Libvirt on x86 parses 'dmidecode' to gather characteristics of host
system. On PowerPC, this is now implemented by reading /proc/cpuinfo
NOTE: memory-DIMM information is not presently implemented.
Acked-by: NDaniel Veillard <veillard@redhat.com>
Acked-by: NDaniel P Berrange <berrange@redhat.com>
Signed-off-by: NPrerna Saxena <prerna@linux.vnet.ibm.com>

When SASL requests auth credentials, try to look them up in the
config file first. If any are found, remove them from the list
that the user is prompted for
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

SASL may prompt for credentials after either a 'start' or 'step'
invocation. In both cases the code to handle this is the same.
Refactor this code into a separate method to reduce the duplication,
since the complexity is about to grow

* src/remote/remote_driver.c: Refactor interaction with SASL
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

* src/util/virauth.c, src/util/virauth.h: Add virAuthGetConfigFilePath
* include/libvirt/virterror.h, src/util/virterror.c: Add
  VIR_FROM_AUTH error domain
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Ensure that the functions in virauth.h have names matching the file
prefix, by renaming  virRequest{Username,Password} to
virAuthGet{Username,Password}
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

To follow latest naming conventions, rename src/util/authhelper.[ch]
to src/util/virauth.[ch].

* src/util/authhelper.[ch]: Rename to src/util/virauth.[ch]
* src/esx/esx_driver.c, src/hyperv/hyperv_driver.c,
  src/phyp/phyp_driver.c, src/xenapi/xenapi_driver.c: Update
  for renamed include files
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The '.ini' file format is a useful alternative to the existing
config file style, when you need to have config files which
are hashes of hashes. The 'virKeyFilePtr' object provides a
way to parse these file types.

* src/Makefile.am, src/util/virkeyfile.c,
  src/util/virkeyfile.h: Add .ini file parser
* tests/Makefile.am, tests/virkeyfiletest.c: Test
  basic parsing capabilities
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Convert drivers currently using the qparams APIs, to instead
use the virURIPtr query parameters directly.

* src/esx/esx_util.c, src/hyperv/hyperv_util.c,
  src/remote/remote_driver.c, src/xenapi/xenapi_utils.c: Remove
  use of qparams
* src/util/qparams.h, src/util/qparams.c: Delete
* src/Makefile.am, src/libvirt_private.syms: Remove qparams
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Avoid the need for each driver to parse query parameters itself
by storing them directly in the virURIPtr struct. The parsing
code is a copy of that from src/util/qparams.c  The latter will
be removed in a later patch

* src/util/viruri.h: Add query params to virURIPtr
* src/util/viruri.c: Parse query parameters when creating virURIPtr
* tests/viruritest.c: Expand test to cover params
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Instead of just typedef'ing the xmlURIPtr struct for virURIPtr,
use a custom libvirt struct. This allows us to fix various
problems with libxml2. This initially just fixes the query vs
query_raw handling problems.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Move error reporting out of the callers, into virURIParse
and virURIFormat, to get consistency.

* include/libvirt/virterror.h, src/util/virterror.c: Add VIR_FROM_URI
* src/util/viruri.c, src/util/viruri.h: Add error reporting
* src/esx/esx_driver.c, src/libvirt.c, src/libxl/libxl_driver.c,
  src/lxc/lxc_driver.c, src/openvz/openvz_driver.c,
  src/qemu/qemu_driver.c, src/qemu/qemu_migration.c,
  src/remote/remote_driver.c, src/uml/uml_driver.c,
  src/vbox/vbox_tmpl.c, src/vmx/vmx.c, src/xen/xen_driver.c,
  src/xen/xend_internal.c, tests/viruritest.c: Remove error
  reporting
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The parameter in the virURIFormat impl mistakenly used the
xmlURIPtr type, instead of virURIPtr. Since they will soon
cease to be identical, this needs fixing
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Since we defined a custom virURIPtr type, we should use a
virURIFree method instead of assuming it will always be
a typedef for xmlURIPtr

* src/util/viruri.c, src/util/viruri.h, src/libvirt_private.syms:
  Add a virURIFree method
* src/datatypes.c, src/esx/esx_driver.c, src/libvirt.c,
  src/qemu/qemu_migration.c, src/vmx/vmx.c, src/xen/xend_internal.c,
  tests/viruritest.c: s/xmlFreeURI/virURIFree/
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

To ensure we properly escape & unescape IPv6 numeric addresses,
add a test case

* tests/Makefile.am, tests/viruritest.c: URI parsing test
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Currently the libvirt.service unit file for systemd does not
specify any kill mode. So systemd kills off every process
inside its cgroup. ie all dnsmasq processes, all virtual
machines. This obviously not what we want. Set KillMode=process
so that it only kills the top level process of libvirtd

* daemon/libvirtd.service.in: Add KillMode=process
Reported-By: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Bogus <code/>, and incorrect use of it's instead of its.

