Old GCC on CentOS 6 thinks vendor and vendor_id might be used
uninitialized in virCPUDefStealModel. The compiler is wrong, though.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

In particular, this is a quick gnulib fix for a mingw compile error.

* .gnulib: Update to latest.
Signed-off-by: NEric Blake <eblake@redhat.com>

 * virNetDevTapCreateInBridgePort() mock: free '*ifname' before
   strdupping a hardoded value to it
 * testCompareXMLToArgvFiles(): unref 'conn' object in cleanup
 * testCompareXMLToArgvHelper(): free 'ldargs' and 'dmargs' in
   cleanup

Both transports include "password" in their default authentication
methods.

Implement in virtNetClient and VirNetSocket the needed functions to
expose a new libssh transport, providing all the options that the
libssh2 transport supports.

Implement a new libssh transport, which uses libssh to communicate with
remote hosts, and add all the build system stuff (search of libssh,
private symbols, etc) to built it.

This new transport supports all the common ssh authentication methods,
making use of libvirt's auth callbacks for interaction with the user.

Add a couple of helper functions to check whether one of the default
names of SSH keys (as documented in ssh-keygen(1)) exists, and use them
to specify a key for the libssh2 transport if none was passed.

Add a new error domain and number for a new libssh-based transport.

Add an internal variable to mark the FD as "not owned" by the
virNetSocket, in case the internal implementation takes the actual
ownership of the descriptor; this avoids a warning when closing the
socket, as the FD would be invalid.

The API is not used anywhere in the code.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Guest CPU definitions with mode='custom' and missing <vendor> are
expected to run on a host CPU from any vendor as long as the required
CPU model can be used as a guest CPU on the host. But even though no CPU
vendor was explicitly requested we would sometimes force it due to a bug
in virCPUUpdate and virCPUTranslate.

The bug would effectively forbid cross vendor migrations even if they
were previously working just fine.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

PPC driver needs to convert POWERx_v* legacy CPU model names into POWERx
to maintain backward compatibility with existing domains. This patch
adds a new step into the guest CPU configuration work flow which CPU
drivers can use to convert legacy CPU definitions.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The API is no longer used anywhere else since it was replaced by a much
saner work flow utilizing new APIs that work on virCPUDefPtr directly:
virCPUCompare, virCPUUpdate, and virCPUTranslate.

Not testing the new work flow caused some bugs to be hidden. This patch
reveals them, but doesn't attempt to fix them. To make sure all test
still pass after this patch, all affected test results are modified to
pretend the tests succeeded. All of the bugs will be fixed in the
following commits and the artificial modifications will be reverted.

The following is the list of bugs in the new CPU model work flow:

- a guest CPU with mode='custom' and missing <vendor/> gets the vendor
  copied from host's CPU (the vendor should only be copied to host-model
  CPUs):
    DO_TEST_UPDATE("x86", "host", "min", VIR_CPU_COMPARE_IDENTICAL)
    DO_TEST_UPDATE("x86", "host", "pentium3", VIR_CPU_COMPARE_IDENTICAL)
    DO_TEST_GUESTCPU("x86", "host-better", "pentium3", NULL, 0)

- when a guest CPU with mode='custom' needs to be translated into
  another model because the original model is not supported by a
  hypervisor, the result will have its vendor set to the vendor of the
  original CPU model as specified in cpu_map.xml even if the original
  guest CPU XML didn't contain <vendor/>:
    DO_TEST_GUESTCPU("x86", "host", "guest", model486, 0)
    DO_TEST_GUESTCPU("x86", "host", "guest", models, 0)
    DO_TEST_GUESTCPU("x86", "host-Haswell-noTSX", "Haswell-noTSX",
                     haswell, 0)

- legacy POWERx_v* model names are not recognized:
    DO_TEST_GUESTCPU("ppc64", "host", "guest-legacy", ppc_models, 0)
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The API doesn't change the array so let's make it constant.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Now that all tests pass NULL as the preferred model, we can just drop
that test parameter.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

In some cases preferred model doesn't really do anything since the
result remains the same even if it is removed.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Using a preferred model for guest CPUs with forbidden fallback masks a
bug in the code. It would just happily use another CPU model supported
by a hypervisor even though it is explicitly forbidden in the CPU XML.

