- 20 6月, 2017 2 次提交
-
-
由 Farhan Ali 提交于
Check for the LOADPARM capabilility and potentially add a loadparm=x to the "-machine" string for the QEMU command line. Also add xml2argv test cases for loadparm. Signed-off-by: NFarhan Ali <alifm@linux.vnet.ibm.com> Reviewed-by: NBjoern Walk <bwalk@linux.vnet.ibm.com> Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com> Reviewed-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
-
由 Farhan Ali 提交于
Update the per device boot schema to add an optional loadparm parameter. eg: <boot order='1' loadparm='2'/> Extend the virDomainDeviceInfo to support loadparm option. Modify the appropriate functions to parse loadparm from boot device xml. Add the xml2xml test to validate the field. Signed-off-by: NFarhan Ali <alifm@linux.vnet.ibm.com> Reviewed-by: NBjoern Walk <bwalk@linux.vnet.ibm.com> Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com> Reviewed-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
-
- 19 6月, 2017 1 次提交
-
-
由 Martin Kletzander 提交于
When added in multiple previous commits, it was used only with -device qxl(-vga), but for some QEMUs (< 1.6) we need to add this functionality when using -vga qxl as well. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1283207Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
- 14 6月, 2017 1 次提交
-
-
由 Michal Privoznik 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1214369 My fix 671d1859 was incomplete. If domain doesn't have hugepages enabled, because of missing condition we would still be putting hugepages path onto qemu cmd line. Clean up the conditions so that it's more visible next time. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 13 6月, 2017 4 次提交
-
-
由 Michal Privoznik 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1214369 Consider the following XML: <memoryBacking> <hugepages> <page size='2048' unit='KiB' nodeset='1'/> </hugepages> <source type='file'/> <access mode='shared'/> </memoryBacking> <numa> <cell id='0' cpus='0-3' memory='512000' unit='KiB'/> <cell id='1' cpus='4-7' memory='512000' unit='KiB'/> </numa> The following cmd line is generated: -object memory-backend-file,id=ram-node0,mem-path=/var/lib/libvirt/qemu/ram, share=yes,size=524288000 -numa node,nodeid=0,cpus=0-3,memdev=ram-node0 -object memory-backend-file,id=ram-node1,mem-path=/var/lib/libvirt/qemu/ram, share=yes,size=524288000 -numa node,nodeid=1,cpus=4-7,memdev=ram-node1 This is obviously wrong as for node 1 hugepages should have been used. The hugepages configuration is more specific than <source type='file'/>. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1214369 https://bugzilla.redhat.com/show_bug.cgi?id=1458638 Historically, we've always supported memAccess for domains backed by hugepages. However, somewhere along the way we've regressed and stopped allowing such configuration. Fix it. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
We have couple of hugepage enabled domains for qemuxml2argvtest. Unfortunately, often when adding a test case there I forget to add it to xml2xml test too. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Jiri Denemark 提交于
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
- 12 6月, 2017 1 次提交
-
-
由 Pavel Hrdina 提交于
Commit 824272cb attempted to fix escaping of characters in unix socket path but it was wrong. We need to escape only ',', there is no escape character for '='. Signed-off-by: NPavel Hrdina <phrdina@redhat.com> Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
-
- 08 6月, 2017 13 次提交
-
-
由 Ján Tomko 提交于
Format iommu_platform= and ats= for virtio devices. https://bugzilla.redhat.com/show_bug.cgi?id=1283251Reviewed-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Ján Tomko 提交于
Add a test case to demonstrate the addition of new command line options https://bugzilla.redhat.com/show_bug.cgi?id=1283251Reviewed-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Ján Tomko 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1283251Reviewed-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Ján Tomko 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1283251Reviewed-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Ján Tomko 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1283251Reviewed-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Ján Tomko 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1283251Reviewed-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Ján Tomko 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1283251Reviewed-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Ján Tomko 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1283251Reviewed-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Ján Tomko 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1283251Reviewed-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Ján Tomko 提交于
<interface type='user'> <mac address='52:54:56:5a:5c:5e'/> <model type='virtio'/> <driver iommu='on' ats='on'/> </interface> https://bugzilla.redhat.com/show_bug.cgi?id=1283251Reviewed-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Ján Tomko 提交于
Add a test case with all the virtio devices we know to demonstrate the addition of new options. https://bugzilla.redhat.com/show_bug.cgi?id=1283251Reviewed-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Ján Tomko 提交于
Format the device-iotlb attribute. https://bugzilla.redhat.com/show_bug.cgi?id=1283251Reviewed-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Ján Tomko 提交于
Add a new iotlb attribute to the iommu device to control the device IOTLB support for intel-iommu. https://bugzilla.redhat.com/show_bug.cgi?id=1283251Reviewed-by: NPavel Hrdina <phrdina@redhat.com>
