- 27 6月, 2011 1 次提交
-
-
由 Eric Blake 提交于
We already have a public virDomainPinVcpu, which implies that Pin and Vcpu are treated as separate words. Unreleased commit e261987c introduced virDomainGetVcpupinInfo as the first public API that used Vcpupin, although we had prior internal uses of that spelling. For consistency, change the spelling to be two words everywhere, regardless of whether pin comes first or last. * daemon/remote.c: Treat vcpu and pin as separate words. * include/libvirt/libvirt.h.in: Likewise. * src/conf/domain_conf.c: Likewise. * src/conf/domain_conf.h: Likewise. * src/driver.h: Likewise. * src/libvirt.c: Likewise. * src/libvirt_private.syms: Likewise. * src/libvirt_public.syms: Likewise. * src/libxl/libxl_driver.c: Likewise. * src/qemu/qemu_driver.c: Likewise. * src/remote/remote_driver.c: Likewise. * src/xen/xend_internal.c: Likewise. * tools/virsh.c: Likewise. * src/remote/remote_protocol.x: Likewise. * src/remote_protocol-structs: Likewise. Suggested by Matthias Bolte.
-
- 25 6月, 2011 1 次提交
-
-
由 Taku Izumi 提交于
This patch implements the remote protocol to address the new API (virDomainGetVcpupinInfo). Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>
-
- 24 6月, 2011 2 次提交
-
-
由 Eric Blake 提交于
This reverts commit d1693bb1. Conflicts: daemon/remote.c src/remote/remote_driver.c src/remote/remote_protocol.x
-
由 Eric Blake 提交于
This reverts commit 12cd77a0. Conflicts: python/libvirt-override-virConnect.py python/libvirt-override.c src/remote/remote_protocol.x
-
- 20 6月, 2011 3 次提交
-
-
由 Matthias Bolte 提交于
Removes special case code from the generator and handle additional methods. The generated version of remoteDispatchDomainPinVcpu(Flags) has no length check, but this check was useless anyway as it was applied to data that was already deserialized from its XDR form.
-
由 Matthias Bolte 提交于
-
由 Matthias Bolte 提交于
It was already generatable but skipped.
-
- 17 6月, 2011 1 次提交
-
-
由 Jiri Denemark 提交于
-
- 15 6月, 2011 6 次提交
-
-
由 Matthias Bolte 提交于
The position of the struct parameter in the function signature differs. Instead of hardcoding the handling for this add an annotation to the .x file to define the position.
-
由 Adam Litke 提交于
When an operation started by virDomainBlockPullAll completes (either with success or with failure), raise an event to indicate the final status. This allows an API user to avoid polling on virDomainBlockPullInfo if they would prefer to use the event mechanism. * daemon/remote.c: Dispatch events to client * include/libvirt/libvirt.h.in: Define event ID and callback signature * src/conf/domain_event.c, src/conf/domain_event.h, src/libvirt_private.syms: Extend API to handle the new event * src/qemu/qemu_driver.c: Connect to the QEMU monitor event for block_stream completion and emit a libvirt block pull event * src/remote/remote_driver.c: Receive and dispatch events to application * src/remote/remote_protocol.x: Wire protocol definition for the event * src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h, src/qemu/qemu_monitor_json.c: Watch for BLOCK_STREAM_COMPLETED event from QEMU monitor Signed-off-by: NAdam Litke <agl@us.ibm.com>
-
由 Adam Litke 提交于
The generator can handle DomainBlockPullAll and DomainBlockPullAbort. DomainBlockPull and DomainBlockPullInfo must be written by hand. * src/remote/remote_protocol.x: provide defines for the new entry points * src/remote/remote_driver.c daemon/remote.c: implement the client and server side * src/remote_protocol-structs: structure definitions for protocol verification Signed-off-by: NAdam Litke <agl@us.ibm.com>
-
由 Minoru Usui 提交于
Signed-off-by: NMinoru Usui <usui@mxm.nes.nec.co.jp>
-
由 Minoru Usui 提交于
Signed-off-by: NMinoru Usui <usui@mxm.nes.nec.co.jp>
-
由 Lai Jiangshan 提交于
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
-
- 13 6月, 2011 1 次提交
-
-
由 Taku Izumi 提交于
This patch implements the remote protocol for the new API (virDomainPinVcpuFlags).
