This is a helper function to print vcpu pin info.

Introduce 2 APIs to support emulator threads in remote driver.
    1) remoteDomainPinEmulator: call driver api, such as qemudDomainPinEmulator.
    2) remoteDomainGetEmulatorPinInfo: call driver api, such as qemudDomainGetEmulatorPinInfo.
They are similar to remoteDomainPinVcpuFlags and remoteDomainGetVcpuPinInfo.
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>

Introduce 2 APIs to support emulator threads pin in qemu driver.

    1) qemudDomainPinEmulator: setup emulator threads pin info.
    2) qemudDomainGetEmulatorPinInfo: get all emulator threads pin info.

They are similar to qemudDomainPinVcpuFlags and qemudDomainGetVcpuPinInfo.
And also, remoteDispatchDomainPinEmulatorFlags and remoteDispatchDomainGetEmulatorPinInfo
functions are introduced.
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>

Introduce 2 APIs to support emulator threads pin.
    1) virDomainEmulatorPinAdd: setup emulator threads pin with a given cpumap string.
    2) virDomainEmulatorPinDel: remove all emulator threads pin.
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>

Introduce 2 APIs to set/get physical cpu pinning info of emulator threads.
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>

Emulator threads should also be pinned by sched_setaffinity(), just
the same as vcpu threads.
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>

Introduce qemuSetupCgroupEmulatorPin() function to add emulator
threads pin info to cpuset cgroup, the same as vcpupin.
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>

This patch adds a new xml element <emulatorpin>, which is a sibling
to the existing <vcpupin> element under the <cputune>, to pin emulator
threads to specified physical CPUs.
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>

vcpu threads pin are implemented using sched_setaffinity(), but
not controlled by cgroup. This patch does the following things:

    1) enable cpuset cgroup
    2) reflect all the vcpu threads pin info to cgroup
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>

1. add a new function virDomainVcpuPinDefCopy
2. make virDomainVcpuPinDefFree non-static

Create a new cgroup and move all emulator threads to the new cgroup.
And then we can do the other things:
1. limit only vcpu usage rather than the whole qemu
2. limit for emulator threads(include vhost-net threads)
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>

Introduce a new API to move tasks of one controller from a cgroup to another cgroup
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>

Introduce the function virCgroupForEmulator() to create sub directory
for simulator thread(include I/O thread, vhost-net thread)
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>

Since the move to systemd libvirt-guests doesn't output this progress
information anymore. This patch brings back this feature.

It is helpful to show the admin what the system is waiting for and what
is left of the timeout (e.g. for calibrating the shutdown timing of a ups).

Rewriting the current line with \r doesn't work anymore in the context
of systemd. So always write new lines, but move to 5 second intervals
to avoid flooding the console.

Qemu command line generation for geometry override and testcases.
Signed-off-by: NJ.B. Joret <jb@linux.vnet.ibm.com>
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

A hypervisor may allow to override the disk geometry of drives.
Qemu, as an example with cyls=,heads=,secs=[,trans=].
This patch extends the domain config to allow the specification of
disk geometry with libvirt.
Signed-off-by: NJ.B. Joret <jb@linux.vnet.ibm.com>
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

Older automake 1.9.6 (hello there, RHEL 5) did not populate
$(builddir), which meant 'make check' failed with:

make[3]: *** No rule to make target `/.libs/libvirt.la', needed by `check-symfile'.  Stop.

For that matter, even newer automake doesn't directly emit rules
to build .libs/libvirt.la; we are better off basing our rules
on the public ./libvirt.la.

* src/Makefile.am (check-symfile): Delete useless variable.

Without this patch, RHEL 5 fails to compile, since the dbus
files lives under /usr/include/dbus-1.0/dbus/dbus.h, and
DBUS_CFLAGS contains -I/usr/include/dbus-1.0.

In file included from network/bridge_driver.c:67:
../src/util/virdbus.h:26:25: error: dbus/dbus.h: No such file or directory

* src/Makefile.am (libvirt_driver_network_impl_la_CFLAGS): Add
DBUS_CFLAGS.

When gcc atomic intrinsics are not available (such as on RHEL 5
with gcc 4.1.2), we were getting link errors due to multiple
definitions:

./.libs/libvirt_util.a(libvirt_util_la-virobject.o): In function `virAtomicIntXor':
/home/dummy/l,ibvirt/src/util/viratomoic.h:404: multiple definition of `virAtomicIntXor'
./.libs/libvirt_util.a(libvirt_util_la-viratomic.o):/home/dummy/libvirt/src/util/viratomic.h:404: first defined here

Solve this by conditionally marking the functions static (the
condition avoids falling foul of gcc warnings about unused
static function declarations).

* src/util/viratomic.h: When not using gcc intrinsics, use static
functions to avoid linker errors on duplicate functions.

Building on RHEL 5 warned:

nodeinfo.c: 305: warning: implicit declaration of function 'CPU_COUNT'

This extension macro in <sched.h> was not added until later glibc.

