- 15 6月, 2016 1 次提交
-
-
由 Chunyan Liu 提交于
Support creating guest with USB host device in config file. Currently libxl only supports xen PV guest, and only supports specifying USB host device by 'bus number' and 'device number', for example: <hostdev mode='subsystem' type='usb' managed='no'> <source> <address bus='1' device='3'/> </source> </hostdev> Signed-off-by: NChunyan Liu <cyliu@suse.com> Signed-off-by: NJim Fehlig <jfehlig@suse.com>
-
- 14 6月, 2016 20 次提交
-
-
由 John Ferlan 提交于
Refactor the error paths for attaching char device (it's about to be more complicated). Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Add a slight clarification to usage of "telnet", "telnets", or "tls" as the protocol type value. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Add the capability flag and checks for the qemu object 'tls-creds-x509' Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Commit id '42ff399a' broke syntax-check by not encasing <dt> elements in <code>xxx</code>
-
由 Martin Kletzander 提交于
I screwed up by accidentally pushing incomplete version of the renumbering commit. This patch just fixes the rest so the tree matches changes in v2. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
Version was bumped but documentation (and comments) didn't follow the numbering. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
If the domain is not running, but for example the CPUs are stopped, the ACPI event gets queued and resume of the domain will just shut it off. https://bugzilla.redhat.com/show_bug.cgi?id=1216281Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
Since obtaining a job can wait for another job to finish, the state might change in the meantime. And checking it more than once is pointless. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Daniel P. Berrange 提交于
This bumps the release number of 2.0.0, to reflect the switch to a new time based release versioning scheme. The downloads page is updated to describe our policies for release schedules and release version numbering The stable release docs are changed to reflect the fact that the stable version numbers are now just 3 digits long instead of 4. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Jiri Denemark 提交于
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Martin Kletzander 提交于
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
This option allows or disallows detection of zero-writes if it is set to "on" or "off", respectively. It can be also set to "unmap" in which case it will try discarding that part of image based on the value of the "discard" option. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
Commit 11567cf6 introduced an include which will only work when building with xen (particularly libxl). However, that file is supposed to be includable from anywhere (as with other testutils* files. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Roman Bogorodskiy 提交于
Building with clang 3.8 triggers the following error: CC virt_host_validate-virt-host-validate-qemu.o virt-host-validate-qemu.c:36:11: error: initializing 'char *' with an expression of type 'const char *' discards qualifiers [-Werror,-Wincompatible-pointer-types-discards-qualifiers] char *kvmhint = _("Check that CPU and firmware supports virtualization " ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ virt-host-validate-qemu.c:46:17: error: assigning to 'char *' from 'const char *' discards qualifiers [-Werror,-Wincompatible-pointer-types-discards-qualifiers] kvmhint = _("Check that the 'kvm-intel' or 'kvm-amd' modules are " ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2 errors generated. Fix by using 'const' for kvmhint declaration.
-
由 Jim Fehlig 提交于
Populate libxl_domain_build_info struct with bios and firmware info from virDomainLoaderDef. Note: Currently libxl only allows specifying the type of BIOS. For type LIBXL_BIOS_TYPE_OVMF, the firmware path is configured when building Xen using '--with-system-ovmf='. If not specified, LIBXL_FIRMWARE_DIR/ovmf.bin is used. In the future, Xen will support a user-specified firmware path. See http://lists.xenproject.org/archives/html/xen-devel/2016-03/msg01628.html Once that work is merged into xen.git, the libvirt libxl driver will be able to honor a user-specified path. In the meantime use the implicit path, which is tolerable since it is advertised in domcapabilities. Signed-off-by: NJim Fehlig <jfehlig@suse.com>
-
由 Jim Fehlig 提交于
Add support to xenconfig for conversion of xl.cfg(5) bios config to/from libvirt domXml <loader> config. SeaBIOS is the default for HVM guests using upstream QEMU. ROMBIOS is the default when using the old qemu-dm. This patch allows specifying OVMF as an alternate firmware. Example xl.cfg: bios = "ovmf" Example domXML: <os> ... <loader readonly='yes' type='pflash'>/usr/lib/xen/boot/ovmf.bin</loader> </os> Note that currently Xen does not support a separate nvram for non-volatile variables. Signed-off-by: NJim Fehlig <jfehlig@suse.com>
-
由 Jim Fehlig 提交于
Add domain capabilities for PV and HVM domains. Signed-off-by: NJim Fehlig <jfehlig@suse.com>
-
由 Jim Fehlig 提交于
Move capabilities code out of libxl_conf.{ch} and into new libxl_capabilities.{ch} files. Signed-off-by: NJim Fehlig <jfehlig@suse.com>
-
由 Jim Fehlig 提交于
Prefer firmwares specified via --with-loader-nvram configure option. If none are specified, use the Xen-provided default firmwares found in LIBXL_FIRMWARE_DIR. Signed-off-by: NJim Fehlig <jfehlig@suse.com>