-
- 01 6月, 2011 1 次提交
-
-
由 Matthias Bolte 提交于
This doesn't cover the getters that allow to query nparams yet.
-
- 29 5月, 2011 3 次提交
-
-
由 Daniel P. Berrange 提交于
This introduces a new domain VIR_DOMAIN_EVENT_ID_CONTROL_ERROR Which uses the existing generic callback typedef void (*virConnectDomainEventGenericCallback)(virConnectPtr conn, virDomainPtr dom, void *opaque); This event is intended to be emitted when there is a failure in some part of the domain virtualization system. Whether the domain continues to run/exist after the failure is an implementation detail specific to the hypervisor. The idea is that with some types of failure, hypervisors may prefer to leave the domain running in a "degraded" mode of operation. For example, if something goes wrong with the QEMU monitor, it is possible to leave the guest OS running quite happily. The mgmt app will simply loose the ability todo various tasks. The mgmt app can then choose how/when to deal with the failure that occured. * daemon/remote.c: Dispatch of new event * examples/domain-events/events-c/event-test.c: Demo catch of event * include/libvirt/libvirt.h.in: Define event ID and callback * src/conf/domain_event.c, src/conf/domain_event.h: Internal event handling * src/remote/remote_driver.c: Receipt of new event from daemon * src/remote/remote_protocol.x: Wire protocol for new event * src/remote_protocol-structs: add new event for checks
-
由 Eric Blake 提交于
* daemon/remote.c (remoteDispatchDomainGetSchedulerParameters): New function. * src/remote/remote_driver.c (remoteDomainGetSchedulerParameters): Likewise. * src/remote/remote_protocol.x (remote_domain_get_scheduler_parameters_flags_args) (remote_domain_get_scheduler_parameters_flags_ret): New types. (remote_procedure): New RPC. * src/remote_protocol-structs: Likewise.
-
由 Eric Blake 提交于
* src/remote/remote_protocol.x (remote_typed_param_value) (remote_typed_param): New types. (remote_sched_param_value, remote_sched_param) (remote_blkio_param_value, remote_blkio_param) (remote_memory_param_value, remote_memory_param): Delete. (remote_domain_get_scheduler_parameters_ret) (remote_domain_set_scheduler_parameters_args) (remote_domain_set_scheduler_parameters_flags_args) (remote_domain_set_blkio_parameters_args) (remote_domain_get_blkio_parameters_ret) (remote_domain_set_memory_parameters_args) (remote_domain_get_memory_parameters_ret): Update clients. * src/remote_protocol-structs: Likewise. * src/remote/remote_driver.c (remoteSerializeTypedParameters) (remoteDeserializeTypedParameters): New functions. (remoteDomainSetMemoryParameters) (remoteDomainGetMemoryParameters, remoteDomainSetBlkioParameters) (remoteDomainGetBlkioParameters) (remoteDomainGetSchedulerParameters) (remoteDomainSetSchedulerParameters) (remoteDomainSetSchedulerParametersFlags): Update clients. * daemon/remote.c (remoteSerializeTypedParameters) (remoteDeserializeTypedParameters): New functions. (remoteDispatchDomainGetSchedulerParameters) (remoteDispatchDomainSetSchedulerParameters) (remoteDispatchDomainSetSchedulerParametersFlags) (remoteDispatchDomainSetMemoryParameters) (remoteDispatchDomainGetMemoryParameters) (remoteDispatchDomainSetBlkioParameters) (remoteDispatchDomainGetBlkioParameters): Update clients.