* src/nodeinfo.c (CPU_COUNT): Add fallback implementation.

We already skip out on building the LXC under RHEL 5, because the
kernel is too old (commits 4c18acff, 2dee8965); but commit 9612e4b2
moved some LXC-only code into common files, resulting in this
build failure:

util/virfile.c: In function 'virFileLoopDeviceAssociate':
util/virfile.c:580: error: 'LO_FLAGS_AUTOCLEAR' undeclared (first use in this function)

Unfortunately, the kernel folks only made it an enum, rather than
also a #define, so we have to modify configure.ac to record when
it is usable.

* configure.ac (with_lxc): Mark when LO_FLAGS_AUTOCLEAR was found.
* src/util/virfile.c (virFileLoopDeviceAssociate): Avoid
compilation when kernel is too old.

Fix possible double close in the child process after the fork in case
infd and outfd are equal, just like they are after being called from
virNetSocketNewConnectCommand.

This patch provides basic support for using firewalld's firewall-cmd
rather than then plain eb/ip(6)tables commands.

* configure.ac, spec file: firewalld defaults to enabled if dbus is
  available, otherwise is disabled. If --with_firewalld is explicitly
  requested and dbus is not available, configure will fail.

* bridge_driver: add dbus filters to get the FirewallD1.Reloaded
  signal and DBus.NameOwnerChanged on org.fedoraproject.FirewallD1.
  When these are encountered, reload all the iptables reuls of all
  libvirt's virtual networks (similar to what happens when libvirtd is
  restarted).

* iptables, ebtables: use firewall-cmd's direct passthrough interface
  when available, otherwise use iptables and ebtables commands. This
  decision is made once the first time libvirt calls
  iptables/ebtables, and that decision is maintained for the life of
  libvirtd.

* Note that the nwfilter part of this patch was separated out into
  another patch by Stefan in V2, so that needs to be revised and
  re-reviewed as well.

================

All the configure.ac and specfile changes are unchanged from Thomas'
V3.

V3 re-ran "firewall-cmd --state" every time a new rule was added,
which was extremely inefficient.  V4 uses VIR_ONCE_GLOBAL_INIT to set
up a one-time initialization function.

The VIR_ONCE_GLOBAL_INIT(x) macro references a static function called
vir(Ip|Eb)OnceInit(), which will then be called the first time that
the static function vir(Ip|Eb)TablesInitialize() is called (that
function is defined for you by the macro). This is
thread-safe, so there is no chance of any race.

IMPORTANT NOTE: I've left the VIR_DEBUG messages in these two init
functions (one for iptables, on for ebtables) as VIR_WARN so that I
don't have to turn on all the other debug message just to see
these. Even if this patch doesn't need any other modification, those
messages need to be changed to VIR_DEBUG before pushing.

This one-time initialization works well. However, I've encountered
problems with testing:

1) Whenever I have enabled the firewalld service, *all* attempts to
call firewall-cmd from within libvirtd end with firewall-cmd hanging
internally somewhere. This is *not* the case if firewall-cmd returns
non-0 in response to "firewall-cmd --state" (i.e. *that* command runs
and returns to libvirt successfully.)

2) If I start libvirtd while firewalld is stopped, then start
firewalld later, this triggers libvirtd to reload its iptables rules,
however it also spits out a *ton* of complaints about deletion failing
(I suppose because firewalld has nuked all of libvirt's rules). I
guess we need to suppress those messages (which is a more annoying
problem to fix than you might think, but that's another story).

3) I noticed a few times during this long line of errors that
firewalld made a complaint about "Resource Temporarily
unavailable. Having libvirtd access iptables commands directly at the
same time as firewalld is doing so is apparently problematic.

4) In general, I'm concerned about the "set it once and never change
it" method - if firewalld is disabled at libvirtd startup, causing
libvirtd to always use iptables/ebtables directly, this won't cause
*terrible* problems, but if libvirtd decides to use firewall-cmd and
firewalld is later disabled, libvirtd will not be able to recover.

Generating "Unable to add lockspace /lock/space/dir/__LIBVIRT__DISKS__:
No such file or directory" is correct but not exactly clear. This patch
changes the error message to "Unable to create lockspace
/lock/space/dir/__LIBVIRT__DISKS__: parent directory does not exist or
is not a directory".

When running libvirtd from a build directory, libvirtd would load lock
drivers from system directory unless explicitly overridden by setting
LIBVIRT_LOCK_MANAGER_PLUGIN_DIR environment variable. Since we already
autodetect driver directory if libvirt is build with driver modules, we
can use the same trick to automagically set lock driver directory.

Commit 1d22ba95 was complete at the time, but we have since
reintroduced a warning that is fixed in the same manner:

  CCLD   storagebackendsheepdogtest

*** Warning: Linking the executable storagebackendsheepdogtest against the loadable module
*** libvirt_driver_storage.so is not portable!

