- 18 8月, 2015 2 次提交
-
-
由 Luyao Huang 提交于
This function will change the guest name, we shouldn't allow the readonly user do this. Signed-off-by: NLuyao Huang <lhuang@redhat.com>
-
由 Luyao Huang 提交于
Signed-off-by: NLuyao Huang <lhuang@redhat.com>
-
- 16 8月, 2015 1 次提交
-
-
由 John Ferlan 提交于
Coverity complained that 'vm' wasn't initialized before jumping to cleanup: and calling virDomainObjEndAPI if the VIR_STRDUP fails. So I initialized vm = NULL and also moved the VIR_STRDUP closer to usage and used endjob for goto. Lots of other reasons for failures.
-
- 15 8月, 2015 2 次提交
-
-
由 Martin Kletzander 提交于
That causes shadowing errors on older compilers. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Moshe Levi 提交于
This patch removes the static keyword from the vshReadline which was introduced in commit 834c5720. With readline the vshReadline function is not static but when compiling without readline it was defined as static which caused compilation error.
-
- 14 8月, 2015 8 次提交
-
-
由 Erik Skultety 提交于
In order to share as much virsh' logic as possible with upcomming virt-admin client we need to split virsh logic into virsh specific and client generic features. Since majority of virsh methods should be generic enough to be used by other clients, it's much easier to rename virsh specific data to virshX than doing this vice versa. It moved generic virsh commands (including info and opts structures) to generic module vsh.c. Besides renaming methods and structures, this patch also involves introduction of a client specific control structure being referenced as private data in the original control structure, introduction of a new global vsh Initializer, which currently doesn't do much, but there is a potential for added functionality in the future. Lastly it introduced client hooks which are especially necessary during client connecting phase.
-
由 Tomas Meszaros 提交于
Currently supports only renaming inactive domains without snapshots. Signed-off-by: NTomas Meszaros <exo@tty.sk> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Tomas Meszaros 提交于
This should be emitted whenever a domain is renamed. Signed-off-by: NTomas Meszaros <exo@tty.sk>
-
由 Tomas Meszaros 提交于
We just need to update the entry in the second hash table. Since commit 8728a565 we have two hash tables for the domain list so that we can do O(1) lookup regardless of looking up by UUID or name. Since with renaming a domain UUID does not change, we only need to update the second hash table, where domains are referenced by their name. We will call both functions from the qemuDomainRename(). Signed-off-by: NTomas Meszaros <exo@tty.sk>
-
由 Tomas Meszaros 提交于
This patch implements new virsh command, domrename. Using domrename, it will be possible to rename domain from the virsh shell by calling virRenameDomain API. It takes two arguments, current domain name and new domain name. Example: virsh # list --all Id Name State ---------------------------------------------------- - bar shut off virsh # domrename bar foo Domain successfully renamed virsh # list --all Id Name State ---------------------------------------------------- - foo shut off virsh # Signed-off-by: NTomas Meszaros <exo@tty.sk>
-
由 Tomas Meszaros 提交于
Also, among with this new API new ACL that restricts rename capability is invented too. Signed-off-by: NTomas Meszaros <exo@tty.sk> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Guido Günther 提交于
RedHat and Debian based distros use different locations Reference: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=790935
-
由 Guido Günther 提交于
Otherwise the error is just error: Failed to create domain from test1.xml error: failed to retrieve file descriptor for interface: Transport endpoint is not connected since we don't get a sensible error after the fork.
-
- 13 8月, 2015 9 次提交
-
-
由 John Ferlan 提交于
Since it's not used, let's remove it to avoid any future usage. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Martin Kletzander 提交于
Pinning information returned for emulatorpin and vcpupin calls is being returned from our data without querying cgroups for some time. However, not all the data were utilized. When automatic placement is used the information is not returned for the calls mentioned above. Since the numad hint in private data is properly saved/restored, we can safely use it to return true information. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1162947Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
The numad hint stored in priv->autoNodeset is information that gets lost during daemon restart. And because we would like to use that information in the future, we also need to save it in the status XML. For the sake of tests, we need to initialize nnumaCell_max to some value, so that the restoration doesn't fail in our test suite. There is no need to fill in the actual numa cell data since the recalculating function virCapabilitiesGetCpusForNodemask() will not fail, it will just skip filling the data in the bitmap which we don't use in tests anyway. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
This needs a reorder of XML option definitions. It might come in handy one day. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
When parsing private domain data, there are two paths that are flawed. They are both error paths, just from different parts of the function. One of them can call free() on an uninitialized pointer. Initialization to NULL is enough here. The other one is a bit trickier to explain, but as easy as the first one to fix. We create capabilities, parse them and then assign them into the private data pointer inside the domain object. If, however, we get to fail from now on, the error path calls unrefs the capabilities and then, when the domain object is being cleaned, qemuDomainObjPrivateFree() tries to unref them as well. That causes a segfault. Settin the pointer to NULL upon successful addition to the private data is enough. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 John Ferlan 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1210587 (completed) When generating the default drive address for a SCSI <disk> device, check the generated address to ensure it doesn't conflict with a SCSI <hostdev> address. The <disk> address generation algorithm uses the <target> "dev" name in order to determine which controller and unit in order to place the device. Since a SCSI <hostdev> device doesn't require a target device name, its placement on the guest SCSI address "could" conflict. For instance, if a SCSI <hostdev> exists at controller=0 unit=0 and an attempt to hotplug 'sda' into the guest made, there would be a conflict if the <hostdev> is already using /dev/sda.