virsh.pod had several instances in which it referred to "the
documentation" which was a little puzzling to me since it is
documentation.  Reading the document from end to end makes it clear
that it means a specific URI which was noted previously in the text,
but I had never noticed those URIs in several years of referring to
the man page.  This patch adds those URIs to several additional places
in the text.

    dom.getCPUStats(True, 0)
      [{'cpu_time': 24699446159L, 'system_time': 10870000000L, 'user_time': 950000000L}]
    dom.getCPUStats(False, 0)
      [{'cpu_time': 8535292289L}, {'cpu_time': 1005395355L}, {'cpu_time': 9351766377L}, {'cpu_time': 5813545649L}]

    *generator.py Add a new naming rule
    *libvirt-override-api.xml The API function description
    *libvirt-override.c Implement it.

Detected by valgrind. Leaks are introduced in commit 49556023.

* python/libvirt-override.c (libvirt_virNodeGetCPUStats): fix memory leaks
and improve codes return value.

For details, please see the following link:
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=770943Signed-off-by: NAlex Jia <ajia@redhat.com>

On machines with massive amounts of CPUs, the gnulib 'test-lock'
could take minutes, or even appear to deadlock, because of poor
scaling of timing interactions between multiple cores.

See https://bugzilla.redhat.com/show_bug.cgi?id=797284.
For precedence, note that iwhd has done the same:
https://lists.gnu.org/archive/html/bug-gnulib/2012-01/msg00311.html

We can re-enable things if gnulib ever analyzes and improves the
situation.

* bootstrap.conf (gnulib_tool_option_extras): Avoid lock-tests.

When a client which started non-p2p migration dies in a bad time, the
source libvirtd never clears the migration job and almost nothing can be
done with the domain without restarting the daemon. This patch makes use
of connection close callbacks and ensures that migration job is properly
discarded when the client disconnects.

Add support for registering arbitrary callback to be called for a domain
when a connection gets closed.

Destination daemon should not rely on the client or source daemon
(depending on the type of migration) to call Finish when migration
fails, because the client may crash before it can do so. The domain
prepared for incoming migration is set to be destroyed (and migration
job cleaned up) when connection with the client closes but this is not
enough. If the associated qemu process crashes after Prepare step and
the domain is cleaned up before the connection gets closed, autodestroy
is not called for the domain and migration jobs remains set. In case the
domain is defined on destination host (i.e., it is not completely
removed once destroyed) we keep the job set for ever. To fix this, we
register a cleanup callback which is responsible to clean migration-in
job when a domain dies anywhere between Prepare and Finish steps. Note
that we can't blindly clean any job when spotting EOF on monitor since
normally an API is running at that time.

Add support for registering cleanup callbacks to be run when a domain
transitions to shutoff state.

This reverts commit 61f2b6ba and most of
commit d8916dc8, which effectively
brings back commit ef1065cf written by
Jim Fehlig:

The qemu migration speed default is 32MiB/s as defined in migration.c

/* Migration speed throttling */
static int64_t max_throttle = (32 << 20);

There's no need to throttle migration when targeting a file, so set
migration speed to unlimited prior to migration, and restore to libvirt
default value after migration.

Default units is MB for migrate_set_speed monitor command, so
(INT64_MAX / (1024 * 1024)) is used for unlimited migration speed.

This was reverted because migration to file could not be canceled and
even monitored since qemu was not processing any monitor commands until
the migration finished. This is now different as we make sure the
file descriptor we pass to qemu is able to properly report EAGAIN.
Recent qemu changes might have helped as well.

I tested managedsave with this patch in and indeed, it is 10x faster
while I can still monitor its progress.

Detected by valgrind. Leaks are introduced in commit 17c77955.

* python/libvirt-override.c (libvirt_virNodeGetMemoryStats): fix memory leaks
and improve codes return value.

For details, please see the following link:
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=770944Signed-off-by: NAlex Jia <ajia@redhat.com>

On RHEL 5.7, I got this compilation failure:

In file included from /usr/include/python2.4/pyport.h:98,
                 from /usr/include/python2.4/Python.h:55,
                 from libvirt.c:3:
../gnulib/lib/time.h:468: error: expected ';', ',' or ')' before '__timer'

Turns out that our '#define restrict __restrict' from config.h wasn't
being picked up.  Gnulib _requires_ that all .c files include <config.h>
first, otherwise the gnulib header overrides tend to misbehave.

Problem introduced by patch c700613b.

* python/generator.py (buildStubs): Include <config.h> first.

End tag for "host" element was missing in example configuration

A few times libvirt users manually setting mac addresses have
complained of a networking failure that ends up being due to a multicast
mac address being used for a guest interface. This patch prevents that
by logging an error and failing if a multicast mac address is
encountered in each of the three following cases:

1) domain xml <interface> mac address.
2) network xml bridge mac address.
3) network xml dhcp/host mac address.

