- 18 2月, 2010 2 次提交
-
-
由 Jim Meyering 提交于
* src/openvz/openvz_conf.c (openvzLoadDomains): Diagnose failure of virUUIDFormat.
-
由 Cole Robinson 提交于
The recent commit to implement a python version of this function didn't drop an explicit 'ignore' check in the generator, so this never ended up in the bindings.
-
- 17 2月, 2010 16 次提交
-
-
由 Eric Blake 提交于
Silence a libtoolize warning. * configure.ac (AC_CONFIG_MACRO_DIR): Add.
-
由 Jiri Denemark 提交于
* tools/virsh.c: add a command to compute a CPU baseline based on multiple CPU definitions in an XML chunk * tools/virsh.pod: add it to the man page
-
由 Jim Meyering 提交于
There is no real leak here, but Coverity-Prevent thinks there is. It does not see that while there are four ways to return from vshCommandGetToken with VSH_TK_END, none of them results in allocation of a result. * tools/virsh.c (vshCommandParse): Add a (currently) useless VIR_FREE, to ensure that we never leak when vshCommandGetToken returns VSH_TK_END.
-
由 Jim Meyering 提交于
* src/qemu/qemu_monitor_text.c (qemuMonitorTextAddUSBDisk): Free command output buffer.
-
由 Jim Meyering 提交于
* tests/qemuxml2argvtest.c (testCompareXMLToArgvFiles): Handle malloc failure.
-
由 Jim Meyering 提交于
* src/qemu/qemu_driver.c (qemuInitPasswords): Free pass-phrase buffer.
-
由 Jim Meyering 提交于
* src/qemu/qemu_monitor_text.c (qemuMonitorTextAddDevice): Free the device name buffer.
-
由 Jim Meyering 提交于
* python/libvirt-override.c (libvirt_virConnectBaselineCPU): Don't leak the xmlcpus buffer upon encountering a non-string list element.
-
由 Jim Meyering 提交于
* src/vbox/vbox_tmpl.c (vboxDomainDumpXML): Free vboxCallback buffer upon OOM.
-
由 Jim Meyering 提交于
* src/conf/node_device_conf.c (virNodeDevCapScsiHostParseXML): Free the "nodes" buffer allocated by virXPathNodeSet.
-
由 Jim Meyering 提交于
* src/uml/uml_driver.c (umlMonitorCommand): This function would sometimes return -1, yet fail to free the "reply" it had allocated. Hence, no caller would know to free the corresponding argument. When returning -1, be sure to free all allocated resources.
-
由 Jim Meyering 提交于
* src/vbox/vbox_tmpl.c (vboxDomainDumpXML): Free def. Improved by Matthias Bolte.
-
由 Jim Meyering 提交于
* src/openvz/openvz_conf.c (openvzFreeDriver): Also free driver buffer. Based on a suggestion from Matthias Bolte.
-
由 Jim Meyering 提交于
* src/storage/storage_backend_mpath.c (virStorageBackendIsMultipath): The result of dm_get_next_target was never used (and isn't needed), so don't store it.
-
由 Cole Robinson 提交于
Similar to the Set*Mem commands, this implementation was bogus and misleading. Make it clear this is a hotplug only operation, and that the hotplug piece isn't even implemented. Also drop the overkill maxvcpus validation: we don't perform this check at XML define time so clearly no one is missing it, and there is always the risk that our info will be out of date, possibly preventing legitimate CPU values. Signed-off-by: NCole Robinson <crobinso@redhat.com>
-
由 Cole Robinson 提交于
SetMem and SetMaxMem are hotplug only APIs, any persistent config changes are supposed to go via XML definition. The original implementation of these calls were incorrect and had the nasty side effect of making a psuedo persistent change that would be lost after libvirtd restart (I didn't know any better). Fix these APIs to rightly reject non running domains. Signed-off-by: NCole Robinson <crobinso@redhat.com>
-
- 16 2月, 2010 9 次提交
-
-
由 Daniel P. Berrange 提交于
The plain QEMU tree does not include 'thread_id' in the JSON output. Thus we need to treat it as non-fatal if missing. * src/qemu/qemu_monitor_json.c: Treat missing thread_id as non-fatal
-
由 Daniel P. Berrange 提交于
A typo in the check for the primary IDE controller could cause a crash on restore depending on the exact guest config. * src/qemu/qemu_conf.c: Fix s/video/controller/ typo & slot number typo
-
由 Daniel P. Berrange 提交于
Current error reporting for JSON mode returns the full JSON command string and full JSON error string. This is not very user friendly, so this change makes the error report only contain the basic command name, and friendly error message description string. The full JSON data is logged instead. * src/qemu/qemu_monitor_json.c: Always return the 'desc' field from the JSON error message to users.
