Most severe here is a latent (but currently untriggered) memory leak
if any hypervisor ever adds a string interface property; the
remainder are mainly cosmetic.

* include/libvirt/libvirt.h.in (VIR_DOMAIN_BANDWIDTH_*): Move
macros closer to interface that uses them, and document type.
* src/libvirt.c (virDomainSetInterfaceParameters)
(virDomainGetInterfaceParameters): Formatting tweaks.
* daemon/remote.c (remoteDispatchDomainGetInterfaceParameters):
Avoid memory leak.
* src/libvirt_public.syms (LIBVIRT_0.9.9): Sort lines.
* src/libvirt_private.syms (domain_conf.h): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSetInterfaceParameters): Fix
comments, break long lines.

The APIs are used to set/get domain's network interface's parameters.
Currently supported parameters are bandwidth settings.

* include/libvirt/libvirt.h.in: new API and parameters definition
* python/generator.py: skip the Python API generation
* src/driver.h: add new entry to the driver structure
* src/libvirt_public.syms: export symbols

Set up the types for the numa functions and insert them into the
virDriver structure definition.

This patch add new pulic API virDomainSetBlockIoTune and
virDomainGetBlockIoTune.
Signed-off-by: NLei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

The new API is named as "virDomainBlockResize", intending to add
support for qemu monitor command "block_resize" (both HMP and QMP).

Similar with APIs like "virDomainSetMemoryFlags", the units for
argument "size" is kilobytes.

Implement the public definitions for the new API
virNodeSuspendForDuration() which will be subsequently used to
do a timed suspend on the host.

This API can be used to check if the socket associated with
virConnectPtr is still open or it was closed (probably because keepalive
protocol timed out). If there the connection is local (i.e., no socket
is associated with the connection, it is trivially always alive.

virConnectSetKeepAlive public API can be used by a client connecting to
remote server to start using keepalive protocol. The API is handled
directly by remote driver and not transmitted over the wire to the
server.

The virDomainOpenGraphics API allows a libvirt client to pass in
a file descriptor for an open socket pair, and get it connected
to the graphics display of the guest. This is limited to working
with local libvirt hypervisors connected over a UNIX domain
socket, since it will use UNIX FD passing

* include/libvirt/libvirt.h.in: Define virDomainOpenGraphics
* src/driver.h: Define driver for virDomainOpenGraphics
* src/libvirt_public.syms, src/libvirt.c: Entry point for
  virDomainOpenGraphics
* src/libvirt_internal.h: VIR_DRV_FEATURE_FD_PASSING

The previous API addition allowed traversal up the hierarchy;
this one makes it easier to traverse down the hierarchy.

In the python bindings, virDomainSnapshotNumChildren can be
generated, but virDomainSnapshotListChildrenNames had to copy
from the hand-written example of virDomainSnapshotListNames.

* include/libvirt/libvirt.h.in (virDomainSnapshotNumChildren)
(virDomainSnapshotListChildrenNames): New prototypes.
(VIR_DOMAIN_SNAPSHOT_LIST_DESCENDANTS): New flag alias.
* src/libvirt.c (virDomainSnapshotNumChildren)
(virDomainSnapshotListChildrenNames): New functions.
* src/libvirt_public.syms: Export them.
* src/driver.h (virDrvDomainSnapshotNumChildren)
(virDrvDomainSnapshotListChildrenNames): New callbacks.
* python/generator.py (skip_impl, nameFixup): Update lists.
* python/libvirt-override-api.xml: Likewise.
* python/libvirt-override.c
(libvirt_virDomainSnapshotListChildrenNames): New wrapper function.

Add new public api for 'reset'.
It can reset domain immediately without any guest shutdown.
Signed-off-by: NXu He Jie <xuhj@linux.vnet.ibm.com>

Although a client can already obtain a snapshot's parent by
dumping and parsing the xml, then doing a snapshot lookup by
name, it is more efficient to get the parent in one step, which
in turn will make operations that must traverse a snapshot
hierarchy easier to perform.

* include/libvirt/libvirt.h.in (virDomainSnapshotGetParent):
Declare.
* src/libvirt.c (virDomainSnapshotGetParent): New function.
* src/libvirt_public.syms: Export it.
* src/driver.h (virDrvDomainSnapshotGetParent): New callback.

These functions access internals of the opaque object, and do
not need any rpc counterpart.  It could be argued that we should
have provided these when snapshot objects were first introduced,
since all the other vir*Ptr objects have at least a GetName accessor.

* include/libvirt/libvirt.h.in (virDomainSnapshotGetName)
(virDomainSnapshotGetDomain, virDomainSnapshotGetConnect): Declare.
* src/libvirt.c (virDomainSnapshotGetName)
(virDomainSnapshotGetDomain, virDomainSnapshotGetConnect): New
functions.
* src/libvirt_public.syms: Export them.