This patch temporarily changes the expected result to -2, which is used
when the result XML file cannot be found (but it was supposed not to be
found since the tested API should have failed). The result will be
switched back to -1 few commits later when the original bug gets fixed.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Using a preferred CPU model which is not in the list of CPU models
supported by a hypervisor does not make sense.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Guest CPUs with match='minimum' should always be updated to match host
CPU model. Trying to get different results by supplying preferred models
does not make sense.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The new name is virCPUDataFormat.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The new name is virCPUDataParse.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The new name is virCPUModelIsAllowed.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The new name is virCPUGetModels.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

It was introduced by commit 7a51d9eb, which started to use
monitor commands without job acquiring, which is unsafe and leads
to simultaneous access to vm->mon structure by different threads.

Crash backtrace is the following (shortened):

Program received signal SIGSEGV, Segmentation fault.
qemuMonitorSend (mon=mon@entry=0x7f4ef4000d20, msg=msg@entry=0x7f4f18e78640) at qemu/qemu_monitor.c:1011
1011        while (!mon->msg->finished) {

0  qemuMonitorSend () at qemu/qemu_monitor.c:1011
1  0x00007f691abdc720 in qemuMonitorJSONCommandWithFd () at qemu/qemu_monitor_json.c:298
2  0x00007f691abde64a in qemuMonitorJSONCommand at qemu/qemu_monitor_json.c:328
3  qemuMonitorJSONQueryCPUs at qemu/qemu_monitor_json.c:1408
4  0x00007f691abcaebd in qemuMonitorGetCPUInfo g@entry=false) at qemu/qemu_monitor.c:1931
5  0x00007f691ab96863 in qemuDomainRefreshVcpuHalted at qemu/qemu_domain.c:6309
6  0x00007f691ac0af99 in qemuDomainGetStatsVcpu at qemu/qemu_driver.c:18945
7  0x00007f691abef921 in qemuDomainGetStats  at qemu/qemu_driver.c:19469
8  qemuConnectGetAllDomainStats at qemu/qemu_driver.c:19559
9  0x00007f693382e806 in virConnectGetAllDomainStats at libvirt-domain.c:11546
10 0x00007f6934470c40 in remoteDispatchConnectGetAllDomainStats at remote.c:6267

(gdb) p mon->msg
$1 = (qemuMonitorMessagePtr) 0x0

This change fixes it by calling qemuDomainRefreshVcpuHalted only when job is acquired.
Signed-off-by: NMaxim Nestratov <mnestratov@virtuozzo.com>

For machinetypes with a pci-root bus (all legacy PCI), libvirt will
make a "fake" reservation for one extra slot prior to assigning
addresses to unaddressed PCI endpoint devices in the domain. This will
trigger auto-adding of a pci-bridge for the final device to be
assigned an address *if that device would have otherwise instead been
the last device on the last available pci-bridge*; thus it assures
that there will always be at least one slot left open in the domain's
bus topology for expansion (which is important both for hotplug (since
a new pci-bridge can't be added while the guest is running) as well as
for offline additions to the config (since adding a new device might
otherwise in some cases require re-addressing existing devices, which
we want to avoid)).

It's important to note that for the above case (legacy PCI), we must
check for the special case of all slots on all buses being occupied
*prior to assigning any addresses*, and avoid attempting to reserve
the extra address in that case, because there is no free address in
the existing topology, so no place to auto-add a pci-bridge for
expansion (i.e. it would always fail anyway). Since that condition can
only be reached by manual intervention, this is acceptable.

For machinetypes with pcie-root (Q35, aarch64 virt), libvirt's
methodology for automatically expanding the bus topology is different
- pcie-root-ports are plugged into slots (soon to be functions) of
pcie-root as needed, and the new endpoint devices are assigned to the
single slot in each pcie-root-port. This is done so that the devices
are, by default, hotpluggable (the slots of pcie-root don't support
hotplug, but the single slot of the pcie-root-port does). Since
pcie-root-ports can only be plugged into pcie-root, and we don't
auto-assign endpoint devices to the pcie-root slots, this means
topology expansion doesn't compete with endpoint devices for slots, so
we don't need to worry about checking for all "useful" slots being
free *prior* to assigning addresses to new endpoint devices - as a
matter of fact, if we attempt to reserve the open slots before the
used slots, it can lead to errors.

