Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NAlexander Burluka <aburluka@virtuozzo.com>

This functions setups per-domain cpu bandwidth parameters
Signed-off-by: NAlexander Burluka <aburluka@virtuozzo.com>

Signed-off-by: NAlexander Burluka <aburluka@virtuozzo.com>

This parameter controls the maximum bandwidth to be used
within a period for whole domain.
Signed-off-by: NAlexander Burluka <aburluka@virtuozzo.com>

This parameter represents top level period cgroup
that limits whole domain enforcement period for a quota
Signed-off-by: NAlexander Burluka <aburluka@virtuozzo.com>

Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

We don't need locks in dispose functions as they can only
be run in one thread for given object.

closeCallback pointer is immutable (set on connection object creation)
and self-locking.

If connect close is fired then following unregister will fail
as we set callback to NULL and thus callback equality checking
will fail.

Callback is set to NULL to make it fired only one time probabaly.
Instead lets use connection equality to NULL to check if callback
is already fired.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

We have reference to connection object in virConnectCloseCallbackData
object thus we have to refcount it. Obviously we have problems
in dispose and call functions. Let's fix it.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Make register and unregister functions return void because
we can check the state of callback object beforehand via
virConnectCloseCallbackDataGetCallback. This can be done
without race conditions if we use higher level locks for registering
and unregistering. The fact they return void simplifies
task of consistent registering/unregistering.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

qemuProcessSetupEmulator runs at a point in time where there is only
the qemu main thread. Use virCgroupAddTask to put just that one task
into the emulator cgroup. That patch makes virCgroupMoveTask and
virCgroupAddTaskStrController obsolete.
Signed-off-by: NHenning Schild <henning.schild@siemens.com>

Move qemuProcessSetupEmulator up under qemuSetupCgroup. That way
we move the one main thread right into the emulator cgroup, instead
of moving multiple threads later on. And we do not actually want any
threads running in the parent cgroups (cpu cpuacct cpuset).
Signed-off-by: NHenning Schild <henning.schild@siemens.com>

Similarly to the refactors to iothreads and vcpus, move the code that
initializes the emulator thread settings into single function.

This attribute is used to extend secondary PCI bar and expose it to the
guest as 64bit memory.  It works like this: attribute vram is there to
set size of secondary PCI bar and guest sees it as 32bit memory,
attribute vram64 can extend this secondary PCI bar.  If both attributes
are used, guest sees two memory bars, both address the same memory, with
the difference that the 32bit bar can address only the first part of the
whole memory.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1260749Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

We always place primary video device at first place, to make it easier
to create a qemu command or format an xml, but we should also set the
primary boolean for primary video device to 'true'.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Introduce virPolkitAgentCreate and virPolkitAgentDestroy

virPolkitAgentCreate will run the polkit pkttyagent image as an asynchronous
command in order to handle the local agent authentication via stdin/stdout.
The code makes use of the pkttyagent --notify-fd mechanism to let it know
when the agent is successfully registered.

virPolkitAgentDestroy will close the command effectively reaping our
child process

When there isn't a ssh -X type session running and a user has not
been added to the libvirt group, attempts to run 'virsh -c qemu:///system'
commands from an otherwise unprivileged user will fail with rather
generic or opaque error message:

    "error: authentication failed: no agent is available to authenticate"

This patch will adjust the error code and message to help reflect the
situation that the problem is the requested mechanism is UNAVAILABLE and
a slightly more descriptive error. The result on a failure then becomes:

    "error: authentication unavailable: no polkit agent available to
            authenticate action 'org.libvirt.unix.manage'"

A bit more history on this - at one time a failure generated the
following type message when running the 'pkcheck' as a subprocess:

"error: authentication failed: polkit\56retains_authorization_after_challenge=1
Authorization requires authentication but no agent is available."

but, a patch was generated to adjust the error message to help provide
more details about what failed. This was pushed as commit id '96a108c9'.
That patch prepended a "polkit: " to the output. It really didn't solve
the problem, but gave a hint.

After some time it was deemed using DBus API calls directly was a
better way to go (since pkcheck calls them anyway). So, commit id
'1b854c76' (more or less) copied the code from remoteDispatchAuthPolkit
and adjusted it. Then commit id 'c7542573' adjusted the remote.c
code to call the new API (virPolkitCheckAuth). Finally, commit id
'308c0c5a' altered the code to call DBus APIs directly. In doing
so, it reverted the failing error message to the generic message
that would have been received from DBus anyway.

Rename to secretLoadAllConfigs and add the 'driver->configDir' as
a parameter.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

This new API will allocate the secret, assign the def pointer, and
insert the secret onto the passed list. Whether that's the temporary
list in loadSecrets which gets loaded into the driver list or driver
list during secretDefineXML.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add a temporary helper to search for a specific secret by address
on the list and remove it if it's found. The following patch will
introduce a common allocation and listInsert helper. That means
error paths of the routines calling would need a way to remove the
secret off the list.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

This patch removes need for secretBase64Path and secretComputePath. Similar
to the configFile, create an entry for base64File, which will be generated
as the driver->configDir, the UUID value, plus the ".base" suffix. Rather
than generating on the fly, store this in the virSecretObj.

The buildup of the pathname done in loadSecrets where the failure to build
is ignored which is no different than the failure to generate the name
in secretLoadValue which would have been ignored in the failure path
after secretLoad.

This also removes the need for secretComputPath and secretBase64Path.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

This patch removes the need for secretXMLPath. Instead save 'path' during
loadSecret as 'configFile'. The secretXMLPath is nothing more than an
open coded virFileBuildPath.  All that code did was concantenate the
driver->configDir, the UUID of the secret, and the ".xml" suffix to form
the configFile name which we now will generate and save instead.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

The 'secretLoad' was essentially open coding virFileBuildPath.

Adjust the logic to have the caller build the path and pass it. The net
sum of ignoring the virFileBuildPath failure is the same as before where
the failure to virAsprintf the path would have been ignored anyway in
the secretLoad error path.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

This follows other drivers usage model.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Remove one letter variable.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Just renaming the variable in secretConnectListAllSecrets.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Remove the need for the local 'secret' in secretConnectListAllSecrets.
A subsequent patch will rename the ObjPtr entry to secret.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Rename to virSecretObj - preparation for future patch, but also follows
similar code in other drivers.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Use the common API instead of essentially open coding same functionality.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Rather than having it interspersed with other changes, do it once.

Remove a couple ^L, 1 argument per line for functions, less than 80 chars
per line, use of spacing between logical groups of code, use of one line
if statements when doing fetch followed by comparison, use direct return
when no cleanup to be done.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Use virCgroupAddTaskController in virCgroupAddTask so we have one
single point where we add tasks to cgroups.
Signed-off-by: NHenning Schild <henning.schild@siemens.com>

We honour the placement bitmaps when starting up, so there's no point in
having this check. Additionally the check was buggy since it checked
vm->def all the time even if the user requested to modify the persistent
definition which had different configuration.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1308317

Add Spice graphics gl attribute. qemu 2.6 should have -spice gl=on argument to
enable opengl rendering context (patches on the ML). This is necessary to
actually enable virgl rendering.

Add a qemuxml2argv test for virtio-gpu + spice with virgl.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>