Includes impl of python binding since the generator was not
able to cope.

Note: Requires gendispatch.pl patch from Matthias Bolte

https://www.redhat.com/archives/libvir-list/2011-August/msg01367.html

Set up the types for the block pull functions and insert them into the
virDriver structure definition.  Symbols are exported in this patch to
prevent
documentation compile failures.

* include/libvirt/libvirt.h.in: new API
* src/driver.h: add the new entry to the driver structure
* python/generator.py: fix compiler errors, the actual python bindings
* are
  implemented later
* src/libvirt_public.syms: export symbols
* docs/apibuild.py: Extend 'unsigned long' parameter exception to this
* API

Modifying the xml on either save or restore only gets you so
far - you have to remember to 'virsh dumpxml dom' just prior
to the 'virsh save' in order to have an xml file worth modifying
that won't be rejected due to abi breaks.  To make this more
powerful, we need a way to grab the xml embedded within a state
file, and from there, it's not much harder to also support
modifying a state file in-place.

Also, virDomainGetXMLDesc didn't document its flags.

* include/libvirt/libvirt.h.in (virDomainSaveImageGetXMLDesc)
(virDomainSaveImageDefineXML): New prototypes.
* src/libvirt.c (virDomainSaveImageGetXMLDesc)
(virDomainSaveImageDefineXML): New API.
* src/libvirt_public.syms: Export them.
* src/driver.h (virDrvDomainSaveImageGetXMLDesc)
(virDrvDomainSaveImgeDefineXML): New driver callbacks.

This introduces new API virDomainDestroyFlags to allow
domain destroying with flags, as the existing API virDomainDestroy
misses flags.

The set of flags is defined in virDomainDestroyFlagsValues enum,
which is currently commented, because it is empty.

Calling this API with no flags set (@flags == 0) is equivalent calling
virDomainDestroy.

In order to choose whether to use O_DIRECT when saving a domain image
to a file, we need a new flag.  But virDomainSave was implemented
before our policy of all new APIs having a flag argument.  Likewise
for virDomainRestore when restoring from a file.

The new flag name is chosen as CACHE_BYPASS so as not to preclude
a future solution that uses posix_fadvise once the Linux kernel has
a smarter implementation of that interface.

* include/libvirt/libvirt.h.in (virDomainCreateFlags)
(virDomainCoreDumpFlags): Add a flag.
(virDomainSaveFlags, virDomainRestoreFlags): New prototypes.
* src/libvirt.c (virDomainSaveFlags, virDomainRestoreFlags): New API.
* src/libvirt_public.syms: Export them.
* src/driver.h (virDrvDomainSaveFlags, virDrvDomainRestoreFlags):
New driver callbacks.

This introduces a new API virDomainUndefineFlags to control the
domain undefine process, as the existing API virDomainUndefine
doesn't support flags.

Currently only flag VIR_DOMAIN_UNDEFINE_MANAGED_SAVE is supported.
If the domain has a managed save image, including
VIR_DOMAIN_UNDEFINE_MANAGED_SAVE in @flags will also remove that
file, and omitting the flag will cause undefine process to fail.

This patch also changes the behavior of virDomainUndefine, if the
domain has a managed save image, the undefine will be refused.

We already have a public virDomainPinVcpu, which implies that
Pin and Vcpu are treated as separate words.  Unreleased commit
e261987c introduced virDomainGetVcpupinInfo as the first public
API that used Vcpupin, although we had prior internal uses of
that spelling.  For consistency, change the spelling to be two
words everywhere, regardless of whether pin comes first or last.

* daemon/remote.c: Treat vcpu and pin as separate words.
* include/libvirt/libvirt.h.in: Likewise.
* src/conf/domain_conf.c: Likewise.
* src/conf/domain_conf.h: Likewise.
* src/driver.h: Likewise.
* src/libvirt.c: Likewise.
* src/libvirt_private.syms: Likewise.
* src/libvirt_public.syms: Likewise.
* src/libxl/libxl_driver.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/remote/remote_driver.c: Likewise.
* src/xen/xend_internal.c: Likewise.
* tools/virsh.c: Likewise.
* src/remote/remote_protocol.x: Likewise.
* src/remote_protocol-structs: Likewise.
Suggested by Matthias Bolte.

This patch introduces a new libvirt API (virDomainGetVcpupinInfo),
as a counterpart to virDomainPinVcpuFlags.

We can use virDomainGetVcpus API to retrieve CPU affinity information,
but can't use this API against inactive domains (at least in case of KVM),
as it lacks a flags parameter.
The usual thing is to add a new virDomainGetVcpusFlags, but that API name
is already occupied by the counterpart to virDomainGetMaxVcpus, which
has a completely different signature.

