Commit id 'fb2bd208' essentially copied the qemuGetSecretString
creating an libxlGetSecretString.  Rather than have multiple copies
of the same code, create src/secret/secret_util.{c,h} files and
place the common function in there.

Modify the the build in order to build the module as a library
which is then pulled in by both the qemu and libxl drivers for
usage from both qemu_command.c and libxl_conf.c

If the -object secret capability exists, then get the path to the
masterKey file and provide that to qemu. Checking for the existence
of the file before passing to qemu could be done, but causes issues
in mock test environment.

Since the qemuDomainObjPrivate is not available when building the
command line, the qemuBuildHasMasterKey API will have to suffice
as the primary arbiter for whether the capability exists in order
to find/return the path to the master key for usage.

Created the qemuDomainGetMasterKeyAlias API which will be used by
later patches to define the 'keyid' (eg, masterKey) to be used by
other secrets to provide the id to qemu for the master key.

Add a masterKey and masterKeyLen to _qemuDomainObjPrivate to store a
random domain master key and its length in order to support the ability
to encrypt/decrypt sensitive data shared between libvirt and qemu. The
key will be base64 encoded and written to a file to be used by the
command line building code to share with qemu.

New API's from this patch:

  qemuDomainGetMasterKeyFilePath:
    Return a path to where the key is located

  qemuDomainWriteMasterKeyFile: (private)
    Open (create/trunc) the masterKey path and write the masterKey

  qemuDomainMasterKeyReadFile:
    Using the master key path, open/read the file, and store the
    masterKey and masterKeyLen. Expected use only from qemuProcessReconnect

  qemuDomainGenerateRandomKey: (private)
    Generate a random key using available algorithms

    The key is generated either from the gnutls_rnd function if it
    exists or a less cryptographically strong mechanism using
    virGenerateRandomBytes

   qemuDomainMasterKeyRemove:
    Remove traces of the master key, remove the *KeyFilePath

  qemuDomainMasterKeyCreate:
    Generate the domain master key and save the key in the location
    returned by qemuDomainGetMasterKeyFilePath.

    This API will first ensure the QEMU_CAPS_OBJECT_SECRET is set
    in the capabilities. If not, then there's no need to generate
    the secret or file.

The creation of the key will be attempted from qemuProcessPrepareHost
once the libDir directory structure exists.

The removal of the key will handled from qemuProcessStop just prior
to deleting the libDir tree.

Since the key will not be written out to the domain object XML file,
the qemuProcessReconnect will read the saved file and restore the
masterKey and masterKeyLen.

Using the existing virUUIDGenerateRandomBytes, move API to virrandom.c
rename it to virRandomBytes and add it to libvirt_private.syms.

This will be used as a fallback for generating a domain master key.

Add a capability bit for the qemu secret object.

Adjust the 2.6.0-1 caps/replies to add the secret object. For the
.replies it's take from the '{"execute":"qom-list-types"}' output.

When a hostdev is attached to the guest (and removed from the host),
the order of operations is call qemuHostdevPreparePCIDevices to remove
the device from the host, call qemuSetupHostdevCgroup to setup the cgroups,
and virSecurityManagerSetHostdevLabel to set the labels.

When the device is removed from the guest, the code didn't use the
reverse order leading to possible issues (especially if the path to
the device no longer exists). This patch will move the call to
qemuTeardownHostdevCgroup to prior to reattaching the device to
the host.

When a hostdev is attached to the guest (and removed from the host),
the order of operations is call qemuHostdevPreparePCIDevices to remove
the device from the host, call qemuSetupHostdevCgroup to setup the cgroups,
and virSecurityManagerSetHostdevLabel to set the labels.

When the device is removed from the guest, the code didn't use the
reverse order leading to possible issues (especially if the path to
the device no longer exists). This patch will move the call to
virSecurityManagerRestoreHostdevLabel to prior to reattaching the
device to the host.

to avoid the test failure

 7) Test driver "xen"  ... 2016-03-31 12:53:26.950+0000: 22430: debug : virDriverLoadModule:54 : Module load xen
 2016-03-31 12:53:26.950+0000: 22430: error : virDriverLoadModule:73 : failed to load module /build/libvirt-1.3.3~rc1/debian/build/src/.libs/libvirt_driver_xen.so /build/libvirt-1.3.3~rc1/debian/build/src/.libs/libvirt_driver_xen.so: undefined symbol: xlu_cfg_destroy
FAILED

There is a LIBVIRT_ADMIN_DEFAULT_URI environment variable
which is honored by virAdmConnectOpen and documented
in the virt-admin man page.