-
- 28 5月, 2011 1 次提交
-
-
由 Michal Privoznik 提交于
-
- 26 5月, 2011 6 次提交
-
-
由 Matthias Bolte 提交于
In most cases this affects flags parameters that are unsigned in the public and driver API but signed in the XDR protocol. Switch the XDR protocol to unsigned for those. A counterexample is virNWFilterGetXMLDesc. Its flags parameter is signed in the public API and XDR protocol, but unsigned in the driver API.
-
由 Matthias Bolte 提交于
virNodeGetFreeMemory used unsigned long long in the public API but signed hyper in the XDR protocol. Convert the XDR protocol to use unsigned hyper. As explained by Eric before, this doesn't affect the on-the-wire protocol.
-
由 Matthias Bolte 提交于
Extend procedure annotation in the .x file for stream handling. Adds a missing remoteStreamRelease call to remoteDomainScreenshot error path.
-
由 Matthias Bolte 提交于
Several functions return values by reference parameters. This is realized by passing the members of remote_CALL_ret by reference to the called function. The position of this parameters in the function signature follows some patterns with some exceptions. This patterns and exceptions are hardcoded in the generator. Add an insert@<offset> annotation to the remote_CALL_ret struct members for functions that return lists to remove some of the hardcoded patterns and exceptions.
-
由 Matthias Bolte 提交于
This allows to remove some special case code from the generator.
-
由 Matthias Bolte 提交于
Add special case code for updating a given domain object instead of returning a new one.
-
- 25 5月, 2011 3 次提交
-
-
由 Daniel P. Berrange 提交于
The current virDomainMigrateFinish3 method signature attempts to distinguish two types of errors, by allowing return with ret== 0, but ddomain == NULL, to indicate a failure to start the guest. This is flawed, because when ret == 0, there is no way for the virErrorPtr details to be sent back to the client. Change the signature of virDomainMigrateFinish3 so it simply returns a virDomainPtr, in the same way as virDomainMigrateFinish2 The disk locking code will protect against the only possible failure mode this doesn't account for (loosing conenctivity to libvirtd after Finish3 starts the CPUs, but before the client sees the reply for Finish3). * src/driver.h, src/libvirt.c, src/libvirt_internal.h: Change virDomainMigrateFinish3 to return a virDomainPtr instead of int * src/remote/remote_driver.c, src/remote/remote_protocol.x, daemon/remote.c, src/qemu/qemu_driver.c, src/qemu/qemu_migration.c: Update for API change
-
由 Daniel P. Berrange 提交于
The virDomainMigratePerform3 currently has a single URI parameter whose meaning varies. It is either - A QEMU migration URI (normal migration) - A libvirtd connection URI (peer2peer migration) Unfortunately when using peer2peer migration, without also using tunnelled migration, it is possible that both URIs are required. This adds a second URI parameter to the virDomainMigratePerform3 method, to cope with this scenario. Each parameter how has a fixed meaning. NB, there is no way to actually take advantage of this yet, since virDomainMigrate/virDomainMigrateToURI do not have any way to provide the 2 separate URIs * daemon/remote.c, src/remote/remote_driver.c, src/remote/remote_protocol.x, src/remote_protocol-structs: Add the second URI parameter to perform3 message * src/driver.h, src/libvirt.c, src/libvirt_internal.h: Add the second URI parameter to Perform3 method * src/libvirt_internal.h, src/qemu/qemu_migration.c, src/qemu/qemu_migration.h: Update to handle URIs correctly
-
由 Daniel P. Berrange 提交于
