This patch adds the ability to make the filesystem for a filesystem
pool during a pool build.

The patch adds two new flags, no overwrite and overwrite, to control
when mkfs gets executed.  By default, the patch preserves the
current behavior, i.e., if no flags are specified, pool build on a
filesystem pool only makes the directory on which the filesystem
will be mounted.

If the no overwrite flag is specified, the target device is checked
to determine if a filesystem of the type specified in the pool is
present.  If a filesystem of that type is already present, mkfs is
not executed and the build call returns an error.  Otherwise, mkfs
is executed and any data present on the device is overwritten.

If the overwrite flag is specified, mkfs is always executed, and any
existing data on the target device is overwritten unconditionally.

Domain listing, basic information retrieval and domain life cycle
management is implemented. But currently the domain XML output
lacks the complete devices section.

The driver uses OpenWSMAN to directly communicate with a Hyper-V
server over its WS-Management interface exposed via Microsoft WinRM.

The driver is based on the work of Michael Sievers. This started in
the same master program project group at the University of Paderborn
as the ESX driver.

See Michael's blog for details: http://hyperv4libvirt.wordpress.com/

Add a generator script to generate the structs and serialization
information for OpenWSMAN.

openwsman.h collects workarounds for problems in OpenWSMAN <= 2.2.6.
There are also disabled sections that would use ws_serializer_free_mem
but can't because it's broken in OpenWSMAN <= 2.2.6. Patches to fix
this have been posted upstream.

This patch moves some of the sriov related pci code from node_device driver
to src/util/pci.[ch]. Some functions had to go thru name and argument list
change to accommodate the move.
Signed-off-by: NRoopa Prabhu <roprabhu@cisco.com>
Signed-off-by: NChristian Benvenuti <benve@cisco.com>
Signed-off-by: NDavid Wang <dwang2@cisco.com>

The functions for manipulating pidfiles are in util/util.{c,h}.
We will shortly be adding some further pidfile related functions.
To avoid further growing util.c, this moves the pidfile related
functions into a dedicated virpidfile.{c,h}. The functions are
also all renamed to have 'virPidFile' as their name prefix

* util/util.h, util/util.c: Remove all pidfile code
* util/virpidfile.c, util/virpidfile.h: Add new APIs for pidfile
  handling.
* lxc/lxc_controller.c, lxc/lxc_driver.c, network/bridge_driver.c,
  qemu/qemu_process.c: Add virpidfile.h include and adapt for API
  renames

Without this, cygwin failed to compile:

In file included from ../src/rpc/virnetmessage.h:24,
                 from ../src/rpc/virnetclient.h:27,
                 from remote/remote_driver.c:31:
../src/rpc/virnetprotocol.h:9:21: error: rpc/rpc.h: No such file or directory

With that fixed, compilation warned:

rpc/virnetsocket.c: In function 'virNetSocketNewListenUNIX':
rpc/virnetsocket.c:347: warning: format '%d' expects type 'int', but argument 8 has type 'gid_t' [-Wformat]
rpc/virnetsocket.c: In function 'virNetSocketGetLocalIdentity':
rpc/virnetsocket.c:743: warning: pointer targets in passing argument 5 of 'getsockopt' differ in signedness

* src/Makefile.am (libvirt_driver_remote_la_CFLAGS)
(libvirt_net_rpc_client_la_CFLAGS)
(libvirt_net_rpc_server_la_CFLAGS): Include XDR_CFLAGS, for rpc
headers on cygwin.
* src/rpc/virnetsocket.c (virNetSocketNewListenUNIX)
(virNetSocketGetLocalIdentity): Avoid compiler warnings.

Gettext annoyingly modifies CPPFLAGS in-place, putting
-I/usr/local/include into the search patch if libintl headers
must be used from that location.  But since we must support
automake 1.9.6 which lacks AM_CPPFLAGS, and since CPPFLAGS is used
prior to INCLUDES, this means that the build picks up the _old_
installed libvirt.h in priority to the in-tree version, leading
to all sorts of weird build failures on FreeBSD.

Fix this by teaching configure to undo gettext's actions, but
to keep any changes required by gettext at the end of INCLUDES
after all in-tree locations are used first.  Also requires
adding a wrapper Makefile.am and making gnulib-tool create
just gnulib.mk files during the bootstrap process.
Signed-off-by: NEric Blake <eblake@redhat.com>

I went with the shorter license notice used by src/libvirt.c,
rather than spelling out the full LGPLv2+ clause into each of
these files.

