This hides the unused third parameter from every line
and prepares for resetting the environment after each test
case in the future.

All existing Haswell CPUID data were gathered from CPUs with broken TSX.
Let's add new data for Haswell with correct TSX implementation.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

All Intel Haswell processors (except Xeon E7 v3 with stepping >= 4) have
TSX disabled by microcode update. As not all CPUs are guaranteed to be
patched with microcode updates we need to explicitly disable TSX on
affected CPUs to avoid its accidental usage.

https://bugzilla.redhat.com/show_bug.cgi?id=1406791Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The original test didn't use family/model numbers to make better
decisions about the CPU model and thus mis-detected the model in the two
cases which are modified in this commit. The detected CPU models now
match those obtained from raw CPUID data.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Converted by running the following command, renaming the files as
*.new, and committing only the *.new files.

    (cd tests/cputestdata; ./cpu-convert.py *.json)
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Instantiating "host" CPU and querying it using qom-get has been the only
way of probing host CPU via QEMU until 2.9.0 implemented
query-cpu-model-expansion for x86_64. Even though libvirt never really
used the old way its result can be easily converted into the one
produced by query-cpu-model-expansion. Thus we can reuse the original
test data and possible get new data from hosts where QEMU does not
support the new QMP command.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The static CPU model expansion is designed to return only canonical
names of all CPU properties. To maintain backwards compatibility libvirt
is stuck with different spelling of some of the features, but we need to
use the full expansion to get the additional spellings. In addition to
returning all spelling variants for all properties the full expansion
will contain properties which are not guaranteed to be migration
compatible. Thus, we need to combine both expansions. First we need to
call the static expansion to limit the result to migratable properties.
Then we can use the result of the static expansion as an input to the
full expansion to get both canonical names and their aliases.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Until now host-model CPU mode tried to enable all CPU features supported
by the host CPU even if QEMU/KVM did not support them. This caused a
number of issues and made host-model quite unreliable. Asking QEMU for
the CPU it can provide and the current host makes host-model much more
robust.

This commit fixes the following bugs:

    https://bugzilla.redhat.com/show_bug.cgi?id=1018251
    https://bugzilla.redhat.com/show_bug.cgi?id=1371617
    https://bugzilla.redhat.com/show_bug.cgi?id=1372581
    https://bugzilla.redhat.com/show_bug.cgi?id=1404627
    https://bugzilla.redhat.com/show_bug.cgi?id=870071

In addition to that, the following bug should be mostly limited to cases
when an unsupported feature is explicitly requested:

    https://bugzilla.redhat.com/show_bug.cgi?id=1335534Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Querying "host" CPU model expansion only makes sense for KVM. QEMU 2.9.0
introduces a new "max" CPU model which can be used to ask QEMU what the
best CPU it can provide to a TCG domain is.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

While query-cpu-model-expansion returns only boolean features on s390,
but x86_64 reports some integer and string properties which we are
interested in.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The element will be generalized in the following commits.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

While reviewing a patch from Andrea that modified this test case, I
realized that although it was "properly failing" (it's a negative
test), that it was failing for the wrong reason (the MULTIFUNCTION cap
wasn't set in the test case, so it was saying that multifunction=on
wasn't supported by the QEMU binary; instead it should have been
complaining that it had run out of PCI slots of the appropriate type
and couldn't automatically add any more).

This improper failure had started when I added the patch to
automatically aggregate pcie-root-ports onto multiple functions of
each pcie-root slot, but I hadn't noticed it because the test still
failed.

This patch corrects the test case to 1) set the MULTIFUNCTION flag in
the caps, and 2) attempt to add 241 pcie-root-ports to a domain. Since
there are 30 slots available on a pcie-root (slot 0 is reserved, and
slot 31 is used by the integrated SATA controller), and a
pcie-root-port can only be placed on a function of a slot on
pcie-root, the maximum number of pcie-root-ports in any domain is 240.

virQEMUCapsHasPCIMultiBus() performs a version check on
the QEMU binary to figure out whether multiple buses are
supported, so to get the correct aliases assigned when
dealing with pSeries guests we need to spoof the version
accordingly in the test suite.