-
由 Jim Fehlig 提交于
The virQEMUDriverConfig object contains lists of loader:nvram pairs to advertise firmwares supported by by the driver, and qemu_conf.c contains code to populate the lists, all of which is useful for other drivers too. To avoid code duplication, introduce a virFirmware object to encapsulate firmware details and switch the qemu driver to use it. Signed-off-by: NJim Fehlig <jfehlig@suse.com>
-
- 13 6月, 2016 4 次提交
-
-
由 Wang Yufei 提交于
In libxl driver we do virObjectRef in libxlDomainObjBeginJob, If virCondWaitUntil failed, it goes to error, do virObjectUnref, There's a chance that someone undefine the vm at the same time, and refs unref to zero, vm is freed in libxlDomainObjBeginJob. But the vm outside function is not Null, we do virObjectUnlock(vm). That's how we overwrite the vm memory after it's freed. I fix it. Signed-off-by: NWang Yufei <james.wangyufei@huawei.com> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Riku Voipio 提交于
ARM/Aarch64 /proc/cpuinfo has no virtualization related flags. Refactor the Qemu/KVM test a bit: 1) run the "for hardware virtualization" test only on plaforms with known cpuinfo flags (x86, s390) 2) test for /dev/kvm also on platforms where no cpu flags are set Finally Add a more generic error hint message for non-x86 plaforms when /dev/kvm is missing. Signed-off-by: NRiku Voipio <riku.voipio@linaro.org> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Wei Liu 提交于
In 3704b900 ("tests: Add CPU detection tests"), a macro called DO_TEST_CPUID_JSON is added. But it took only two arguments when QEMU or YAJL is not set. Fix it by adding a third argument. Shouldn't have any effect because that macro compiles to nothing. Signed-off-by: NWei Liu <wei.liu2@citrix.com>
-
由 Roman Bogorodskiy 提交于
Currently, virt-login-shell is not allowed to build on Windows. However, as it's designed around LXC, it does not make sense to build it on anything but Linux, so make the check stricter and allow to enable it on Linux only.
-
- 12 6月, 2016 5 次提交
-
-
由 Guido Günther 提交于
otherwise we drop variables like XDG_RUNTIME_DIR with qemu:///session and libvirtd faild to find virtlogd's socket.
-
由 Roman Bogorodskiy 提交于
Don't use duplicating target dev names.
-
由 Roman Bogorodskiy 提交于
-
由 Roman Bogorodskiy 提交于
* Fix misspelt function name: s/virHostCPUGetStatsFreebsd/virHostCPUGetStatsFreeBSD/ * Mark the first argument to virHostCPUGetInfo with ATTRIBUTE_UNUSED as it's not actually used on non-Linux
-
由 Roman Bogorodskiy 提交于
SYSFS_SYSTEM_PATH is only defined for Linux, however it's used outside of #ifdef __linux__ code, e.g. as the first argument to nodeCapsInitNUMAFake(). But as this argument's value is used on Linux only, it's safe to define SYSFS_SYSTEM_PATH to "fake" to get things built on FreeBSD.
-
- 11 6月, 2016 8 次提交
-
-
由 Maxim Nestratov 提交于
As it turned out PrlVmDev_GetStackIndex can return negative values without reporting an error, which is incorrect but nevertheless. After that we feed this negative index to virIndexToDiskName, which in turn returns NULL and we set it to virDomainDiskDef.dst. Using virDiskNameToBusDeviceIndex with a virDomainDiskDef structure which has NULL dst field crashes. Fix this by returning an error in prlsdkGetDiskId in such cases. Signed-off-by: NMaxim Nestratov <mnestratov@virtuozzo.com>
-
由 Mikhail Feoktistov 提交于
-
由 Maxim Nestratov 提交于
Map PRL_ERR_UNIMPLEMENTED to VIR_ERR_OPERATION_INVALID Signed-off-by: NMaxim Nestratov <mnestratov@virtuozzo.com>
-
由 Maxim Nestratov 提交于
Signed-off-by: NMaxim Nestratov <mnestratov@virtuozzo.com>
-
由 Nikolay Shirokovskiy 提交于
The approach of subscribing on first stat API call and then waiting for receiving of performance event from sdk to process the call originates in times when every vz libvirt connections spawns its own sdk connection. Thus without this waiting virsh stat call would return empty stats. Now with single sdk connection this scheme is unnecessary complicated. This patch subscribes to performance events on first domain appearence and unsubscribe on its removing. Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com> Signed-off-by: NMaxim Nestratov <mnestratov@virtuozzo.com>
-
由 Nikolay Shirokovskiy 提交于
Naming scheme is next: virDomainPtr domain; virDomainObjPtr dom; Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
-
由 Pavel Hrdina 提交于
../../src/conf/domain_conf.c:10949: error: declaration of 'socket' shadows a global declaration [-Wshadow] ../../src/conf/domain_conf.c:24373: error: declaration of 'listen' shadows a global declaration [-Wshadow] Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Maxim Nestratov 提交于
After eaf18f4c some functions changed their homes Pushed under build breaking rule
-
- 10 6月, 2016 2 次提交
-
-
由 Michal Privoznik 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1298070 We have the code for attaching redirdevs for ages now. Unfortunately, our monitor code that handles talking to the qemu process was missing a little piece of code that actually enabled the feature. BTW: it really is called "type" on the monitor, even though it's called "name" on the cmd line. Don't ask. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
In the 162efa1a commit the function was introduced, but the commit forgot to update livirt_private.syms accordingly. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-