-
由 John Ferlan 提交于
Create local controller/bus variables to be used by a future patch
-
由 John Ferlan 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1210587 (partial) If a SCSI subsystem <hostdev> element address is provided, we need to make sure the address provided doesn't conflict with an existing or libvirt generated address for a SCSI <disk> element. We can handle this condition in device post processing since we're not generating an address based on some target name - rather it's either generated based on space or provided from the user. If the user provides one that conflicts, then we need to disallow the change. This will fix the issue where the domain XML provided an <address> for the <hostdev>, but not the <disk> element where the address provided ends up being the same address used for the <disk>. A <disk> address is generated using it's assigned <target> 'dev' name prior to the check/validation of the <hostdev> address value.
-
由 Frank Schreuder 提交于
Hot-unplugging a disk from a guest that supports hot-unplugging generates an error in the libvirt log when running QEMU with the "-msg timestamp=on" flag. 2015-08-06 10:48:59.945+0000: 11662: error : qemuMonitorTextDriveDel:2594 : operation failed: deleting drive-virtio-disk4 drive failed: 2015-08-06T10:48:59.945058Z Device 'drive-virtio-disk4' not found This error is caused because the HMP results are getting prefixed with a timestamp. Parsing the output is not reliable with STRPREFIX as the results can be prefixed with a timestamp. Using strstr ensures that parsing the output works whether the results are prefixed or not. Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: NFrank Schreuder <fschreuder@transip.nl>
-
- 12 8月, 2015 10 次提交
-
-
由 Laine Stump 提交于
This reverts commit ede34470, which was apparently written based on testing performed before commits 1e15be1b and 9a12b6 were pushed upstream. Once those two patches are in place, commit ede34470 is redundant, and can even cause incorrect/unexpected behavior when auto-assigning addresses for virtio-net devices.
-
由 Michal Privoznik 提交于
In my previous commit d7f5c889 I tried to introduce support for inbound.floor. But the code change was incomplete. This is the change needed to fully enable the feature. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
There's a check right at the beginning of the function that shortcuts if the function was called over all NULL arguments. However, this was meant just as a fool-proof check so that we don't crash if function is used in a bad manner. Anyway, it makes Coverity unhappy as it then thinks any of the arguments could be NULL. Well, with the current state of the code it can't. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
It may happen that an interface don't have any bandwidth set and a new one is to be set. In that case, @ifaceBand will be NULL. This will cause troubles later in the code when deciding what to do. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Peter Krempa 提交于
Commit 6983d6d2 tried to improve parseRateStr but broke the build instead for compilers that were not able to properly introspect the for loop indexed by the enum resulting into the following error: virsh-domain.c: In function 'parseRateStr': virsh-domain.c:916:13: error: 'field_name' may be used uninitialized in this function [-Werror=maybe-uninitialized] vshError(ctl, _("malformed %s field"), field_name); ^ virsh-domain.c:915:13: error: 'tmp' may be used uninitialized in this function [-Werror=maybe-uninitialized] if (virStrToLong_ullp(token, NULL, 10, tmp) < 0) { ^ Rather than trying to fix the code, refactor the function again by reusing virStringSplit.
-
由 Cole Robinson 提交于
If you pass <disk><serial> XML to UpdateDevice, and the original device didn't have a <serial> block, libvirtd crashes trying to read the original NULL serial string. Use _NULLABLE string comparisons to avoid the crash. A couple other properties needed the change too.
-
由 Laine Stump 提交于
Commit e8d55172 updated the domain post-parse to automatically add pcie-root et al for certain ARM "virt" machinetypes, but didn't update the function qemuDomainSupportsPCI() which is called later on when we are auto-assigning PCI addresses and default settings for the PCI controller <model> and <target> attributes. The result was that PCI addresses weren't assigned, and the controllers didn't have their attribute default values set, leading to an error when the domain was started, e.g.: internal error: autogenerated dmi-to-pci-bridge options not set This patch adds the same check made in the earlier patch to qemuDomainSupportsPCI(), so that PCI address auto-assignment and target/model default values will be set.