* src/Makefile.am (libvirt_driver_storage.la): Factor into new
convenience library libvirt_driver_storage_impl.la.
* tests/Makefile.am (storagebackendsheepdogtest_LDADD): Link to
convenience library, not shared library.

Our existing STRNEQ_NULLABLE() triggered a warning in gcc 4.7 when
used with a literal NULL argument:

qemumonitorjsontest.c: In function 'testQemuMonitorJSONGetMachines':
qemumonitorjsontest.c:289:5: error: null argument where non-null required (argument 1) [-Werror=nonnull]

even though the strcmp is provably dead when a null argument is
present.  Squelch the warning by refactoring things so that gcc
never sees strcmp() called with NULL arguments (we still compare
NULL as not equal to "", this rewrite merely aids gcc).

Next, gcc has a valid warning about a literal NULLSTR(NULL):

qemumonitorjsontest.c:289:5: error: invalid application of 'sizeof' to a void type [-Werror=pointer-arith]

Of course, you'd never write NULLSTR(NULL) directly, but it is
handy to use through macros.  But the entire part about verify_true()
is unnecessary - gcc already warns about type mismatch with ?:,
without needing to make it more complex.

* src/internal.h (STREQ_NULLABLE, STRNEQ_NULLABLE): Avoid gcc 4.7
stupidity.
(NULLSTR): Simplify, to allow passing compile-time constants.

The DAC security driver uses the virStrToLong_ui function to
parse the uid/gid out of the seclabel string. This works on
Linux where 'uid_t' is an unsigned int, but on Mingw32 it is
just an 'int'. This causes compiler warnings about signed/
unsigned int pointer mis-match.

To avoid this, use explicit 'unsigned int ouruid' local
vars to pass into virStrToLong_ui, and then simply assign
to the 'uid_t' type after parsing
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This patch adds URI options to support libssh2 transport in the remote
driver.

A new transport sceme is introduced eg. "qemu+libssh2://..." that
utilizes the libssh2 code added in previous patches.

The libssh2 code requires the authentication callback to be able to
perform keyboard-interactive authentication or to ask t passprhases or
add host keys to known hosts database.

Added URI components:
- known_hosts -  path to a knownHosts file in OpenSSH format to check
                 for known ssh host keys
- known_hosts_verify - how to deal with server key verification:
                            * "normal" (default) - ask to add new keys
                            * "auto" - automaticaly add new keys
                            * "ignore" - don't validate host keys
- sshauth - authentication methods to use. Default is
            "agent,privkey,keyboard-interactive". It's a comma separated
            string of methods to try while authenticating. The order is
            preserved. Some of the methods may require additional
            parameters.

Locations of the known_hosts file and private keys are set to default
values if they're present. (~/.ssh/known_hosts, ~/.ssh/id_rsa,
                            ~/.ssh/id_dsa)

This patch adds a glue layer to enable using libssh2 code with the
network client code.

As in the original client implementation, shell code is sent to the
server to detect correct options for netcat and connect to libvirt's
unix socket.

This patch enables virNetSocket to be used as an ssh client when
properly configured.

This patch adds function virNetSocketNewConnectLibSSH2() that takes all
needed parameters and creates a libssh2 session and performs steps
needed to open the connection and then create a virNetSocket that
seamlesly encapsulates the communication.

This patch adds helper functions that enable us to use libssh2 in
conjunction with libvirt's virNetSockets for ssh transport instead of
spawning "ssh" client process.

This implemetation supports tunneled plaintext, keyboard-interactive,
private key, ssh agent based and null authentication. Libvirt's Auth
callback is used for interaction with the user. (Keyboard interactive
authentication, adding of host keys, private key passphrases). This
enables seamless integration into the application using libvirt. No
helpers as "ssh-askpass" are needed.

Reading and writing of OpenSSH style "known_hosts" files is supported.

Communication is done using SSH exec channel, where the user may specify
arbitrary command to be executed on the remote side and reads and writes
to/from stdin/out are sent through the ssh channel. Usage of stderr is
not (yet) supported.

This test case validates the correct generation of SELinux labels
for VMs, wrt the current process label. Since we can't actually
change the label of the test program process, we create a shared
library libsecurityselinuxhelper.so which overrides the getcon()
and setcon() libselinux.so functions. When started the test case
will check to see if LD_PRELOAD is set, and if not, it will
re-exec() itself setting LD_PRELOAD=libsecurityselinuxhelper.so
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Currently the dynamic label generation code will create labels
with a sensitivity of s0, and a category pair in the range
0-1023. This is fine when running a standard MCS policy because
libvirtd will run with a label

  system_u:system_r:virtd_t:s0-s0:c0.c1023

With custom policies though, it is possible for libvirtd to have
a different sensitivity, or category range. For example

  system_u:system_r:virtd_t:s2-s3:c512.c1023

In this case we must assign the VM a sensitivity matching the
current lower sensitivity value, and categories in the range
512-1023
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The code to refactor sec label handling accidentally changed the
SELinux driver to use the 'domain_context' when generating the
image label instead of the 'file_context'
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>