Instead this patch just reserves one slot for a "future potential"
PCIe device after doing the assignment for actual devices, but only
if the only PCI controller defined prior to starting address
assignment was pcie-root, and only if we auto-added at least one PCI
controller during address assignment. This assures two things:

1) that reserving the open slots will only be done when the domain is
   initially defined, never at any time after, and

2) that if the user understands enough about PCI controllers that they
   are adding them manually, that we don't mess up their plan by
   adding extras - if they know enough to add one pcie-root-port, or
   to manually assign addresses such that no pcie-root-ports are
   needed, they know enough to add extra pcie-root-ports if they want
   them (this could be called the "libguestfs clause", since
   libguestfs needs to be able to create domains with as few
   devices/controllers as possible).

This is set to reserve a single free port for now, but could be
increased in the future if public sentiment goes in that direction
(it's easy to increase later, but essentially impossible to decrease)

Real Q35 hardware has an ICH9 chip that includes several integrated
devices at particular addresses (see the file docs/q35-chipset.cfg in
the qemu source). libvirt already attempts to put the first two sets
of ich9 USB2 controllers it finds at 00:1D.* and 00:1A.* to match the
real hardware. This patch does the same for the ich9 "HD audio"
device.

The main inspiration for this patch is that currently the *only*
device in a reasonable "workstation" type virtual machine config that
requires a legacy PCI slot is the audio device, Without this patch,
the standard Q35 machine created by virt-manager will have a
dmi-to-pci-bridge and a pci-bridge just for the sound device; with the
patch (and if you change the sound device model from the default
"ich6" to "ich9"), the machine definition constructed by virt-manager
has absolutely no legacy PCI controllers - any legacy PCI devices
(e.g. video and sound) are on pcie-root as integrated devices.

Previously we added a set of EHCI+UHCI controllers to Q35 machines to
mimic real hardware as closely as possible, but recent discussions
have pointed out that the nec-usb-xhci (USB3) controller is much more
virtualization-friendly (uses less CPU), so this patch switches the
default for Q35 machinetypes to add an XHCI instead (if it's
supported, which it of course *will* be).

Since none of the existing test cases left out USB controllers in the
input XML, a new Q35 test case was added which has *no* devices, so
ends up with only the defaults always put in by qemu, plus those added
by libvirt.

Now the a dmi-to-pci-bridge is automatically added just as it's needed
(when a pci-bridge is being added), we no longer have any need to
force-add one to every single Q35 domain.

A few of the qemu test cases assume that a dmi-to-pci-bridge will
always be added at index 1, and so they omit it from the input data
even though a pci-bridge is present at index 2, e.g.:

   <controller type='pci' index='0' model='pcie-root'/>
   <controller type='pci' index='2' model='pci-bridge'/>

Support for this odd practice was discussed on libvir-list and we
decided that the complex code required to make this continue was not
worth the headache of maintaining. So instead, this patch modifies the
test cases to manually add a dmi-to-pci-bridge at index 1 (since an
upcoming patch is going to eliminate the unconditional adding of
dmi-to-pci-bridge).

Because the auto-add was placing the dmi-to-pci-bridge later in the
list (even though it has a lower index) the test output is also
updated to take account for the new order (which puts the pci
controllers in index-order)

Previously libvirt would only add pci-bridge devices automatically
when an address was requested for a device that required a legacy PCI
slot and none was available. This patch expands that support to
dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a
machine with a pcie-root), and pcie-root-port (which is needed to add
a hotpluggable PCIe device). It does *not* automatically add
pcie-switch-upstream-ports or pcie-switch-downstream-ports (and
currently there are no plans for that).

Given the existing code to auto-add pci-bridge devices, automatically
adding pcie-root-ports is fairly straightforward. The
dmi-to-pci-bridge support is a bit tricky though, for a few reasons:

1) Although the only reason to add a dmi-to-pci-bridge is so that
   there is a reasonable place to plug in a pci-bridge controller,
   most of the time it's not the presence of a pci-bridge *in the
   config* that triggers the requirement to add a dmi-to-pci-bridge.
   Rather, it is the presence of a legacy-PCI device in the config,
   which triggers auto-add of a pci-bridge, which triggers auto-add of
   a dmi-to-pci-bridge (this is handled in
   virDomainPCIAddressSetGrow() - if there's a request to add a
   pci-bridge we'll check if there is a suitable bus to plug it into;
   if not, we first add a dmi-to-pci-bridge).