The virDomainGetVcpupinInfo is the new API to retrieve CPU affinity
information of active and inactive domains.  While the usual convention
is to list an array before its length, this API violates that rule
in order to be more like virDomainGetVcpus (where maxinfo was doing
double-duty as the length of two different arrays).
Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>

This reverts commit 7d56a16d.

Conflicts:

	python/generator.py
	src/libvirt_public.syms

Since we virEventRegisterDefaultImpl is now a public API, callers need
a way to invoke the default registered Handle and Timeout functions. We
already have general functions for these internally, so promote
them to the public API.

v2:
    Actually add APIs to libvirt.h

The API can be used to query current state of an interface to VMM used
to control a domain. In QEMU world this translates into monitor
connection.

Set up the types for the block pull functions and insert them into the
virDriver structure definition.  Symbols are exported in this patch to prevent
documentation compile failures.

* include/libvirt/libvirt.h.in: new API
* src/driver.h: add the new entry to the driver structure
* python/generator.py: fix compiler errors, the actual python bindings are
  implemented later
* src/libvirt_public.syms: export symbols
Signed-off-by: NAdam Litke <agl@us.ibm.com>

Signed-off-by: NMinoru Usui <usui@mxm.nes.nec.co.jp>

Signed-off-by: NMinoru Usui <usui@mxm.nes.nec.co.jp>

Add public virDomainSendKey() and enum libvirt_keycode_set
for the @codeset.

Python version of virDomainSendKey() has not been implemented yet,
it will be done soon.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>

This patch introduces a new libvirt API virDomainPinVcpuFlags,
a direct extension from the existing virDomainPinVcpu

If we can choose live or config when setting, then we need to
be able to choose which one we are querying.

Also, make the documentation clear that set must use a non-empty
subset (some of the hypervisors fail if params is NULL).

* include/libvirt/libvirt.h.in
(virDomainGetSchedulerParametersFlags): New prototype.
* src/libvirt.c (virDomainGetSchedulerParametersFlags): Implement
it.
* src/libvirt_public.syms: Export it.
* python/generator.py (skip_impl): Don't auto-generate.
* src/driver.h (virDrvDomainGetSchedulerParametersFlags): New
callback.

This is the API agreed on in:

  https://www.redhat.com/archives/libvir-list/2011-May/msg00026.html

(with a slight name change to use "...begin" rather than
"...start"). This implements transactional changes to the host network
config. When a transaction is begun with ncf_change_begin(), all other
netcf APIs will continue to work as they always have, but a snapshot
of the existing config will be taken, allowing reversion (rollback,
using ncf_change_rollback()) to the exact state of config at the time
ncf_change_begin() was called. Alternately, if it's determined that
the new changes are acceptable, ncf_change_commit() can be called,
which will eliminate the snapshot and make the changes permanent.

As a failsafe measure, if neither ncf_change_commit() or
ncf_change_rollback() is called by the next time the system reboots,
the netcf-transaction initscript will be automatically called to
rollback the changes.

There are two pieces of information which are desirable for
migration, which cannot be supplied by applications

 - The explicit QEMU migration URI, while using Peer2Peer
   migration
 - An override for the target VM XML

This introduces two new public APIs to support these extra
parameters. There is no need for extra wire protocool changes,
since this is supported by the v3 migration enhancements

* include/libvirt/libvirt.h.in,
  src/libvirt.c, src/libvirt_public.syms: Add virDomainMigrate2
  and virDomainMigrateToURI2

This new function allows aditional flags to be passed into from
the virsh command line.

This API is supposed to replace virDomainGetInfo when the only purpose
of calling it is getting current domain status.

Add public API for taking screenshots of current domain console.

* include/libvirt/libvirt.h.in: add virDomainScreenshot
* src/libvirt_public.syms: Export new symbol

New APIs are added allowing streaming of content to/from
storage volumes.

* include/libvirt/libvirt.h.in: Add virStorageVolUpload and
  virStorageVolDownload APIs
* src/driver.h, src/libvirt.c, src/libvirt_public.syms: Stub
  code for new APIs
* src/storage/storage_driver.c, src/esx/esx_storage_driver.c:
  Add dummy entries in driver table for new APIs

It is possible to set a migration speed limit when starting
migration. This new API allows the speed limit to be changed
on the fly to adjust to changing conditions

* src/driver.h, src/libvirt.c, src/libvirt_public.syms,
  include/libvirt/libvirt.h.in: Add virDomainMigrateSetMaxSpeed
* src/esx/esx_driver.c, src/lxc/lxc_driver.c,
  src/opennebula/one_driver.c, src/openvz/openvz_driver.c,
  src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
  src/remote/remote_driver.c, src/test/test_driver.c,
  src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
  src/vmware/vmware_driver.c, src/xen/xen_driver.c,
  src/libxl/libxl_driver.c: Stub new API

Implements virDomainSetBlkioParameters and virDomainGetBlkioParameters and initialization
Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com>