-
由 Guido Günther 提交于
When running the test suite using "unshare -n" we might have IPv6 but no configured addresses. Due to AI_ADDRCONFIG getaddrinfo then fails with EAI_NONAME which we should then treat as IPv6 unavailable.
-
由 Laine Stump 提交于
This fixes the crash described here: https://www.redhat.com/archives/libvir-list/2015-August/msg00162.html In short, we were calling ioctl(SIOCETHTOOL) pointing to a too-short object that was a local on the stack, resulting in the memory past the end of the object being overwritten. This was because the struct used by the ETHTOOL_GFEATURES command of SIOCETHTOOL ends with a 0-length array, but we were telling ethtool that it could use 2 elements on the array. The fix is to allocate the necessary memory with VIR_ALLOC_VAR(), including the extra length needed for a 2 element array at the end.
-
由 Andrea Bolognani 提交于
Commit adb865df introduced some changes in ppc64DriverNodeData() that cause libvirtd to crash on startup unless this patch is applied as well.
-
- 11 8月, 2015 8 次提交
-
-
由 Michal Privoznik 提交于
Well, there are just two places that needs adjustment: qemuDomainGetInterfaceParameters - to report the @floor qemuDomainSetInterfaceParameters - now that the function has been fixed, we can allow updating @floor too. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
We have a function parseRateStr() that parses --inbound and --outbound arguments to both attach-interface and domiftune. Now that we have all virTypedParams macros needed for QoS, lets parse even floor attribute. The extended format for the arguments looks like this then: --inbound average[,peak[,burst[,floor]]] Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
This macro represents the single missing field we don't expose yet within QoS: inbound.floor. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
The function is used to parse a tuple delimited by commas into virNetDevBandwidth structure. So far only three out of fore fields are supported: average, peak and burst. The single missing field is floor. Well, the parsing works, but I think we can do better. Especially when we will need to parse floor too in very close future. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
As sketched in previous commits, imagine the following scenario: virsh # domiftune gentoo vnet0 inbound.average: 100 inbound.peak : 0 inbound.burst : 0 outbound.average: 100 outbound.peak : 0 outbound.burst : 0 virsh # domiftune gentoo vnet0 --inbound 0 virsh # shutdown gentoo Domain gentoo is being shutdown virsh # list --all error: Failed to list domains error: Cannot recv data: Connection reset by peer Program received signal SIGSEGV, Segmentation fault. 0x00007fffe80ea221 in networkUnplugBandwidth (net=0x7fff9400c1a0, iface=0x7fff940ea3e0) at network/bridge_driver.c:4881 4881 net->floor_sum -= ifaceBand->in->floor; This is rather unfortunate. We should not SIGSEGV here. The problem is, that while in the second step the inbound QoS was cleared out, the network part of it was not updated (moreover, we don't report that vnet0 had inbound.floor set). Internal structure therefore still had some fragments left (e.g. class_id). So when qemuProcessStop() started to clean up the environment it got to networkUnplugBandwidth(). Here, class_id is set therefore function assumes that there is an inbound QoS. This actually is a fair assumption to make, there's no need for a special QoS box in network's QoS when there's no QoS to set. Anyway, the problem is not the networkUnplugBandwidth() rather than qemuDomainSetInterfaceParameters() which completely forgot about QoS being disperse (some parts are set directly on interface itself, some on bridge the interface is plugged into). Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
So, if a domain vNIC's bandwidth has been successfully set, it's possible that because @floor is set on network's bridge, this part may need updating too. And that's exactly what this function does. While the previous commit introduced a function to check if @floor can be satisfied, this does all the hard work. In general, there may be three, well four possibilities: 1) No change in @floor value (either it remain unset, or its value hasn't changed) 2) The @floor value has changed from a non-zero to a non-zero value 3) New @floor is to be set 4) Old @floor must be cleared out The difference between 2), 3) and 4) is, that while in 2) the QoS tree on the network's bridge already has a special class for the vNIC, in 3) the class must be created from scratch. In 4) it must be removed. Fortunately, we have helpers for all three interesting cases. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
When a domain vNIC's bandwidth is to be changed (at runtime) it is possible that guaranteed minimal bandwidth (@floor) will change too. Well, so far it is, because we still don't have an implementation that allows setting it dynamically, so it's effectively erased on: #virsh domiftune $dom vnet0 --inbound 0 However, that's slightly unfortunate. We do some checks on domain startup to see if @floor can be guaranteed. We ought do the same if QoS is changed at runtime. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
This is no functional change. It's just that later in the series we will need to pass class_id as an integer. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-