There are several other places where a mac address can be input that
aren't controlled in this manner because failure to do so has no
consequences (e.g., if the address will be used to search through
existing interfaces for a match).

The RNG has been updated to add multiMacAddr and uniMacAddr along with
the existing macAddr, and macAddr was switched to uniMacAddr where
appropriate.

If an error was encountered parsing a dhcp host entry mac address or
name, parsing would continue and log a less descriptive error that
might make it more difficult to notice the true nature of the problem.

This patch returns immediately on logging the first error.

This patch is in response to:

  https://bugzilla.redhat.com/show_bug.cgi?id=798467

If a guest's tap device is created using the same MAC address the
guest uses for its own network card (which connects to the tap
device), the Linux kernel will log the following message and traffic
will not pass:

 kernel: vnet9: received packet with own address as source address

This patch disallows MAC addresses with a first byte of 0xFE, but only in
the case that the MAC address is used for a guest interface that's
connected by way of a standard tap device. (In other words, the
validation is done at runtime at the same place the MAC address is
modified for the tap device, rather than when mac address is parsed,
the idea being that it is then we know for sure the address will be
problematic.)

Using inheritance, this patch cleans up the cpu_map.xml file and also
sorts all CPU features according to the feature and registry
values. Model features are sorted the same way as foeatures in the
specification.
Also few models that are related were organized together and parts of
the XML are marked with comments

If a guest is paused, we were silently ignoring the quiesce flag,
which results in unclean snapshots, contrary to the intent of the
flag.  Since we can't quiesce without guest agent support, we should
instead fail if the guest is not running.

Meanwhile, if we attempt a quiesce command, but the guest agent
doesn't respond, and we time out, we may have left the command
pending on the guest's queue, and when the guest resumes parsing
commands, it will freeze even though our command is no longer
around to issue a thaw.  To be safe, we must _always_ pair every
quiesce call with a counterpart thaw, even if the quiesce call
failed due to a timeout, so that if a guest wakes up and starts
processing a command backlog, it will not get stuck in a frozen
state.

* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateDiskActive):
Always issue thaw after a quiesce, even if quiesce failed.
(qemuDomainSnapshotFSThaw): Add a parameter.

This patch fixes a NULL pointer check that was causing SegFault on
some specific configurations. It also reverts commit 59d0c980
that was checking for this value in one place.

Commit af3f9aab taught 'virsh help' to ignore command aliases,
but forgot 'virsh -h'.

* tools/virsh.c (vshUsage): Handle aliases.

A common coding pattern for changing blkio parameters is

  1. virDomainGetBlkioParameters

  2. change one or more params

  3. virDomainSetBlkioParameters

For this to work, it must be possible to roundtrip through
the methods without error. Unfortunately virDomainGetBlkioParameters
will return "" for the deviceWeight parameter for guests by default,
which virDomainSetBlkioParameters will then reject as invalid.

This fixes the handling of "" to be a no-op, and also improves the
error message to tell you what was invalid

How to reproduce:

% valgrind -v --leak-check=full virsh migrate mig \
  qemu+ssh://$dest/system --unsafe

== 8 bytes in 1 blocks are definitely lost in loss record 1 of 28
==    at 0x4A04A28: calloc (vg_replace_malloc.c:467)
==    by 0x3EB7115FB8: xdr_reference (in /lib64/libc-2.12.so)
==    by 0x3EB7115F10: xdr_pointer (in /lib64/libc-2.12.so)
==    by 0x4D1EA84: xdr_remote_string (remote_protocol.c:40)
==    by 0x4D1EAD8: xdr_remote_domain_migrate_prepare3_ret (remote_protocol.c:4772)
==    by 0x4D2FFD2: virNetMessageDecodePayload (virnetmessage.c:382)
==    by 0x4D2789C: virNetClientProgramCall (virnetclientprogram.c:382)
==    by 0x4D0707D: callWithFD (remote_driver.c:4549)
==    by 0x4D070FB: call (remote_driver.c:4570)
==    by 0x4D12AEE: remoteDomainMigratePrepare3 (remote_driver.c:4138)
==    by 0x4CF7BE9: virDomainMigrateVersion3 (libvirt.c:4815)
==    by 0x4CF9432: virDomainMigrate2 (libvirt.c:5454)
==
== LEAK SUMMARY:
==    definitely lost: 8 bytes in 1 blocks
==    indirectly lost: 0 bytes in 0 blocks
==      possibly lost: 0 bytes in 0 blocks
==    still reachable: 126,995 bytes in 1,343 blocks
==         suppressed: 0 bytes in 0 blocks

This patch also fixes the leaks in remoteDomainMigratePrepare and
remoteDomainMigratePrepare2.

* src/libvirt.c (virStorageVolResize): correct comment typo according to
  virStorageVolResizeFlags enum definition.
Signed-off-by: NAlex Jia <ajia@redhat.com>