* configure.ac: Declare copyright.
* all Makefile.am: Likewise.

The sanlock plugin for libvirt expects the directory
/var/lib/libvirt/sanlock to exist. Create this and add
it to the RPM

* libvirt.spec.in: Add /var/lib/libvirt/sanlock
* src/Makefile.am: Create /var/lib/libvirt/sanlock

Also prepend $(AM_V_GEN) to the command line, mark virkeycode-mapgen.py
as executable and switch the shebang line from /bin/python to the
commonly use /usr/bin/python.

In preparation for a future patch adding new virFile APIs.

* src/util/files.h, src/util/files.c: Move...
* src/util/virfile.h, src/util/virfile.c: ...here, and rename
functions to virFile prefix.  Macro names are intentionally
left alone.
* *.c: All '#include "files.h"' uses changed.
* src/Makefile.am (UTIL_SOURCES): Reflect rename.
* cfg.mk (exclude_file_name_regexp--sc_prohibit_close): Likewise.
* src/libvirt_private.syms: Likewise.
* docs/hacking.html.in: Likewise.
* HACKING: Regenerate.

The only 'void name(void)' style procedure in the protocol is 'close' that
is handled special, but also programming errors like a missing _args or
_ret suffix on the structs in the .x files can create such a situation by
accident. Making the generator aware of this avoids bogus errors from the
generator such as:

  Use of uninitialized value in exists at ./rpc/gendispatch.pl line 967.

Also this allows to get rid of the -c option and the special case code for
the 'close' procedure, as the generator handles it now correctly.

Reported by Michal Privoznik

Add virtkey lib for usage-improvment and keycode translating.
Add 4 internal API for the aim

const char *virKeycodeSetTypeToString(int codeset);
int virKeycodeSetTypeFromString(const char *name);
int virKeycodeValueFromString(virKeycodeSet codeset, const char *keyname);
int virKeycodeValueTranslate(virKeycodeSet from_codeset,
                             virKeycodeSet to_offset,
                             int key_value);

* include/libvirt/libvirt.h.in: extend virKeycodeSet enum
* src/Makefile.am: add new virtkeycode module and rule to generate
  virkeymaps.h
* src/util/virkeycode.c src/util/virkeycode.h: new module
* src/util/virkeycode-mapgen.py: python generator for virkeymaps.h
  out of keymaps.csv
* src/libvirt_private.syms: extend private symbols for new module
* .gitignore: add generated virkeymaps.h

Should keep it as the same as:
http://git.gnome.org/browse/gtk-vnc/commit/src/keymaps.csv

All master  keymaps are defined in a CSV file. THis covers
Linux keycodes, OSX keycodes, AT set1, 2 & 3, XT keycodes,
the XT encoding used by the Linux KBD driver, USB keycodes,
Win32 keycodes, the XT encoding used by Xorg on Cygwin,
the XT encoding used by Xorg on Linux with kbd driver.

* src/Makefile.am: added to EXTRA_DIST
* src/util/keymaps.csv: new file

The current API build scripts will continue and exit with a zero
status even if they find problems. This has been the cause of many
build problems, or hidden build errors, in the past. Change the
scripts so they always exit with a non-zero status for any problems
they do not understand. Also turn off all debug output by default
so they respect $(AM_V_GEN)

* docs/Makefile.am: Use $(AM_V_GEN) for API/HTML scripts
* docs/apibuild.py, python/generator.py: Exit with non-zero status
  if problems are found. Also be silent, not outputting any debug
  messages.
* src/Makefile.am: Use $(AM_V_GEN) for ESX generator
* python/Makefile.am: Tweak rule

$@ already included $(srcdir)

As long as we guarantee RPC struct layout stability, we might as
well also guarantee RPC enum value constancy.

* src/Makefile.am (r1, r2, PDWTAGS): Adjust rule to pick up named
and anonymous enums.
* src/remote_protocol-structs: Add enum values.
* src/qemu_protocol-structs: Likewise.
* src/virnetprotocol-structs: Likewise.

Similar to the recent qemu_protocol-structs addition.

* src/virnetprotocol-structs: New file.
* src/Makefile.am (%_protocol-structs): Factor body...
(PDWTAGS): ...into new helper macro.
(virnetprotocol-structs): New rule.
(PROTOCOL_STRUCTS): Add virnetprotocol-structs.