-
- 26 5月, 2017 2 次提交
-
-
由 Ján Tomko 提交于
This option turns on extended interrupt mode, which allows more than 255 vCPUs. https://bugzilla.redhat.com/show_bug.cgi?id=1451282Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
-
由 Ján Tomko 提交于
Add an attribute to control extended interrupt mode. https://bugzilla.redhat.com/show_bug.cgi?id=1451282Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
-
- 16 5月, 2017 3 次提交
-
-
由 Andrea Bolognani 提交于
There are currently some limitations in the emulated GICv3 that make it unsuitable as a default. Use GICv2 instead. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1450433Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
-
由 Andrea Bolognani 提交于
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
-
由 Pavel Hrdina 提交于
Currently we consider all UNIX paths with specific prefix as generated by libvirt, but that's a wrong assumption. Let's make the detection better by actually checking whether the whole path matches one of the paths that we generate or generated in the past. The UNIX path isn't stored in config XML since libvirt-1.3.1. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1446980Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
- 15 5月, 2017 6 次提交
-
-
由 Ján Tomko 提交于
Format the caching-mode option for the intel-iommu device, based on its <driver caching> attribute value. https://bugzilla.redhat.com/show_bug.cgi?id=1427005
-
由 Ján Tomko 提交于
Add a new attribute to control the caching mode. https://bugzilla.redhat.com/show_bug.cgi?id=1427005
-
-
由 Ján Tomko 提交于
Add a new attribute to control interrupt remapping. https://bugzilla.redhat.com/show_bug.cgi?id=1427005
-
由 Ján Tomko 提交于
Add kernel_irqchip=split/on to the QEMU command line and a capability that looks for it in query-command-line-options output. For the 'split' option, use a version check since it cannot be reasonably probed. https://bugzilla.redhat.com/show_bug.cgi?id=1427005
-
由 Ján Tomko 提交于
Add a new <ioapic> element with a driver attribute. Possible values are qemu and kvm. With 'qemu', the I/O APIC can be put in the userspace even for KVM domains. https://bugzilla.redhat.com/show_bug.cgi?id=1427005
-
- 28 4月, 2017 4 次提交
-
-
由 Pavel Hrdina 提交于
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1438682Signed-off-by: NPavel Hrdina <phrdina@redhat.com> Acked-by: NAndrea Bolognani <abologna@redhat.com>
-
由 Pavel Hrdina 提交于
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1438682Signed-off-by: NPavel Hrdina <phrdina@redhat.com> Acked-by: NAndrea Bolognani <abologna@redhat.com>
-
由 Pavel Hrdina 提交于
This is a USB3 controller and it's a better choice than piix3-uhci. Signed-off-by: NPavel Hrdina <phrdina@redhat.com> Acked-by: NAndrea Bolognani <abologna@redhat.com>
-
由 Jiri Denemark 提交于
This patch maps /domain/cpu/cache element into -cpu parameters: - <cache mode='passthrough'/> is translated to host-cache-info=on - <cache level='3' mode='emulate'/> is transformed into l3-cache=on - <cache mode='disable'/> is turned in host-cache-info=off,l3-cache=off Any other <cache> element is forbidden. The tricky part is detecting whether QEMU supports the CPU properties. The 'host-cache-info' property is introduced in v2.4.0-1389-ge265e3e480, earlier QEMU releases enabled host-cache-info by default and had no way to disable it. If the property is present, it defaults to 'off' for any QEMU until at least 2.9.0. The 'l3-cache' property was introduced later by v2.7.0-200-g14c985cffa. Earlier versions worked as if l3-cache=off was passed. For any QEMU until at least 2.9.0 l3-cache is 'off' by default. QEMU 2.9.0 was the first release which supports probing both properties by running device-list-properties with typename=host-x86_64-cpu. Older QEMU releases did not support device-list-properties command for CPU devices. Thus we can't really rely on probing them and we can just use query-cpu-model-expansion QMP command as a witness. Because the cache property probing is only reliable for QEMU >= 2.9.0 when both are already supported for quite a few releases, we let QEMU report an error if a specific cache mode is explicitly requested. The other mode (or both if a user requested CPU cache to be disabled) is explicitly turned off for QEMU >= 2.9.0 to avoid any surprises in case the QEMU defaults change. Any older QEMU already turns them off so not doing so explicitly does not make any harm. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
- 21 4月, 2017 1 次提交
-
-
由 Martin Kletzander 提交于
We are currently parsing only rx/frames/max because that's the only value that makes sense for us. The tun device just added support for this one and the others are only supported by hardware devices which we don't need to worry about as the only way we'd pass those to the domain is using <hostdev/> or <interface type='hostdev'/>. And in those cases the guest can modify the settings itself. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
- 13 4月, 2017 1 次提交
-
-
由 Ján Tomko 提交于
Properly error out when the user requests a port from a bus that does not have a controller present in the domain XML. https://bugzilla.redhat.com/show_bug.cgi?id=1441589
-
- 11 4月, 2017 1 次提交
-
-
由 Pavel Hrdina 提交于
Our test data used a lot of different qemu binary paths and some of them were based on downstream systems. Note that there is one file where I had to add "accel=kvm" because the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm". Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-