LIBVIRT_DEFAULT_ADMIN_URI is undocumented and this is its
only occurrence.

vshStrdup returns NULL without exiting on NULL input.

Postpone filling out the default connection in ctl->connname
after calling virshInit.

This allows printing help without a connection to the daemon.

The value is never negative thus there's no need to store it in a signed
type.

No need to extract the single element.

- docs/news.html.in libvirt.spec.in: update for release
- po/*.po*: regenerated

Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>

Commit id '3992ff14' added the prototype for networkGetActualType
with 1 parameter, but added 2 ATTRIBUTE_NONNULL's (assume from a
cut-n-paste), just remove (2).

Commit id '59e7ef3c' misapplied a merge of commit id '01924475'
to place the "-chardev" command after formatting the character
backend value.

Commit id 'e6944a52' misapplied a merge of commit id '01924475'
to place the "-chardev" command after formatting the character
backend value.

Commit id '3cdcc910' misapplied a merge of commit id '01924475'
to place the "-chardev" command after formatting the character
backend value.

Commit id '0e1e7ade' misapplied a merge of commit id '01924475'
to place the "-chardev" command after formatting the character
backend value.

Commit id '5ab86400' misapplied a merge of commit id '01924475'
to place the "-chardev" command after formatting the character
backend value.

Commit id '858bafeb' misapplied a merge of commit id '01924475'
to place the "-chardev" command after formatting the character
backend value.

Commit d77ffb68 added not only reporting of the PCI header type, but
also parsing of that information.  However, because there was no parsing
done for the other sub-PCI capabilities, if there was any other
capability then a valid header type name (like phys_function or
virt_functions) the parsing would fail.  This prevented passing node
device XMLs that we generated into our own functions when dealing with,
e.g. with SRIOV cards.

Instead of reworking the whole parsing, just fix this one occurence and
remove a test for it for the time being.  Future patches will deal with
the rest.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Starting with commit f8e712fe, if you start a domain that has an
<interface type='hostdev' (or that has <interface type='network'>
where the network is a pool of devices for hostdev assignment), when
you later try to add *another* interface (of any kind) with hotplug,
the function qemuAssignDeviceNetAlias() fails as soon as it sees a
"hostdevN" alias in the list of interfaces), causing the attach to
fail.

This is because (starting with f8e712fe) the device alias names are
assigned during the new function qemuProcessPrepareDomain(), which is
called *before* networkAllocateActualDevice() (which is called from
qemuProcessPrepareHost(), which is called from
qemuProcessLaunch()). Prior to that commit,
networkAllocateActualDevice() was called first.

The problem with this is that the alias for interfaces that are really
a hostdev (<interface type='hostdev'>) is of the form "hostdevN" (just
like other hostdevs), while other interfaces are "netN". But if you
don't know that the interface is going to be a hostdev at the time you
assign the alias name, you can't name it differently. (As far as I've
seen so far, the change in name by itself wouldn't have been a problem
(other than just an outwardly noticeable change in behavior) except
for the abovementioned failure to attach/detach new interfaces.

Rather than take the chance that there may be other not-yet-revealed
problems associated with changing the alias name, this patch changes
the way that aliases are assigned to restore the old behavior.

Old: In the past, assigning an alias to an interface was skipped if it
was seen that the interface was type='hostdev' - we knew that the
hostdev part of the interface was also in the list of hostdevs (that's
part of what happens in networkAllocateActualDevice()) and it would be
assigned when all the other hostdev aliases were assigned.

New: When assigning an alias to an interface, we haven't yet called
networkAllocateActualDevice() to construct the hostdev part of the
interface, so we can't just wait for the loop that creates aliases for
all the hostdevs (there's nothing on that list for this device
yet!). Instead we handle it immediately in the loop creating interface
aliases, by calling the new function networkGetActualType() to
determine if it is going to be hostdev, and if so calling
qemuAssignDeviceHostdevAlias() instead.