Due to the extra architecture-specific logic, it's already
necessary for users to call virQEMUCapsHasPCIMultiBus(),
so the capability itself is just a pointless distraction.

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

While "x86" is a CPU sub driver name, it is not a recognized name of any
architecture known to libvirt. Let's use "x86_64" prefix which can be
used with virArch APIs.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The new API is called virCPUDataFree. Individual CPU drivers are no
longer required to implement their own freeing function unless they need
to free architecture specific data from virCPUData.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Our documentation of the domain capabilities XML says that the fallback
attribute of a CPU model is used to indicate whether the CPU model was
detected by libvirt itself (fallback="allow") or by asking the
hypervisor (fallback="forbid"). We need to properly set
fallback="forbid" when CPU model comes from QEMU to match the
documentation.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1352529Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Now that QEMU_CAPS_DEVICE_PCI_BRIDGE is no longer checked
unless a pci-bridge is really part of the configuration,
and most uses of the legacy PCI controller combo have been
dropped from tests that use PCIe machine types, we can
drop the corresponding capabilities from a lot of test
cases.

In some cases, only one of the two transformations was
checked; in other cases, the capabilities set differed.

Up until a while ago, libvirt would automatically add a legacy
PCI controllers combo (dmi-to-pci-bridge + pci-bridge) to any
PCIe machine type (x86_64/q35 and aarch64/virt).

As a result, a number of input and output files in the test
suite ended up containing the legacy PCI controllers, even
though they are not needed or in any way relevant to the
feature being tested.

Get rid of most of the occurrences. Most of the time, this
just means removing the controllers from the input file and
regenerating the output files; in a few instances, some
minor tweaking is performed on the input file, most notably
removing the memory balloon: as memory balloon support was
not the scope of the test being changed, there is no loss
of test coverage from doing so.

Several occurrences of the legacy PCI controllers remain in
the test suite, both because removing their usage would have
required even more tweaking, and because we still want to
have coverage of this perfectly valid combination.

The 'raw' block driver in Qemu is not directly interesting from
libvirt's perspective, but it can be layered above some other block
drivers and this may be interesting for the user.

The patch adds support for the 'raw' block driver. The driver is treated
simply as a pass-through and child driver in JSON is queried to get the
necessary information.
Signed-off-by: NTomáš Golembiovský <tgolembi@redhat.com>

Add a new storage driver registration function that will force the
backend code to fail if any of the storage backend modules can't be
loaded. This will make sure that they work and are present.

If driver modules are enabled turn storage driver backends into
dynamically loadable objects. This will allow greater modularity for
binary distributions, where heavyweight dependencies as rbd and gluster
can be avoided by selecting only a subset of drivers if the rest is not
necessary.

The storage modules are installed into 'LIBDIR/libvirt/storage-backend/'
and users can override the location by using
'LIBVIRT_STORAGE_BACKEND_DIR' environment variable.

rpm based distros will at this point install all the backends when
libvirt-daemon-driver-storage package is installed.

Test that the vcpu entity selection code works properly

Add APIs that allow to dynamically register driver backends so that the
list of available drivers does not need to be known during compile time.

This will allow us to modularize the storage driver on runtime.

Pass the registration function name to virDriverLoadModule so that we
can later call specific functions if necessary (e.g. for testing
purposes). This gets rid of the rather ugly automatic name generator and
unifies the code to load/initialize the modules.

It's also clear which registration function gets called.

Refactors of the test resulted into the second argument of the 'TEST'
macro to be unused. Drop them.

The XML2XML test should work properly even if the storage backend is
disabled, since it does not use it.

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

QEMU 2.9.0 is not released yet but it's close to its release and
we need this data to implement new features that will be in
that release.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

The old data was generated from not released QEMU.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Add a test that allows providing the parent fabric_wwn in the input XML
in order to create the vHBA.

This also fixes a mixed setting of the fabric_wwn field from the read
test driver XML strings.