2) Once there is already a single dmi-to-pci-bridge on the system,
   there won't be a need for any more, even if it's full, as long as
   there is a pci-bridge with an open slot - you can also plug
   pci-bridges into existing pci-bridges. So we have to make sure we
   don't add a dmi-to-pci-bridge unless there aren't any
   dmi-to-pci-bridges *or* any pci-bridges.

3) Although it is strongly discouraged, it is legal for a pci-bridge
   to be directly plugged into pcie-root, and we don't want to
   auto-add a dmi-to-pci-bridge if there is already a pci-bridge
   that's been forced directly into pcie-root.

Although libvirt will now automatically create a dmi-to-pci-bridge
when it's needed, the code still remains for now that forces a
dmi-to-pci-bridge on all domains with pcie-root (in
qemuDomainDefAddDefaultDevices()). That will be removed in a future
patch.

For now, the pcie-root-ports are added one to a slot, which is a bit
wasteful and means it will fail after 31 total PCIe devices (30 if
there are also some PCI devices), but helps keep the changeset down
for this patch. A future patch will have 8 pcie-root-ports sharing the
functions on a single slot.

Andrea had the right idea when he disabled the "reserve an extra
unused slot" bit for aarch64/virt. For *any* PCI Express-based
machine, it is pointless since 1) an extra legacy-PCI slot can't be
used for hotplug, since hotplug into legacy PCI slots doesn't work on
PCI Express machinetypes, and 2) even for "coldplug" expansion,
everybody will want to expand using Express controllers, not legacy
PCI.

This patch eliminates the extra slot reserve unless the system has a
pci-root (i.e. legacy PCI)

The nec-usb-xhci device (which is a USB3 controller) has always
presented itself as a PCI device when plugged into a legacy PCI slot,
and a PCIe device when plugged into a PCIe slot, but libvirt has
always auto-assigned it to a legacy PCI slot.

This patch changes that behavior to auto-assign to a PCIe slot on
systems that have pcie-root (e.g. Q35 and aarch64/virt).

Since we don't yet auto-create pcie-*-port controllers on demand, this
means a config with an nec-xhci USB controller that has no PCI address
assigned will also need to have an otherwise-unused pcie-*-port
controller specified:

   <controller type='pci' model='pcie-root-port'/>
   <controller type='usb' model='nec-xhci'/>

(this assumes there is an otherwise-unused slot on pcie-root to accept
the pcie-root-port)

The e1000e is an emulated network device based on the Intel 82574,
present in qemu 2.7.0 and later. Among other differences from the
e1000, it presents itself as a PCIe device rather than legacy PCI. In
order to get it assigned to a PCIe controller, this patch updates the
flags setting for network devices when the model name is "e1000e".

(Note that for some reason libvirt has never validated the network
device model names other than to check that there are no dangerous
characters in them. That should probably change, but is the subject of
another patch.)

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1343094

libvirt previously assigned nearly all devices to a "hotpluggable"
legacy PCI slot even on machines with a PCIe root bus (and even though
most such machines don't even support hotplug on legacy PCI slots!)
Forcing all devices onto legacy PCI slots means that the domain will
need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a
pci-bridge (to provide hotpluggable legacy PCI slots which, again,
usually aren't hotpluggable anyway).

To help reduce the need for these legacy controllers, this patch tries
to assign virtio-1.0-capable devices to PCIe slots whenever possible,
by setting appropriate connectFlags in
virDomainCalculateDevicePCIConnectFlags(). Happily, when that function
was written (just a few commits ago) it was created with a
"virtioFlags" argument, set by both of its callers, which is the
proper connectFlags to set for any virtio-*-pci device - depending on
the arch/machinetype of the domain, and whether or not the qemu binary
supports virtio-1.0, that flag will have either been set to PCI or
PCIe. This patch merely enables the functionality by setting the flags
for the device to whatever is in virtioFlags if the device is a
virtio-*-pci device.

NB: the first virtio video device will be placed directly on bus 0
slot 1 rather than on a pcie-root-port due to the override for primary
video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not
to change that is a topic of discussion, but this patch doesn't change
that particular behavior.

NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root
complex) does *not* support hotplug, this means that suitable
controllers must also be in the config (i.e. either pcie-root-port, or
pcie-downstream-port). For now, libvirt doesn't add those
automatically, so if you put virtio devices in a config for a qemu
that has PCIe-capable virtio devices, you'll need to add extra
pcie-root-ports yourself. That requirement will be eliminated in a
future patch, but for now, it's simple to do this:

   <controller type='pci' model='pcie-root-port'/>
   <controller type='pci' model='pcie-root-port'/>
   <controller type='pci' model='pcie-root-port'/>
   ...

Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024

This patch cleans up the connect flags for certain types/models of
devices that aren't PCI to return 0. In the future that may be used as
an indicator to the caller about whether or not a device needs a PCI
address. For now it's just ignored, except for in
virDomainPCIAddressEnsureAddr() - called during device hotplug - (and
in some cases actually needs to be re-set to PCI|HOTPLUGGABLE just in
case someone (in some old config) has manually set a PCI address for a
device that isn't PCI.

Before now, all the qemu hotplug functions assumed that all devices to
be hotplugged were legacy PCI endpoint devices
(VIR_PCI_CONNECT_TYPE_PCI_DEVICE). This worked out "okay", because all
devices *are* legacy PCI endpoint devices on x86/440fx machinetypes,
and hotplug didn't work properly on machinetypes using PCIe anyway
(hotplugging onto a legacy PCI slot doesn't work, and until commit
b87703cf any attempt to manually specify a PCIe address for a
hotplugged device would be erroneously rejected).

This patch makes all qemu hotplug operations honor the pciConnectFlags
set by the single all-knowing function
qemuDomainDeviceCalculatePCIConnectFlags(). This is done in 3 steps,
but in a single commit since we would have to touch the other points
at each step anyway:

1) add a flags argument to the hypervisor-agnostic
virDomainPCIAddressEnsureAddr() (previously it hardcoded
..._PCI_DEVICE)

2) add a new qemu-specific function qemuDomainEnsurePCIAddress() which
gets the correct pciConnectFlags for the device from
qemuDomainDeviceConnectFlags(), then calls
virDomainPCIAddressEnsureAddr().

3) in qemu_hotplug.c replace all calls to
virDomainPCIAddressEnsureAddr() with calls to
qemuDomainEnsurePCIAddress()

So in effect, we're putting a "shim" on top of all calls to
virDomainPCIAddressEnsureAddr() that sets the right pciConnectFlags.

Set pciConnectFlags in each device's DeviceInfo and then use those
flags later when validating existing addresses in
qemuDomainCollectPCIAddress() and when assigning new addresses with
qemuDomainPCIAddressReserveNextAddr() (rather than scattering the
logic about which devices need which type of slot all over the place).

Note that the exact flags set by
qemuDomainDeviceCalculatePCIConnectFlags() are different from the
flags previously set manually in qemuDomainCollectPCIAddress(), but
this doesn't matter because all validation of addresses in that case
ignores the setting of the HOTPLUGGABLE flag, and treats PCIE_DEVICE
and PCI_DEVICE the same (this lax checking was done on purpose,
because there are some things that we want to allow the user to
specify manually, e.g. assigning a PCIe device to a PCI slot, that we
*don't* ever want libvirt to do automatically. The flag settings that
we *really* want to match are 1) the old flag settings in
qemuDomainAssignDevicePCISlots() (which is HOTPLUGGABLE | PCI_DEVICE
for everything except PCI controllers) and 2) the new flag settings
done by qemuDomainDeviceCalculatePCIConnectFlags() (which are
currently exactly that - HOTPLUGGABLE | PCI_DEVICE for everything
except PCI controllers).

The lowest level function of this trio
(qemuDomainDeviceCalculatePCIConnectFlags()) aims to be the single
authority for the virDomainPCIConnectFlags to use for any given device
using a particular arch/machinetype/qemu-binary.

qemuDomainFillDevicePCIConnectFlags() sets info->pciConnectFlags in a
single device (unless it has no virDomainDeviceInfo, in which case
it's a NOP).

qemuDomainFillAllPCIConnectFlags() sets info->pciConnectFlags in all
devices that have a virDomainDeviceInfo

The latter two functions aren't called anywhere yet. This commit is
just making them available. Later patches will replace all the current
hodge-podge of flag settings with calls to this single authority.

These functions provide a simple one line method of learning if the
current domain has a pci-root or pcie-root bus.