Some adjustments have to be made to both
qemuAssignDeviceHostdevAlias() and to qemuAssignDeviceNetAlias() to
accommodate this. In both of them, an error return from
qemuDomainDeviceAliasIndex() is no longer considered an error; instead
it's just ignored (because it almost certainly means that the alias
string for the device was "net" when we expected "hostdev" or vice
versa). in qemuAssignDeviceHostdevAlias() we have to look at all
interface aliases for hostdevN in addition to looking at all hostdev
aliases (this wasn't necessary in the past, because both the interface
entry and the hostdev entry for the device already pointed at the
device info; no longer the case since the hostdev entry hasn't yet
been setup).

Fortunately the buggy behavior hasn't yet been in any official release
of libvirt.

In certain cases, we need to assign a hostdevN-style alias in a case
when we don't have a virDomainHostdevDefPtr (instead we have a
virDomainNetDefPtr). Since qemuAssignDeviceHostdevAlias() doesn't use
anything in the virDomainHostdevDef except the alias string itself
anyway, this patch just changes the arguments to pass a pointer to the
alias pointer instead.

There are times when it's necessary to learn the actual type of a
network connection before any resources have been allocated
(e.g. during qemuProcessPrepareDomain()), but in the past it was
necessary to call networkAllocateActualDevice() in order to have the
actual type filled in.

This new function returns the type of network that *will be* setup
once it actually happens, but without making any changes on the host.

The paths have the domain ID in them.  Without cleaning them, they would
contain the same ID even after multiple restarts.  That could cause
various problems, e.g. with access.

Add function qemuDomainClearPrivatePaths() for this as a counterpart of
qemuDomainSetPrivatePaths().
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Since commit 9dca74ee, the function can take driver and a vm, no
need to overcomplicate.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

The directory name changed in a89f05ba.

This unbreaks launching QEMU/KVM VMs with apparmor enabled. It also adds
the directory for the qemu guest-agent socket which is not known when
parsing the domain XML.

This reverts commit ee4cfb56.

Since we're still not persisting our bookkeeping lists across
daemon restarts, we might have lost some information
virPCIDeviceReattach() relies on, for example whether the
device needs to be unbound from the stub driver.

As a result, if the daemon has been restarted in the meantime,
the device might end up remaining bound to the stub driver even
after 'virsh nodedev-reattach' or similar has been called, with
no way of giving it back to the host short of messing with
sysfs behind libvirt's back.

Revert back to the previous behavior of always trying to bind
the device to the host driver, regardless of its status when it
was detached, until persistent bookkeeping lists have been
implemented.

According to MDN[1], 'margin-left' and similar CSS properties,
including 'margin-right', cannot be applied to the '::first-line'
pseudo-element, so this rule will never have any effect and can
be safely removed.

[1] https://developer.mozilla.org/en/docs/Web/CSS/::first-line

Commit e14c5069 dropped the only user of the 'sponsor'
CSS id, so we can drop it from the stylesheet as well.

When using the --start option, the show_count should not be set to
max_id as the --start <cpu> means we dont need those many initial cpu
stats. Hence, show_count should be adjusted accordingly.

https://bugzilla.redhat.com/show_bug.cgi?id=1249441Signed-off-by: NNitesh Konkar <nitkon12@linux.vnet.ibm.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Commit 08cc14f7 moved the conversion of MiB/s to B/s out of the
qemuMonitor APIs, but forgot to adjust the qemuMigrationDriveMirror
caller.

This patch will convert the migrate_speed value from MiB/s to its
mirror_speed equivalent in bytes/s.
Signed-off-by: NRudy Zhang <rudyflyzhang@gmail.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

@flags have a valid modification impact only after calling
virDomainObjUpdateModificationImpact. virDomainObjGetOneDef calls it but
doesn't update them in the caller.

Chunyan sent a nice cleanup patch for libxlDomainDetachNetDevice

https://www.redhat.com/archives/libvir-list/2016-March/msg00926.html

which I incorrectly modified before pushing as commit b5534e53. My
modification caused network devices of type hostdev to no longer
be removed. This patch changes b5534e53 to resemble Chunyan's
original, correct patch.

Chunyan sent a correct patch to fix a resource leak on error in
libxlDomainAttachNetDevice

https://www.redhat.com/archives/libvir-list/2016-March/msg00924.html

I made what was thought to be an improvement and pushed the patch as
commit e6336442. As it turns out, my change broke adding net devices
that are actually hostdevs to the list of nets in virDomainDef. This
patch changes e6336442 to resemble Chunyan's original, correct
patch.