The LXC and UML drivers can both make use of auditing. Move
the qemu_audit.{c,h} files to src/conf/domain_audit.{c,h}

* src/conf/domain_audit.c: Rename from src/qemu/qemu_audit.c
* src/conf/domain_audit.h: Rename from src/qemu/qemu_audit.h
* src/Makefile.am: Remove qemu_audit.{c,h}, add domain_audit.{c,h}
* src/qemu/qemu_audit.h, src/qemu/qemu_cgroup.c,
  src/qemu/qemu_command.c, src/qemu/qemu_driver.c,
  src/qemu/qemu_hotplug.c, src/qemu/qemu_migration.c,
  src/qemu/qemu_process.c: Update for changed audit API names

V2: Remove policy kit references from virNetServer and use DBus APIs
    directly, if available.

* src/util/virtaudit.[ch]: Rename...
* src/util/viraudit.[ch]: ...to match virAudit* API.
* src/Makefile.am (UTIL_SOURCES): Reflect rename.
* daemon/libvirtd.c: Likewise.
* po/POTFILES.in: Likewise.
* src/libvirt_private.syms: Likewise.
* src/qemu/qemu_audit.c: Likewise.

Since we are going to add some libvirt-qemu.so entry points in
0.9.4, we might as well start checking for RPC stability, just
as for libvirt.so.

* src/Makefile.am (PROTOCOL_STRUCTS): New variable.
(remote_protocol-structs): Rename...
(%_protocol-structs): ...and make more generic.
* src/qemu_protocol-structs: New file.

According to the automake manual, CPPFLAGS (aka INCLUDES, as spelled
in automake 1.9.6) should only include -I, -D, and -U directives; more
generic directives like -Wall belong in CFLAGS since they affect more
phases of the build process.  Therefore, we should be sticking CFLAGS
additions into a CFLAGS container, not a CPPFLAGS container.

* src/Makefile.am (libvirt_driver_vmware_la_CFLAGS): Use AM_CFLAGS.
(INCLUDES): Move CFLAGS items...
(AM_CFLAGS): ...to their proper location.
* python/Makefile.am (INCLUDES, AM_CFLAGS): Likewise.
* tests/Makefile.am (INCLUDES, AM_CFLAGS): Likewise.
(commandtest_CFLAGS, commandhelper_CFLAGS)
(virnetmessagetest_CFLAGS, virnetsockettest_CFLAGS): Use AM_CFLAGS.

EXTRA_DIST files should unconditionally be part of the tarball,
rather than depending on the presence of sanlock-devel.

Meanwhile, parallel builds could fail if we don't use mkdir -p.

* src/Makefile.am (EXTRA_DIST): Always ship sanlock .aug and
template .conf files.
(%-sanlock.conf): Use MKDIR_P.

None of these instances cause any semantic differences, but
consistency is nice.

* src/Makefile.am: Replace leading spaces with tabs.

Introduce a configuration file with a single parameter
'require_lease_for_disks', which is used to decide whether
it is allowed to start a guest which has read/write disks,
but without any leases.

* libvirt.spec.in: Add sanlock config file and augeas
  lens
* src/Makefile.am: Install sanlock config file and
  augeas lens
* src/locking/libvirt_sanlock.aug: Augeas master lens
* src/locking/test_libvirt_sanlock.aug: Augeas test file
* src/locking/sanlock.conf: Example sanlock config
* src/locking/lock_driver_sanlock.c: Wire up loading
  of configuration file

This guts the current remote driver, removing all its networking
handling code. Instead it calls out to the new virClientPtr and
virClientProgramPtr APIs for all RPC & networking work.

* src/Makefile.am: Link remote driver with generic RPC code
* src/remote/remote_driver.c: Gut code, replacing with RPC
  API calls
* src/rpc/gendispatch.pl: Update for changes in the way
  streams are handled

* src/Makefile.am: Add XDR_CFLAGS

The build currently fails when trying to create virnetprotocol.c
into $(builddir)/rpc, which doesn't exist.  But since the file
is part of the tarball, it should be generated into $(srcdir).
Caught by autobuild.sh.

* src/Makefile.am (VIR_NET_RPC_GENERATED): Generate into srcdir.

