory lock limit calculation.

[1]
http://www.redhat.com/archives/libvir-list/2015-November/msg00329.html

Break early when hard limit is set so that it's not intermixed by other
logic for determining the limit.

Logging current async job while in BeginJob is useful, but the async job
we want to start is even more interesting.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

It's just a copy&paste of qemuxml2argv test anyway. We can test most of
them (except for qemuxmlns-qemu-ns-domain.xml which fails to validate
against our schema) by qemuxml2argv test.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Fixes several style issues and removes "DEF" (what is it supposed to
mean anyway?) from debug messages.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

USB controllers can share the same 'index' which indicates, that there
is some sort of master-companion relationship.  Reorder the controllers
in XML in to place the master controller before its companions.  This is
required by QEMU to not fail with error message:

error: internal error: process exited while connecting to monitor:
2015-10-26T16:25:17.630265Z qemu-system-x86_64:
-device ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pci.0,multifunction=on,addr=0x6:
USB bus 'usb.0' not found

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1166452Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Adding this feature will allow users to easily attach a hostdev network
interface using PCI passthrough.

The interface can be attached using --type=hostdev and PCI address or
as --source.  This command also allows you to tell, whether the interface
should be managed.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=997561Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Rewrite the attach-interface section in man page to be more readable and
extendable.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>