This extends the v3 migration protocol such that the virDomainMigrateBegin3 and virDomainMigratePerform3 methods accept an application supplied XML config for the target VM. If the 'xmlin' parameter is NULL, then Begin3 uses the current guest XML as normal. A driver implementing the Begin3 method should either reject all non-NULL 'xmlin' parameters, or strictly validate that the app supplied XML does not change guest ABI. The Perform3 method also needed the xmlin parameter to cope with the Peer2Peer migration sequence. NB it is not yet possible to use this capability since neither of the public virDomainMigrate/virDomainMigrateToURI methods have a way to pass in XML. * daemon/remote.c, src/remote/remote_driver.c, src/remote/remote_protocol.x, src/remote_protocol-structs: Add 'remote_string xmlin' parameter to begin3/perform3 RPC messages * src/libvirt.c, src/driver.h, src/libvirt_internal.h: Add 'const char *xmlin' parameter to Begin3/Perform3 methods * src/qemu/qemu_driver.c, src/qemu/qemu_migration.c, src/qemu/qemu_migration.h: Pass xmlin parameter around migration methods
-
- 21 5月, 2011 1 次提交
-
-
由 Matthias Bolte 提交于
-
- 19 5月, 2011 1 次提交
-
-
由 Eric Blake 提交于
The on-the-wire protocol is identical; XDR guarantees that both 'hyper' and 'unsigned hyper' are transmitted as 8 bytes. * src/remote/remote_protocol.x (remote_get_version_ret) (remote_get_lib_version_ret): Match public API. * daemon/remote_generator.pl: Drop special case. * src/remote_protocol-structs: Reflect updated type.
-
- 18 5月, 2011 1 次提交
-
-
由 Hu Tao 提交于
support for virDomainSetSchedulerParametersFlags of remote driver.
-
- 17 5月, 2011 2 次提交
-
-
由 Matthias Bolte 提交于
For virDomainDestroy and virDrvSupportsFeature.
-
由 Matthias Bolte 提交于
-
- 16 5月, 2011 3 次提交
-
-
由 Daniel P. Berrange 提交于
The migration protocol has support for a 'cookie' parameter which is an opaque array of bytes as far as libvirt is concerned. Drivers may use this for passing around arbitrary extra data they might need during migration. The QEMU driver needs to do a few things: - Pass hostname/uuid to allow strict protection against localhost migration attempts - Pass SPICE/VNC server port from the target back to the source to allow seamless relocation of client sessions - Pass lock driver state from source to destination This patch introduces the basic glue for handling cookies but only includes the host/guest UUID & name. * src/libvirt_private.syms: Export virXMLParseStrHelper * src/qemu/qemu_migration.c, src/qemu/qemu_migration.h: Parsing and formatting of migration cookies * src/qemu/qemu_driver.c: Pass in cookie parameters where possible * src/remote/remote_protocol.h, src/remote/remote_protocol.x: Change cookie max length to 16384 bytes
-
由 Daniel P. Berrange 提交于
* src/remote/remote_protocol.x: Define wire protocol for migration protocol v3 * daemon/remote.c: Server side dispatch * src/remote/remote_driver.c: Client side serialization * src/remote/remote_protocol.c, src/remote/remote_protocol.h, daemon/remote_dispatch_args.h, daemon/remote_dispatch_prototypes.h, daemon/remote_dispatch_ret.h, daemon/remote_dispatch_table.h: Re-generate files * src/remote_protocol-structs: Declare new ABIs
-
由 Jiri Denemark 提交于
-
- 13 5月, 2011 1 次提交
-
-
由 Michal Privoznik 提交于
* src/remote/remote_protocol.x: Wire protocol definition * daemon/remote.c: Daemon part * src/remote/remote_driver.c: Client part * src/remote_protocol-structs: Add structures
-
- 12 5月, 2011 1 次提交
-
-
由 Matthias Bolte 提交于
Make procedure parsing more robust, by allowing arbitrary amounts of whitespaces. Also make some error messages more verbose.
-
- 11 5月, 2011 1 次提交
-
-
由 Matthias Bolte 提交于
Rename u_int and unsigned to unsigned int. This gets rid of some special case code in the generator.
-