The dnsmasq commandline was being built as a part of running
dnsmasq. This patch puts the commandline build into a separate
function (and exports it as a private API) making it possible to build
a dnsmasq commandline without executing it, so that we can write a
test program to verify that the proper commandlines are being created.
Signed-off-by: NMichal Novotny <minovotn@redhat.com>

To ensure virnetprotocol.[ch] are generated before any other
files, add them to BUILT_SOURCES and MAINTAINERCLEANFILES.
At the same time, move ESX_DRIVER_GENERATED out of DISTCLEAN
and into MAINTAINERCLEANFILES, since they are included in
EXTRA_DIST

* src/Makefile.am: Add virnetprotocol.[ch] to BUILT_SOURCES

The Makefile.am rules for generating RPC protocol had a couple
of bugs

 - A instance of remote/rpcgen_fix.pl  was not changed
   to rpc/genprotocol.pl
 - A dep from rpc/virnetmessage.h on the generated
   rpc/virnetprotocol.h was missing
 - The generated rpc/virnetprotocol.[ch] were not listed
   in MAINTAINERCLEANFILES

* Makefile.am: Fix RPC protocol generation

Move the daemon/remote_generator.pl to src/rpc/gendispatch.pl
and move the src/remote/rpcgen_fix.pl to src/rpc/genprotocol.pl

* daemon/Makefile.am: Update for new name/location of generator
* src/Makefile.am: Update for new name/location of generator

To facilitate creation of new clients using XDR RPC services,
pull alot of the remote driver code into a set of reusable
objects.

 - virNetClient: Encapsulates a socket connection to a
   remote RPC server. Handles all the network I/O for
   reading/writing RPC messages. Delegates RPC encoding
   and decoding to the registered programs

 - virNetClientProgram: Handles processing and dispatch
   of RPC messages for a single RPC (program,version).
   A program can register to receive async events
   from a client

 - virNetClientStream: Handles generic I/O stream
   integration to RPC layer

Each new client program now merely needs to define the list of
RPC procedures & events it wants and their handlers. It does
not need to deal with any of the network I/O functionality at
all.

Allow RPC servers to advertise themselves using MDNS,
via Avahi

* src/rpc/virnetserver.c, src/rpc/virnetserver.h: Allow
  registration of MDNS services via avahi
* src/rpc/virnetserverservice.c, src/rpc/virnetserverservice.h: Add
  API to fetch the listen port number
* src/rpc/virnetsocket.c, src/rpc/virnetsocket.h: Add API to
  fetch the local port number
* src/rpc/virnetservermdns.c, src/rpc/virnetservermdns.h: Represent
  an MDNS advertisement

To facilitate creation of new daemons providing XDR RPC services,
pull a lot of the libvirtd daemon code into a set of reusable
objects.

 * virNetServer: A server contains one or more services which
   accept incoming clients. It maintains the list of active
   clients. It has a list of RPC programs which can be used
   by clients. When clients produce a complete RPC message,
   the server passes this onto the corresponding program for
   handling, and queues any response back with the client.

 * virNetServerClient: Encapsulates a single client connection.
   All I/O for the client is handled, reading & writing RPC
   messages.

 * virNetServerProgram: Handles processing and dispatch of
   RPC method calls for a single RPC (program,version).
   Multiple programs can be registered with the server.

 * virNetServerService: Encapsulates socket(s) listening for
   new connections. Each service listens on a single host/port,
   but may have multiple sockets if on a dual IPv4/6 host.

Each new daemon now merely has to define the list of RPC procedures
& their handlers. It does not need to deal with any network related
functionality at all.

This provides two modules for handling SASL

 * virNetSASLContext provides the process-wide state, currently
   just a whitelist of usernames on the server and a one time
   library init call

 * virNetTLSSession provides the per-connection state, ie the
   SASL session itself. This also include APIs for providing
   data encryption/decryption once the session is established

* src/Makefile.am: Add to libvirt-net-rpc.la
* src/rpc/virnetsaslcontext.c, src/rpc/virnetsaslcontext.h: Generic
  SASL handling code

This provides two modules for handling TLS

 * virNetTLSContext provides the process-wide state, in particular
   all the x509 credentials, DH params and x509 whitelists
 * virNetTLSSession provides the per-connection state, ie the
   TLS session itself.

The virNetTLSContext provides APIs for validating a TLS session's
x509 credentials. The virNetTLSSession includes APIs for performing
the initial TLS handshake and sending/recving encrypted data

* src/Makefile.am: Add to libvirt-net-rpc.la
* src/rpc/virnettlscontext.c, src/rpc/virnettlscontext.h: Generic
  TLS handling code