-
由 Daniel P. Berrange 提交于
When in JSON mode, QEMU requires that 'qmp_capabilities' is run as the first command in the monitor. This is a no-op when run in the text mode monitor * src/qemu/qemu_driver.c: Run capabilities negotiation when connecting to the monitor * src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h, src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h: Add support for the 'qmp_capabilities' command, no-op in text mode.
-
由 Stefan Berger 提交于
* docs/schemas/domain.rng: extends the domain xml schema to support the new interface type 'direct'
-
由 Stefan Berger 提交于
This part adds support for qemu making a macvtap tap device available via file descriptor passed to qemu command line. This also attempts to tear down the macvtap device when a VM terminates. This includes support for attachment and detachment to/from running VM. * src/qemu/qemu_conf.[ch] src/qemu/qemu_driver.c: add support in the QEmu driver
-
由 Stefan Berger 提交于
This part adds the helper code to setup and tear down macvtap devices using direct communication with the device driver via netlink sockets. The rather short messages received from the netlink layer are now written into a dynamically allocated buffer * src/util/macvtap.h src/util/macvtap.c: provides the new module * po/POTFILES.in: the module contains translated strings
-
由 Stefan Berger 提交于
This part adds support to domain_conf.{c|h} for parsing the new interface XML of type 'direct'. The parsed mode is now stored as an int. * src/conf/domain_conf.c src/conf/domain_conf.h: extend parsing code * src/util/macvtap.h: empty header to not break compilation
-
由 Stefan Berger 提交于
This patch adds build support for libvirt checking for certain contents of /usr/include/linux/if_link.h to see whether macvtap support is compilable on that system. One can disable macvtap support in libvirt via --without-macvtap passed to configure. * configure.ac src/Makefile.am: new build support * src/libvirt_macvtap.syms: list of exported symbols * src/util/macvtap.c: empty module to not break compilation
-
- 15 2月, 2010 2 次提交
-
-
由 Matthias Bolte 提交于
The open function returned -1 in case of an error, but -1 maps to VIR_DRV_OPEN_DECLINED instead of VIR_DRV_OPEN_ERROR.
-
由 Matthias Bolte 提交于
The virRaiseError macro inside of virSecurityReportError expands to virRaiseErrorFull and includes the __FILE__, __FUNCTION__ and __LINE__ information. But this three values are always the same for every call to virSecurityReportError and do not reflect the actual error context. Converting virSecurityReportError into a macro results in getting the correct __FILE__, __FUNCTION__ and __LINE__ information.
-
- 13 2月, 2010 4 次提交
-
-
由 Daniel P. Berrange 提交于
Current PCI addresses are allocated at time of VM startup. To make them truely persistent, it is neccessary to do this at time of virDomainDefine/virDomainCreate. The code in qemuStartVMDaemon still remains in order to cope with upgrades from older libvirt releases * src/qemu/qemu_driver.c: Rename existing qemuAssignPCIAddresses to qemuDetectPCIAddresses. Add new qemuAssignPCIAddresses which does auto-allocation upfront. Call qemuAssignPCIAddresses from qemuDomainDefine and qemuDomainCreate to assign PCI addresses that can then be persisted. Don't clear PCI addresses at shutdown if they are intended to be persistent
-
由 Daniel P. Berrange 提交于
If giving a lxc:// URI instead of lxc:/// the open method would crash ona NULL pointer * src/lxc/lxc_driver.c: Cope with a NULL URI path
-
由 Daniel P. Berrange 提交于
* src/util/hostusb.c: The device path for a USB device wants the bus/device IDs in decimal not octal
-
由 Daniel P. Berrange 提交于
The old text mode monitor prompts for a password when disks are encrypted. This interactive approach doesn't work for JSON mode monitor. Thus there is a new 'block_passwd' command that can be used. * src/qemu/qemu_driver.c: Split out code for looking up a disk secret from findVolumeQcowPassphrase, into a new method getVolumeQcowPassphrase. Enhance qemuInitPasswords() to also set the disk encryption password via the monitor * src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h, src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h, src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add support for the 'block_passwd' monitor command.
-
- 12 2月, 2010 7 次提交
-
-
由 Jiri Denemark 提交于
-
由 Jiri Denemark 提交于
-
由 Jiri Denemark 提交于
-
由 Jiri Denemark 提交于
-
由 Jiri Denemark 提交于
-
由 Jiri Denemark 提交于
-
由 Jiri Denemark 提交于
-